Shop – Page 5 – Transducer Shield and Saver

Showing 121–148 of 148 results

“Tool Buddy Sport Deluxe TBSDX-BL with Stainless Cup Holder (tools shown are not included)” has been added to your cart. View cart

On backorder

TM-HX-3 fits Humminbird® Helix G2N Mega Si or Solix G1N Si Transducer

TM-HX-3 fits Humminbird® Chirp Helix Mega Si GPS G2N transducer XM 9 20 MSI T or Solix G2N Si XM transducer XM 14 20 MSI T for trolling motor, set back or jack plate installation. If this item is going on a Trolling Motor, please answer the trolling motor questions. If this item is going on the Jack Plate please answer all the questions about your jack plate and boat. It is very important that you answer the questionnaire in full please.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$179.00

Select options
In Stock

TM-ONIX-1 fits Humminbird Side Image Xducer XT 14 20 HDSI T or XT 14 74 HDSI T

TM-ONIX-1 fits Humminbird® HD Side Image Transducer # XT 14 20 HDSI T or XT 14 74 HDSI T for trolling motor, set back or jack plate installation. It DOES NOT fit the REDESIGNED transducer # XT 14 20 HDSI T (RD). ONIX transducer differences

$79.95

Select options
In Stock

TM-ONIX-2 fits Humminbird Side Image Xducer XT 14 20 HDSI T (RD) and XT 14 74 HDSI T (RD)

TM-ONIX-2 fits Humminbird® HD Side Image Transducer # XT 14 20 HDSI T (RD) or XT 14 74 HDSI T (RD) for trolling motor, set back or jack plate installation. It DOES NOT fit the ORIGINAL transducer # XT 14 20 HDSI T or XT 14 74 HDSI T. ONIX transducer differences

$84.95

Select options
In Stock

Tool Buddy Premium Deluxe TBPDX-BL with Stainless Cup Holder (tools shown are not included)

Tool Buddy Premium Deluxe with Stainless Cup Holder (tools shown are not included)
Item # TBPDX-BL BLACK @ $64.95
Description
* Back Plate 1/4” thick x 11-1/2” Wide x 8-5/8” High with up to six mounting holes
* Shelf (tool holder) 10-7/8” Long x 2-1/2” Wide and 3-5/8” Wide at cup holder
* Cup holder opening 2-11/16 diameter
* Three ¼” holes for diamond files, Eight 1/8” holes for hanging lures and Six tool openings:
* One 2-1/8 x 5/16 for measuring board, One 2-1/8 x 11/16, Two 1-15/16 x 1/2,
* One 1-1/4 x ¾ and One 1-1/4 x ½

$64.95

Add to cart
In Stock

Tool Buddy Premium TBP-BL without Cup Holder (tools shown are not included)

Tool Buddy Premium without Cup Holder (tools shown are not included)
Item # TBP-BL BLACK @ $49.95

Description
* Back Plate 1/4” thick x 7-1/2″ Wide x 8-5/8” High with two mounting holes
* Shelf (tool holder) 7-1/8″ Long x 2-1/2” Depth
* Two ¼” holes for diamond files, Eight 1/8” holes for hanging lures and Six tool openings:
* One 2-1/8 x 5/16 for measuring board, One 2-1/8 x 11/16, Two 1-15/16 x 1/2,
* One 1-1/4 x ¾ and One 1-1/4 x ½

$49.95

Add to cart
In Stock

Tool Buddy Sport Deluxe TBSDX-BL with Stainless Cup Holder (tools shown are not included)

Tood Buddy Sport Deluxe with Stainless Cup Holder (tools shown are not included)
Item # TBSDX-BL BLACK @ $54.95

Description
* Back Plate 1/4” thick x 8-8-7/8″ Wide x 8-5/8” High with two mounting holes
* Shelf (tool holder) 8-5/8” Long x 2-1/2” Wide x 3/8 Thick and 3-5/8” Wide at cup holder
* Cup holder opening 2-11/16 diameter
* One ¼” hole for diamond file, Six 1/8” holes for hanging lures & Four tool openings
* One 2-1/8 x 5/16 for measuring board, One 2-1/8 x 11/16, Two 1-15/16 x ½

$54.95

Add to cart
In Stock

Tool Buddy Sport TBS-BL without Cup Holder (tools shown are not included)

Tood Buddy Sport without cupholder (tools shown are not included)
Item # TBS-BL BLACK @ $39.95

Description
* Back Plate 1/4” thick x 5-1/2″ Wide x 8-5/8” High with two mounting holes
* Shelf (tool holder) 5-1/4” Long x 2-1/2” Wide x 3/8 Thick
* One ¼” hole for diamond file, Six 1/8” holes for hanging lures & Four tool openings
* One 2-1/8 x 5/16 for measuring board, One 2-1/8 x 11/16, Two 1-15/16 x ½

$39.95

Add to cart
In Stock

TS-DSI fits Lowrance DSI xDucer 000-10260-001 for Trolling Motor or Jack Plate install

Fits Lowrance Down Scan Skimmer transducer # 10260-001
not for use directly on transom. Please see additional accessories.
(Transducer is not included)

$69.95

Select options
In Stock

TS-HDI-3 fits Lowrance HDI xDucer (50/200kHz) 000-10977-001 for Trolling Motor or Jack Plate install

Fits Lowrance® Elite HDI (Hybrid Dual Imaging) Skimmer transducer # 000-10977-001 (50/200kHz)

$89.95

Select options
In Stock

TS-HDI-4 fits Lowrance HDI (83/200kHz) Transducer # 000-10976-001, # 000-12728-001 & # 000-12570-001

Fits Lowrance® HDI (Hybrid Dual Imaging) 83/200kHz Skimmer transducer # 000-10976-001. # 000-12728-001 & # 000-12570-001. It can be attached to a trolling motor, to the side of a Jack Plate with an L Bracket, or on a hole shot plate (under the jack plate) with a Wedge

$89.95

Select options
In Stock

TS-LIVE-S to attach Lowrance LiveSight xDucer # 000-14458-001 on Jack Plate, Hole Shot or Transom Set Back

This item is presently on Back Order. Estimated Ship Date September 7th. If you an order is placed, it will be held on back order and shipped as soon as it becomes available. Thank you for your patience.

TS-LIVE-S to attach a Lowrance® LiveSight™ transducer # 000-14458-001 on a Jack Plate, Hole Shot Plate or Set Back.

It is very important to complete the questionnaire below in full when ordering this item.

$199.95

Select options
In Stock

TS-LSS-1 to fit Lowrance LSS1 Structure Scan xDucer on a Jack Plate & some Trolling Motors

This Transducer Shield® can be installed on a Trolling Motor that has a Built In Sonar in the cone, OR on a Jack Plate, Hole Shot Plate or Set Back. Additional components will be required.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
It is Very Important that you complete the questionnaire when ordering this item.

$149.00

Select options
In Stock

TS-LSS-2 fits Lowrance LSS1 Structure Scan xDucer on a Set Back or Hole Shot Plate

Fits Lowrance® LSS1 Structure Scan Transducer for Set Back or Hole Shot Plate Application.
See TS-LSS2-L to fit the new LSS2 (10″)transducer

$79.95

Select options
In Stock

TS-LSS-3D fits Lowrance LSS1 Structure Scan & Pod xDucers together usually on a Trolling Motor

Fits Lowrance® LSS1 (6″) Structure Scan Transducer with the Lowrance® Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$185.00

Select options
Out Of Stock

TS-LSS-3D-AM to fit Lowrance LSS1 and Airmar TM150 pod transducer

Fits Lowrance® LSS1 (6″) Structure Scan Transducer with an Airmar® (TM150M) Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$185.00

Select options
In Stock

TS-LSS2-2L fits Lowrance LSS2 Structure Scan Transducer on a Set Back or Hole Shot Plate

Fits Lowrance LSS2 structure scan 10-1/4″ transducer for installation on SetBack/Step OR Hole Shot/Baffle plates.
NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
It is very important that you complete the questionnaire when ordering this item.

$99.95

Select options
In Stock

TS-LSS2-3D fits Lowrance LSS2 Structure Scan & Pod xDucer together usually on a Trolling Motor

^{Transducer Shield to fit Lowrance LSS2 (10-1/4″) structure scan transducer and pod transducer in tandem on trolling motors. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$224.95

Select options
In Stock

TS-LSS2-3D-AM to fit Lowrance LSS2 structure scan and Airmar TM150 pod transducer

Fits Lowrance® LSS2 (10-1/4″) Structure Scan Transducer with an Airmar® (TM150M) Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$224.95

Select options
In Stock

TS-LSS2-L fits Lowrance LSS2 Structure Scan Transducer on a Jack Plate

_{Easily attaches a Lowrance® LSS2 structure scan transducer, with ADDITIONAL components to your Jack Plate or Boat Set Back.}

_{^NOTE^{: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}}

_{It is VERY IMPORTANT that you complete the questionnaire when ordering this item.}

$169.00

Select options
In Stock

TSS-RM-3D fits Raymarine® RealVision 3D RV100 transducer # A80464
$275.00

Select options
In Stock

WC 2.5″ x 2.75″ x 0.5″ cable management cover

^Black^{polyethylene marine board and is 2-1/2″ x 2-3/4″ x 1/2″ thick and includes stainless steel screws..}

$19.95

Add to cart
In Stock

WG-1 Wedge to attach a Transducer Shield to a Set Back or Hole Shot Plate

WG-1 Wedge along with a Transducer Shield will put the Transducer at the correct angle when the boat is in the water when installed on a Boat Set Back or Jack Plate hole shot/baffle plate

$14.95

Select options
In Stock

WG-3.5 Wedge used to attach TM-HX-1 Transducer Shield to a 90 degree Hole Shot Plate

WG-2.5 Wedge to attach Transducer Shield to 90 degree hole shot plate.

Used along with a Transducer Shield on 90 Degree Jack Plate with Hole Shot Plate. This wedge is suitable for our Humminbird® Transducer Shield # TM-HX-1

$48.95

Select options
In Stock

WG-LSS2 to fit Humminbird TM-HX-3, TM-H8.3 or Garmin TG-HG-8.5 Transducer Shield on Set Back or Hole Shot Plate (10-12″ jack plates only)

Wedge used when attaching a Humminbird® TM-HX-3 or TM-H8.3 Transducer Shield on a boat Set-Back OR on a Hole Shot Plate under a jack plate. This Wedge CANNOT be used on a 90 ° degree Jack Plate.

$47.00

Select options
In Stock

WG-LSS2 to fit Lowrance LSS2, Total Scan, 3-on-1, 2-in-1, Structure Scan 3D Humminbird TM-HX-3 or TM-H8.3 on Set Back or Hole Shot Plate (10-12″ jack plates only)

^{This wedge is used when attaching a Lowrance 10-1/4″ transducer with a Transducer Shield to the Set Back of a Boat – example some Ranger Boats have a good set back.}

$47.00

Select options
In Stock

SBB-HDSI-Combo to attach Humminbird HDSI xDucer XHS 9 HDSI 180 T & Shield on a Transom

Spring Back Bracket and Transducer Shield TM-HDsi combination for transom installation. Ideal for boats with flat transoms or for boats without a jack plate.

$194.95

Select options
In Stock

BLOCK-HDSI for Humminbird Side Image xDucer XHS 9 HDSI 180 T on a Spring Back Bracket for install on a Transom

Block-HDSI will help to prevent the factory bracket from pivoting upward on the transducer-arm when struck by an underwater object. The block is designed specifically for HDSI XHS-HDSI-9-180 T Transducer only.

$9.95

Select options
In Stock

BLOCK-LSS1-2 for Lowrance Structure Scan bracket attached to SBB-4

Block-LSS1-2 will help to prevent the factory bracket from loosening and pivoting upward when struck by an underwater object. The block is designed to fit the original Lowrance factory bracket. Click on the link BELOW to identify your factory bracket. Lowrance LSS1 or LSS2 factory bracket difference

$18.95

Select options

CLOSE

My Account
Search

Search for:
1