Shop – Page 5 – Transducer Shield and Saver

Showing 121–150 of 160 results

In Stock Sale!

TG-DS-9 fits Garmin GT21, GT23, GT41, GT50 and GT51

Ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back. Additional components will be required. This Transducer Shield will not fit the new Garmin GT 36 or GT 56 transducer.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.

Original price was: $149.95.Current price is: $134.95.

Select options
In Stock

TG-DS-Vu to fit Garmin GT30 and GT34

This item is user friendly for various installation options – * Trolling Motor * Side of the Jack Plate * Hole Shot Plate or * Set Back Additional components are required.
When ordering this item, please note in the comment area which transducer you have. Either the Garmin GT30 or GT34 transducer. It is important for us to know this please. This Transducer Shield DOES NOT fit the Garmin GT 36 or GT 56 transducer.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$89.95

Select options
Out Of Stock

TG-TUG to fit Garmin traditional dual beam / dual frequency transducer # 010-10272-00 or 010-10249-20

TG-TUG is Ideal for Installing on a trolling motor. It can also be attached on the side of a jack plate or on the boat set back with additional components.

$139.00

Select options
In Stock Sale!

TG-GT30-3D Transducer Shield to fit Garmin DownVü/SideVü GT30 and Pod GT8HW transducers together

Available Now. Transducer Shield to fit Garmin® DownVü/SideVü GT30-TM Transducer and GT8HW-IH pod transducer in tandem on trolling motors.

Original price was: $224.95.Current price is: $199.95.

Select options
In Stock

TM-AM-TM150-T to fit Airmar Transom transducer on Trolling Motor

Transducer Shield # TM-AM-TM150T to fit Airmar transom style transducer TM150-T onto a Trolling Motor. Please complete the questionnaire when ordering this item.

If your Airmar transducer can be taken apart to remove the pod from inside the casing, then this is not the Transducer Shield for you.

$149.00

Select options
In Stock Sale!

TM-DI fits Humminbird Down Image XNT 9 DI T xDucer for Trolling Motor, Jack Plate or Set Back

TM-DI fits Humminbird® Down Image Transducer # XNT 9 DI T for trolling motor, set back or jack plate installation. It DOES NOT fit the redesigned Down Image transducer # # XNT 9 DI T (RD). Onix Down Image Transducer XNT 14 DI T (RD) or XM 9 MDI T.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

Original price was: $74.95.Current price is: $69.95.

Select options
In Stock

TM-DI-2 fits Humminbird Down Image Xducer # XNT 9 DI T (RD), XM 9 MDI T, Mega XNT 9 HW MDI 75 T or Onix Xducer # XNT 14 DI T (RD) for Trolling Motor, Jack Plate or Set Back

TM-DI-2 fits Humminbird® Down Image Transducer # XNT 9 DI T (RD), XNT 14 DI T (RD) and XNT 9 HW MDI 75 T for trolling motor, set back or jack plate installation. It DOES NOT fit the ORIGINAL Down Image transducer # # XNT 9 DI T.

^NOTE^{: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}

$79.95

Select options
In Stock

TM-HDsi fits Humminbird® HDSI xDucer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T

_{TM-HDSi fits Humminbird® High Definition Side Image Transducer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T for trolling motor, set back or jack plate installation.}

^NOTE^{: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}

$79.95

Select options
In Stock

Garmin Force Rail Kit
$99.95

Add to cart
In Stock

Perspective Mode L Bracket – Garmin Panoptix LiveScope LVS34 transducer on trolling motor shaft or any shaft

Perspective Mode L Bracket Mount used to adjust the position of your Garmin Panoptix LiveScope LVS34 transducer on a trolling motor shaft or any shaft. This item is used along with your Garmin transducer mounting bracket.

$39.95

Add to cart
On backorder

Ram Rail Kit for small Minnkota Trolling Motors

The Ram Rail Kit includes Skeg, 2 stainless steel straps & hardware. The kit can only be installed on a MinnKota trolling motor that has the Prop & Skeg on opposite ends and when the transducer to be attached is too long for the space between the propeller and skeg.

A transducer cannot be attached directly to the Ram Rail Kit and must be purchased along with a specific Transducer Shield to suit your transducer. After purchasing the Ram Rail Kit, click on “Shields” and choose the Transducer Shield to suit your transducer.

This product can be used with most Humminbird, Garmin & Lowrance Transducer Shields made by Transducer Shield and Saver.

Proudly designed and built in USA

$150.00

Select options
In Stock

TM-XTM-75/150 T to fit Humminbird XTM 9 HW MDI 75 T or XTM 9 HW MSI 150 T transducer

TM-XTM-75/150 T fits Humminbird® Helix Mega Di transducer XTM 9 HW MDI 75 T or Helix Mega Si transducer XM 9 HW MSI 150 T. for trolling motor, set back, hole shot plate or jack plate installation.
If this item is going on a Trolling Motor, please answer the trolling motor questions. If this item is going on the Jack Plate please answer all the questions about your jack plate and boat. It is very important that you answer the questionnaire in full please.
NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$99.95

Select options
In Stock

TM-HX-3 fits Humminbird® Helix G2N Mega Si or Solix G1N Si Transducer

TM-HX-3 fits Humminbird® Chirp Helix Mega Si GPS G2N transducer XM 9 20 MSI T or Solix G2N Si XM transducer XM 14 20 MSI T for trolling motor, set back or jack plate installation. If this item is going on a Trolling Motor, please answer the trolling motor questions. If this item is going on the Jack Plate please answer all the questions about your jack plate and boat. It is very important that you answer the questionnaire in full please.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$179.00

Select options
In Stock Sale!

TM-ONIX-1 fits Humminbird Side Image Xducer XT 14 20 HDSI T or XT 14 74 HDSI T

TM-ONIX-1 fits Humminbird® HD Side Image Transducer # XT 14 20 HDSI T or XT 14 74 HDSI T for trolling motor, set back or jack plate installation. It DOES NOT fit the REDESIGNED transducer # XT 14 20 HDSI T (RD). ONIX transducer differences

Original price was: $79.95.Current price is: $59.95.

Select options
In Stock Sale!

TM-ONIX-2 fits Humminbird Side Image Xducer XT 14 20 HDSI T (RD) and XT 14 74 HDSI T (RD)

TM-ONIX-2 fits Humminbird® HD Side Image Transducer # XT 14 20 HDSI T (RD) or XT 14 74 HDSI T (RD) for trolling motor, set back or jack plate installation. It DOES NOT fit the ORIGINAL transducer # XT 14 20 HDSI T or XT 14 74 HDSI T. ONIX transducer differences

Original price was: $84.95.Current price is: $64.95.

Select options
In Stock

Tool Buddy Premium Deluxe TBPDX-BL with Stainless Cup Holder (tools shown are not included)

Tool Buddy Premium Deluxe with Stainless Cup Holder (tools shown are not included)
Item # TBPDX-BL BLACK @ $64.95
Description
* Back Plate 1/4” thick x 11-1/2” Wide x 8-5/8” High with up to six mounting holes
* Shelf (tool holder) 10-7/8” Long x 2-1/2” Wide and 3-5/8” Wide at cup holder
* Cup holder opening 2-11/16 diameter
* Three ¼” holes for diamond files, Eight 1/8” holes for hanging lures and Six tool openings:
* One 2-1/8 x 5/16 for measuring board, One 2-1/8 x 11/16, Two 1-15/16 x 1/2,
* One 1-1/4 x ¾ and One 1-1/4 x ½

$64.95 – $69.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

Tool Buddy Premium TBP-BL without Cup Holder (tools shown are not included)

Tool Buddy Premium without Cup Holder (tools shown are not included)
Item # TBP-BL     BLACK @ $49.95
Item # TBP-WH     WHITE @ 54.95 (Special Order – allow 4-6 weeks)

Description
* Back Plate 1/4” thick x 7-1/2″ Wide x 8-5/8” High with two mounting holes
* Shelf (tool holder) 7-1/8″ Long x 2-1/2” Depth
* Two ¼” holes for diamond files, Eight 1/8” holes for hanging lures and Six tool openings:
* One 2-1/8 x 5/16 for measuring board, One 2-1/8 x 11/16, Two 1-15/16 x 1/2,
* One 1-1/4 x ¾ and One 1-1/4 x ½

$49.95 – $54.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

Tool Buddy Sport Deluxe TBSDX-BL with Stainless Cup Holder (tools shown are not included)

Tood Buddy Sport Deluxe with Stainless Cup Holder (tools shown are not included)
Item # TBSDX-BL BLACK @ $54.95

Description
* Back Plate 1/4” thick x 8-8-7/8″ Wide x 8-5/8” High with two mounting holes
* Shelf (tool holder) 8-5/8” Long x 2-1/2” Wide x 3/8 Thick and 3-5/8” Wide at cup holder
* Cup holder opening 2-11/16 diameter
* One ¼” hole for diamond file, Six 1/8” holes for hanging lures & Four tool openings
* One 2-1/8 x 5/16 for measuring board, One 2-1/8 x 11/16, Two 1-15/16 x ½

$54.95 – $59.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

Tool Buddy Sport TBS-BL without Cup Holder (tools shown are not included)

Tood Buddy Sport without cupholder   (tools shown are not included)
Item # TBS-BL      BLACK @ $39.95
Item # TBS-WH     WHITE @ $44.95 (Special Order – allow 4-6 weeks)
Description
* Back Plate 1/4” thick x 5-1/2″ Wide x 8-5/8” High with two mounting holes
* Shelf (tool holder) 5-1/4” Long x 2-1/2” Wide x 3/8 Thick
* One ¼” hole for diamond file, Six 1/8” holes for hanging lures & Four tool openings
* One 2-1/8 x 5/16 for measuring board, One 2-1/8 x 11/16, Two 1-15/16 x ½

$39.95 – $44.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock Sale!

TS-DSI fits Lowrance DSI xDucer 000-10260-001 for Trolling Motor or Jack Plate install

Fits Lowrance Down Scan Skimmer transducer # 10260-001
not for use directly on transom. Please see additional accessories.
(Transducer is not included)

Original price was: $69.95.Current price is: $49.95.

Select options
In Stock

TS-HDI-3 fits Lowrance HDI xDucer (50/200kHz) 000-10977-001 for Trolling Motor or Jack Plate install

Fits Lowrance® Elite HDI (Hybrid Dual Imaging) Skimmer transducer # 000-10977-001 (50/200kHz)

$89.95

Select options
In Stock

TS-HDI-4 fits Lowrance HDI (83/200kHz) Transducer # 000-10976-001, # 000-12728-001 & # 000-12570-001

Fits Lowrance® HDI (Hybrid Dual Imaging) 83/200kHz Skimmer transducer # 000-10976-001. # 000-12728-001 & # 000-12570-001. It can be attached to a trolling motor, to the side of a Jack Plate with an L Bracket, or on a hole shot plate (under the jack plate) with a Wedge

$89.95

Select options
In Stock

TS-LIVE-S to attach Lowrance LiveSight xDucer # 000-14458-001 on Jack Plate, Hole Shot or Transom Set Back

This item is presently on Back Order. Estimated Ship Date September 7th. If you an order is placed, it will be held on back order and shipped as soon as it becomes available. Thank you for your patience.

TS-LIVE-S to attach a Lowrance® LiveSight™ transducer # 000-14458-001 on a Jack Plate, Hole Shot Plate or Set Back.

It is very important to complete the questionnaire below in full when ordering this item.

$199.95

Select options
In Stock

TS-LSS-1 to fit Lowrance LSS1 Structure Scan xDucer on a Jack Plate & some Trolling Motors

This Transducer Shield® can be installed on a Trolling Motor that has a Built In Sonar in the cone, OR on a Jack Plate, Hole Shot Plate or Set Back. Additional components will be required.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
It is Very Important that you complete the questionnaire when ordering this item.

$149.00

Select options
In Stock

TS-LSS-2 fits Lowrance LSS1 Structure Scan xDucer on a Set Back or Hole Shot Plate

Fits Lowrance® LSS1 Structure Scan Transducer for Set Back or Hole Shot Plate Application.
See TS-LSS2-L to fit the new LSS2 (10″)transducer

$79.95

Select options
In Stock

TS-LSS-3D fits Lowrance LSS1 Structure Scan & Pod xDucers together usually on a Trolling Motor

Fits Lowrance® LSS1 (6″) Structure Scan Transducer with the Lowrance® Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$185.00

Select options
Out Of Stock

TS-LSS-3D-AM to fit Lowrance LSS1 and Airmar TM150 pod transducer

Fits Lowrance® LSS1 (6″) Structure Scan Transducer with an Airmar® (TM150M) Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$185.00

Select options
In Stock

TS-LSS2-2L fits Lowrance LSS2 Structure Scan Transducer on a Set Back or Hole Shot Plate

Fits Lowrance LSS2 structure scan 10-1/4″ transducer for installation on SetBack/Step OR Hole Shot/Baffle plates.
NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
It is very important that you complete the questionnaire when ordering this item.

$99.95

Select options
In Stock

TS-LSS2-3D fits Lowrance LSS2 Structure Scan & Pod xDucer together usually on a Trolling Motor

^{Transducer Shield to fit Lowrance LSS2 (10-1/4″) structure scan transducer and pod transducer in tandem on trolling motors. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$224.95

Select options
In Stock

TS-LSS2-3D-AM to fit Lowrance LSS2 structure scan and Airmar TM150 pod transducer

Fits Lowrance® LSS2 (10-1/4″) Structure Scan Transducer with an Airmar® (TM150M) Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$224.95

Select options

CLOSE

My Account
Search

Search for:
0