wedge – Transducer Shield and Saver

Showing all 26 results

In Stock

“The Wedge” – Trolling Motor Shallow Water Bracket

Let’s Fish Shallow with “The Wedge”. No more holding the trolling motor rope to fish shallow.
Simply place “The Wedge” beneath the trolling motor bracket and GO SHALLOW.
Available to fit Garmin Force, Lowrance Ghost, Minnkota Ultrex and Fortrex or Motorguide Pro Tour.

Price range: $114.95 through $134.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

TS-DSS3-TS to fit Lowrance®Total Scan, Structure Scan 3D and HDS Live xDucer 2-in-1 or 3-in-1 on Jack Plate, Hole Shot or Transom Set Back

Choose this item for Jack Plate, Hole Shot Plate or Set Back installation to attach a Lowrance®/Simrad® Total Scan transducer # 000-12568-001 or Lowrance®/Simrad® Structure Scan 3D transducer # 000-12396-001 on a Jack Plate or Transom Set Back. This Transducer Shield will also fit the New Lowrance HDS LIVE Active Imaging 2-in-1 transducer # 000-14490-001 and 3-in-1 transducer # 000-14489-001. NOTE: this item DOES NOT fit the ActiveImageing HD 3-in-1 Transducer # 000-16062-001 or ActiveImaging HD 3-in-1 FishReveal Transducer # 000-1060-001.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

For trolling motor installation go to TS-DSS3-TS-COMBO.
It is VERY IMPORTANT that you complete the questionnaire when ordering this product.

$189.00

Select options
In Stock

TS-TRI-SH to fit Lowrance Hook 2 / Reveal Triple Shot Transducer # 000-14029-001 on Jack Plate, Hole Shot Plate or Set Back

^{Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 for Jack Plate, Hole Shot Plate or Transom Set Back. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001}
^{NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}

$189.00

Select options
In Stock

TS-TRI-SH combo to fit Lowrance Hook 2 / Reveal Triple Shot xDucer 000-14029-001 on Trolling Motor

_{Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Trolling Motor. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot Transducer # 000-16285-001}

$215.95

Select options
In Stock

TS-SP-SH to fit Lowrance® Hook2 Split Shot transducer 000-14028-001 & Eagle Splitshot HD 000-16284-001.

Fits Lowrance® Hook² Split Shot transducer 000-14028-001 It can be attached to a trolling motor, to the side of a Jack Plate with an L Bracket, or on a hole shot plate (under the jack plate) with a Wedge. This Transducer Shield will NOT fit the latest Lowrance Split Shot transducer # 000-16284-001

$89.95

Select options
In Stock

ATLAS 8″ to 12″ Jack Plate – R3 (w/ offset) – for STARBOARD or DRIVER side

L Bracket with 3 inch offset to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ or 12″ Jack Plate. Also available for the Port Side. It is very important that you complete the questionnaire when ordering this item.you

$79.95

Select options
In Stock

ATLAS 8″ to 12″ Jack Plate – L3 (w/ offset)- PORT or PASSENGER SIDE

L Bracket with 3 inch offset to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ or 12″ Jack Plate. Also available for the Port Side. It is very important that you complete the questionnaire when ordering this item.you

$79.95

Select options
In Stock

Atlas 4″ Jack Plate – L Bracket # LB-AT-4-Combo (with solid spacer)

L Bracket – Combo with Solid Spacer to attach a Transducer Shield to the side of an Atlas Hydraulic 4” Jack Plate.

It is very important that you complete the questionnaire when ordering this item.
The information you provide will help us to assist you better and avoid a delay in shipping your order.

$96.95

Select options
In Stock

ATLAS 8″ to 14″ Jack Plate : L Bracket # LB-AT-4.6.8.10.12 (without offset)

L Bracket to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ and 12″ Jack Plate. PLEASE make sure that your jack plate size and Transducer Shield is listed in the description to the left. The larger transducers require our L Bracket with an “offset” or “spacer” to keep the trim rod from hitting the transducer.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

$49.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

EXT-2.O” Extension

An extension between an L Bracket & Transducer Shield to lower the transducer so as to avoid side viewing signal interference with hull turning chines.

$35.00

Add to cart
In Stock

EXT-3.0 Extension

Aluminum extension attached between an L Bracket and Transducer Shield will lower the transducer if turning chines or trim tabs interfere with transducer side signal

$40.00

Add to cart
In Stock

LB-AT-4.6.8.10.12 to attach a Transducer Shield to ATLAS 8″ to 12″ jack plates

L Adaptor Bracket used to install a Transducer Shield to the side of an Atlas 8″, 10″ & 12″ Hydraulic Jack Plates

$49.95

Select options
In Stock

LB-SS-4-L to attach a Transducer Shield to Sea Star 4″ jack plate

L Adaptor Bracket used to install a Transducer Shield to the side of an Sea Star 4″ Hydraulic Jack Plate

$59.95

Select options
In Stock

LB-SS-4-R to attach a Transducer Shield to Sea Star 4″ jack plate

L Adaptor Bracket used to install a Transducer Shield to the side of an Sea Star 4″ Hydraulic Jack Plate

$59.95

Select options
In Stock

LB-SS-6-8-10-12-L to attach a Transducer Shield to Sea Star 6, 8, 10, 12″ jack plate

L Adaptor Bracket used to install a Transducer Shield to the side of an Sea Star 6″, 8″, 10″ or 12″ Hydraulic Jack Plate

$59.95

Select options
In Stock

LB-SS-6-8-10-12-R to attach a Transducer Shield to Sea Star 6, 8, 10, 12″ jack plate

L Adaptor Bracket used to install a Transducer Shield to the side of an Sea Star 6″, 8″, 10″ or 12″ Hydraulic Jack Plate

$59.95

Select options
In Stock

LB-CMC-5/5-8 to fit 5.5 to 8″ CMC Jack Plate

L Bracket to attach a Transducer Shield to the side of a CMC jack plate.

It is very important that you complete the questionnaire when ordering this item.
The information you provide will help us to assist you better and avoid a delay in shipping your order.

$64.95

Select options
In Stock

TS-HDI-3 fits Lowrance HDI xDucer (50/200kHz) 000-10977-001 for Trolling Motor or Jack Plate install

Fits Lowrance® Elite HDI (Hybrid Dual Imaging) Skimmer transducer # 000-10977-001 (50/200kHz)

$89.95

Select options
In Stock

TS-HDI-4 fits Lowrance HDI (83/200kHz) Transducer # 000-10976-001, # 000-12728-001 & # 000-12570-001

Fits Lowrance® HDI (Hybrid Dual Imaging) 83/200kHz Skimmer transducer # 000-10976-001. # 000-12728-001 & # 000-12570-001. It can be attached to a trolling motor, to the side of a Jack Plate with an L Bracket, or on a hole shot plate (under the jack plate) with a Wedge

$89.95

Select options
In Stock

TS-LSS-3D fits Lowrance LSS1 Structure Scan & Pod xDucers together usually on a Trolling Motor

Fits Lowrance® LSS1 (6″) Structure Scan Transducer with the Lowrance® Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$185.00

Select options
Out Of Stock

TS-LSS-3D-AM to fit Lowrance LSS1 and Airmar TM150 pod transducer

Fits Lowrance® LSS1 (6″) Structure Scan Transducer with an Airmar® (TM150M) Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$185.00

Select options
In Stock

TS-LSS2-3D-AM to fit Lowrance LSS2 structure scan and Airmar TM150 pod transducer

Fits Lowrance® LSS2 (10-1/4″) Structure Scan Transducer with an Airmar® (TM150M) Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$224.95

Select options
In Stock

TS-LSS2-L fits Lowrance LSS2 Structure Scan Transducer on a Jack Plate

_{Easily attaches a Lowrance® LSS2 structure scan transducer, with ADDITIONAL components to your Jack Plate or Boat Set Back.}

_{^NOTE^{: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}}

_{It is VERY IMPORTANT that you complete the questionnaire when ordering this item.}

$169.00

Select options
In Stock

WG-3.5 Wedge used to attach TM-HX-1 Transducer Shield to a 90 degree Hole Shot Plate

WG-2.5 Wedge to attach Transducer Shield to 90 degree hole shot plate.

Used along with a Transducer Shield on 90 Degree Jack Plate with Hole Shot Plate. This wedge is suitable for our Humminbird® Transducer Shield # TM-HX-1

$48.95

Select options
In Stock

WG-LSS2 to fit Humminbird TM-HX-3, TM-H8.3 or Garmin TG-HG-8.5 Transducer Shield on Set Back or Hole Shot Plate (10-12″ jack plates only)

Wedge used when attaching a Humminbird® TM-HX-3 or TM-H8.3 Transducer Shield on a boat Set-Back OR on a Hole Shot Plate under a jack plate. This Wedge CANNOT be used on a 90 ° degree Jack Plate.

$47.00

Select options
In Stock

WG-LSS2 to fit Lowrance LSS2, Total Scan, 3-on-1, 2-in-1, Structure Scan 3D Humminbird TM-HX-3 or TM-H8.3 on Set Back or Hole Shot Plate (10-12″ jack plates only)

^{This wedge is used when attaching a Lowrance 10-1/4″ transducer with a Transducer Shield to the Set Back of a Boat – example some Ranger Boats have a good set back.}

$47.00

Select options

CLOSE

My Account
Search

Search for:
0