Showing 1–30 of 84 results
-
AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom
$49.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.
-
AP-D-Vu to fit Garmin DownVü Transducer GT20 on a Transom
$69.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
AP-DI to fit a Humminbird Down Image xDucer XNT 9 DI T on a Transom
$49.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.
-
AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom
$49.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
AP-DS-8.4 to fit Garmin DownVü/SideVü (with Chirp) Transducer GT36, GT40 or GT56 on a Transom
$89.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
AP-DS-9 to fit Garmin DownVü/SideVü (with Chirp) Transducer GT41, GT50 & GT51 on a Transom
$79.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
AP-DS-Vu to fit Garmin DownVü/SideVü Transducer GT30 and GT34 on a Transom
$69.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
AP-DSi to fit Lowrance DSI xDucer 000-10260-001 on a Transom
$49.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boat without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.
-
AP-GAR-2 to Fit Garmin Dual Beam transducer
$74.95Armor Plate AP-GAR-2 to fit Garmin Dual Beam transducer. Enlarge the pictures to identify your transducer. Please answer all questions in the questionnaire.
-
AP-GT-6 to fit Garmin® GT 22, GT 24, GT 52 or GT 54 transducer on a Transom
$69.95For transom installation to protect your transducer from side to side and front to back impact.
Ideal for boats with flat transoms or for boats without a jack plate.
Recommended as an added accessory to our SBB-5 Spring Back Bracket.
It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.
-
AP-H-7.1 to fit Humminbird Helix Mega DI + Dual Spectrum Chirp Transducer # XM 9 HW MDI T on a Transom
$84.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.
-
AP-H-8.3 to fit Humminbird Helix Mega G3N SI+DI Transducer # XM 9 HW MSI T or Solix G2N SI+DI Transducer # XM 14 HW MSI T on a Transom
$89.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
AP-HDI-2 to fit Lowrance HDI (83/200kHz) 000-10976-001 xDucer on a Transom
$59.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
AP-HDI-3 to fit Lowrance HDI (50/200kHz) 000-10977-001 xDucer on a Transom
$74.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket # SBB-5. Please complete the questionnaire below when ordering this product.
-
AP-HUM-2 to fit Humminbird xDucer XNT 9 20 T & XNT 14 20 T on a Transom
$49.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms or for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.
-
AP-HX-1 to fit Humminbird Mega SI or Solix SI Transducer on a Transom
$89.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. This particular Armor Plate is available in a 90° bend. If you are planning to install the Armor Plate on a 90° surface, please let us know in the “check out order” note box.
-
TS-AIHD-TS fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001.on Jack Plate or Transom Set Back
$199.00Item # TS-AIHD-TS is designed to fit Lowrance® ActiveImaging HD™ 3-in-1 Transducer # 000-16062-001 (approx. 10-1/4” long x 2” wide x 1-1/4” thick and the cable comes out from the back).
It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.
-
TS-AIHD-TS Combo fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001 on a trolling motor
$225.95Item # TS-AIHD-TS Combo is built in High Quality Aluminum Alloy and Black Powder Coated for Trolling Motor installation. It is designed to fit Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ transducer # 000-16060-001. The transducer is approx. 10-1/4” long x 2” wide x 1-1/2″ thick and the cable comes out on top near the back.
It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.
-
TS-DSS3-TS to fit Lowrance®Total Scan, Structure Scan 3D and HDS Live xDucer 2-in-1 or 3-in-1 on Jack Plate, Hole Shot or Transom Set Back
$189.00Choose this item for Jack Plate, Hole Shot Plate or Set Back installation to attach a Lowrance®/Simrad® Total Scan transducer # 000-12568-001 or Lowrance®/Simrad® Structure Scan 3D transducer # 000-12396-001 on a Jack Plate or Transom Set Back. This Transducer Shield will also fit the New Lowrance HDS LIVE Active Imaging 2-in-1 transducer # 000-14490-001 and 3-in-1 transducer # 000-14489-001. NOTE: this item DOES NOT fit the ActiveImageing HD 3-in-1 Transducer # 000-16062-001 or ActiveImaging HD 3-in-1 FishReveal Transducer # 000-1060-001.
NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
For trolling motor installation go to TS-DSS3-TS-COMBO.
It is VERY IMPORTANT that you complete the questionnaire when ordering this product. -
TS-DSS3-TS Combo fits Lowrance® Total Scan & Live Active Imaging 2-in-1 or 3-in-1 xDucer on a Trolling Motor
$215.95Choose this item to attach a Lowrance® Total Scan transducer # 000-12568-001 on a Trolling Motor. This Transducer Shield will fit the Lowrance Live Active Imaging transducer # 000-14490-001 or 3-IN-1 transducer # 000-14489-001 NOTE: this item DOES NOT fit the ActiveImage HD 3-in-1 # 000-16062-001 or the ActiveImage HD 3-in-1 FishReveal Transducer # 000-16060-001 It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.
-
TS-TRI-SH to fit Lowrance Hook 2 / Reveal Triple Shot Transducer # 000-14029-001 on Jack Plate, Hole Shot Plate or Set Back
$189.00Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 for Jack Plate, Hole Shot Plate or Transom Set Back. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001
NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required. -
TS-TRI-SH combo to fit Lowrance Hook 2 / Reveal Triple Shot xDucer 000-14029-001 on Trolling Motor
$215.95Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Trolling Motor. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot Transducer # 000-16285-001
-
TS-SP-SH to fit Lowrance® Hook2 Split Shot transducer 000-14028-001.
$89.95Fits Lowrance® Hook² Split Shot transducer 000-14028-001 It can be attached to a trolling motor, to the side of a Jack Plate with an L Bracket, or on a hole shot plate (under the jack plate) with a Wedge. This Transducer Shield will NOT fit the latest Lowrance Split Shot transducer # 000-16284-001
-
AP-LIVE-S to attach Lowrance LiveSight Transducer # 000-14458-001 on a trolling motor shaft
$199.95AP-LIVE-S when attached to a trolling motor shaft, the angle of the transducer can be adjusted and “Positive Locked”. Fits Lowrance® LiveSight™ transducer # 000-14458-001
-
AP-LOW to fit Lowrance Skimmer xDucer 106-72 on a Transom
$49.95For transom installation to protect your transducer from side to side and front and back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.
-
AP-ONIX-HDSI to fit Humminbird Onix xDucer XT 14 20 HDSI T or XT 14 20 HDSI T (RD) on a Transom
$84.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket
-
AP-SP-SH Armor Plate to fit Lowrance® Hook 2 Split Shot Transducer
$79.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. This Armor Plate will NOT fit the latest Lowrance Split Shot transducer # 000-16284-001
It is very important that you complete the questionnaire in full when ordering any of our products. -
AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom
$94.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. This Armor Plate will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001
It is very important that you complete the questionnaire in full when ordering any of our products. -
AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom
$79.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate.
This particular Armor Plate is also available in a 90° bend. If you are plan to install the Armor Plate on a 90° surface, please let us know in the comment area at check out
Recommended as an added accessory to our SBB-5 Spring Back Bracket.
It is very important that you complete the questionnaire in full when ordering any of our products. The information you provide will help us to assist you better and avoid a delay in shipping your order. -
Armor Plate # AP-AI-HD to fit Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001
$79.95This particular Armor Plate is available in a 90° bend. If you are planning on installing the Armor Plate on a 90° surface, please let us know in the “check out order” note box.
It is very important that you complete the questionnaire in full when ordering any of our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.
