Showing 61–90 of 160 results
-
Lift Assist Booster # L A B (trolling motor lift assist)
$299.95 – $439.95Item # L A B (Lift Assist Booster) This product will make deploying and retrieving your trolling motor so much easier.
Please type in the required information
in the boxes below.By choosing the Riser Kit option, it will increase the price of the Lift
Assist Booster by $99.95 -
D-111-C Combo – Ram Mount including B-4-CM base plate with cable management
$149.95Ram Mount for larger Lowrance and Humminbird units. Features an 11″ x 3″ mounting plate with a 2 1/4″ ball and 3-1/2″ base. Includes 4″ Round Base Plate Item # B-4-CM and s.steel mounting hardware.
-
D-111-C Ram Mount
$125.95Ram Mount for larger Lowrance, Eagle and Humminbird units. Features an 11″ x 3″ base plate,2 1/4″ ball & 3-1/2″ base. Includes s.steel mounting hardware.
-
Dek-It 0.0 Fish Finder Mount
$114.95Electronics Mount Model Dek-It 0.0° suitable for mounting electronics on the bow of the boat. Dimensions 15.5” L x 5.5” W x 4”H
-
Dek-It 22.5° Fish Finder Mount
$125.95Electronics Mount Model Dek-It 22.5° suitable for mounting electronics on the bow of the boat.
Dimensions 15.5” L x 5.5” W x 4.5”H -
Do’Nut Trolling Motor Rod Support
$14.95Trolling Motor Support Rod DO’NUT fits Minnkota Trolling Motors
1/2″ Black Polyethylene Marine Board x 2-1/4 Diameter and attaches to the deck with three (3) # 8 x 1″ stainless steel phillips pan head screws which are included in the package.
-
EXT-1.5″ Extension
$35.00Aluminum 1.5″ Extension attached to an L. Bracket and Transducer Shield to lower the level of the transducer. This item is sometimes required on Skeeter & Bass Cat boats.
-
EXT-3.0 Extension
$40.00Aluminum extension attached between an L Bracket and Transducer Shield will lower the transducer if turning chines or trim tabs interfere with transducer side signal
-
TG-DS-8.4 fits Garmin GT40
Original price was: $139.95.$125.95Current price is: $125.95.TG-DS-8.4 Transducer Shield is ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back. Additional components will be required. NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane. For bottom reading on plane, a transducer inside the hull will be required. It is very important that you complete the questionnaire when ordering this item.
-
-
TG-HG-8.5 Transducer Shield to fit Garmin GT 56 or GT 36
$159.00TG-HG-8.5 Transducer Shield ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back. Additional components will be required.
NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane. For bottom reading on plane, a transducer inside the hull will be required.
-
FISH SNIFF FIBER POLE
$399.00 – $498.95Introducing the “FISH SNIFF FIBER POLE” featuring our Innovative Hand Operated Stainless Steel Flexible Drive System! The FSFP can easily be attached to the MinnKota Ultrex, Lowrance Ghost, MotorGuide Tour/Tour Pro or Garmin Force trolling motor with our Receiver Ring Bracket System. This allows you to OPERATE & POSITION the Garmin Panoptix, Lowrance Active Target or Humminbird Mega Live.
-
TG-GT-6 to fit Garmin GT22, GT24, GT52 or GT54
$109.95Choose this item to attach a Garmin® Transducers GT 22, GT 24, GT52 or GT54 on a Trolling Motor, Jack Plate or Transom Set Back. This Transducer Shield will not fit the new Garmin GT 36 or GT56 transducer.
NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.
-
Full Receiver Ring Garmin Force Trolling Motor
$199.00The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.
The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.
Check out the additional T S & S product accessories available to attach to our Receiver Ring system:
* ACC-RR-360 is designed for the Humminbird 360
* ACC-TL is designed for the Humminbird TargetLock
* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”
* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5
The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts
Proudly Designed and Built in Alabama USA
See More Fish ………. Catch More Fish
-
Full Receiver Ring Lowrance Ghost Trolling Motor
$199.00The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.
The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.
Check out the additional T S & S product accessories available to attach to our Receiver Ring system:
* ACC-RR-360 is designed for the Humminbird 360
* ACC-TL is designed for the Humminbird TargetLock
* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”
* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5
The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts
Proudly Designed and Built in Alabama USA
See More Fish ………. Catch More Fish
-
Full Receiver Ring Minnkota Ultrex Trolling Motor
$199.00The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.
The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.
Check out the additional T S & S product accessories available to attach to our Receiver Ring system:
* ACC-RR-360 is designed for the Humminbird 360
* ACC-TL is designed for the Humminbird TargetLock
* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”
* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5
The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts
Proudly Designed and Built in Alabama USA
See More Fish ………. Catch More Fish
-
TM-H8.3 fits Humminbird® Solix or Helix Mega G2N, G3N or G4N Mega MSI T Transducer
$179.00TM-H-8.3 fits Humminbird® Solix Mega Si GPS G2N, G3N transducer XM 14 HW MSI T or Helix Mega Si GPS G3N or G4N transducer XM 9 HW MSI T, XTM 9 HW MSI T or XM 14 HW MSI T. If this item is going on a Trolling Motor, please answer the trolling motor questions. If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.
NOTE: A transducer attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, will not track the bottom when the boat is up on plane. An in hull transducer will be required or recommended to track the bottom when the boat is up on plane.
-
TM-H7.1 fits Humminbird® Solix Mega G2N or G3N DiTransducer XM 14 HW MDI T or Helix Mega G3N or G4N Di Transducer XM 9 HW MDI T
$179.00TM-H-7.1 fits Humminbird® SOLIX Mega Di GPS G2N transducer XM 14 HW MDI T or XTM 14 HW MDI T or Helix Mega Di GPS G3N transducer XM 9 HW MDI T or XTM 9 HW MDI T for trolling motor, set back, hole shot plate or jack plate installation. If this item is going on a Trolling Motor, please answer the trolling motor questions. If this item is going on the Jack Plate please answer all the questions about your jack plate and boat. It is very important that you answer the questionnaire in full please.
NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
-
TM-CMSI-7.1 fits Humminbird® Transducer XM 14 HW CMSI T – Compact MEGA Side Imaging+ Transducer
$179.00TM-CMSI-7.1 fits Humminbird® Transducer XM 14 HW CMSI T
-
Grass Off Deflector Rod to fit Minnkota & Motorguide 24v and 36v trolling motors
$49.95Eliminate and reduce the accumulation of vegetation on top of trolling motor. Suitable for Motorguide 24v, 36v and Minnkota 24v, 36v 101 and 112 trolling motors. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.
-
Humminbird 360 Accessory
$418.00 – $448.00Item # ACC-RR-360 is an accessory designed to attach a Humminbird 360 to a Trolling Motor using our Mini Receiver Ring or Full Receiver Ring.
Both the ACC-RR-360 and Receiver Ring system are built in 6061 x 3/4″ aircraft aluminum alloy, black powder coated and includes all stainless steel hardware and easy installation instructions.
Proudly Designed and Built in the USA
See More Fish ………. Catch More Fish
-
Humminbird Target Lock Accessory Bracket Item # ACC-TL
$199.00Item # ACC-TL “Accessory Target Lock” is built in 6061 aircraft aluminum and black powder coated.
This item would be used in conjunction with our Receiver Ring system to attach a Humminbird® Target Lock to a Garmin®Force, Lowrance® Ghost or Minnkota® Ultrex trolling motor.When our Target Lock Bracket ACC-TL is attached to a Receiver Ring it can be on the left or the right side of the trolling motor.
The Receiver Ring attaches to the trolling motor head and one or two accessories can then be attached.
For example to attach a Humminbird® Mega 360 plus a Humminbird® Target Lock to an Ultrex Trolling Motor, the following products can be used:
ACC-RR-ULT + ACC-TL + ACC-RR-30When placing your order, please choose the correct Receiver Ring for your type of trolling motor.
Our Products are Proudly designed and built in the USA
See More Fish ………. Catch More Fish
-
Humminbird XP 9 20 T Puck Transducer
$79.95Humminbird In Hull Puck Transducer XP 9 20 T
*Easy Glue-in installation inside single layer fiberglass hulls* includes Epoxy Kit and 20′ cable
-
Humminbird Y Cable # 9 M SIDBY # 720101-1 for Mega and all Side Image except Solix
$39.95Humminbird Y Cable allows split signal operation of Humminbird Side Imaging and dual beam transducers.
-
Humminbird Y Cable # 14 M SI DBY for Solix Units
$74.95Humminbird Y Cable used to connect a 2D transducer to a Solix unit.
-
Humminbird Y Cable # AS 14 SI DB Y for Onix
$49.95Humminbird Y Cable allows split signal operation of Humminbird® Side Imaging and dual beam transducers.
-
HW-Bracket to attach a Hydro Wave speaker box to a Minnkota, Motorguide or Power Pole trolling motor shaft
$39.95High Quality Aluminum Bracket to securely attach a Hydro Wave Speaker Box to a trolling motor shaft.
Please complete the questionnaire when ordering this item.
It is VERY important that we know if your trolling motor is an MINNKOTA “ULTREX”
-
HW-BRACKET-3 to attach a Hydro Wave Speaker Box to a Garmin Force, Minnkota Quest or Power Pole Move trolling motor shaft
$39.95High Quality Aluminum Bracket to securely attach a Hydro Wave Speaker Box to a Garmin Force, Minnkota Quest or Power Pole Move trolling motor shaft.
-
Hydro Dynamics Rapid Jack
$49.95L. Adapter Bracket to fit Hydro Dynamics Rapid Jack jack plate. Used with a Transducer Shield to attach transducer to the side of the Jack Plate.
It is very important that you complete the questionnaire in full when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.
