fish finder – Transducer Shield and Saver

Showing 1–30 of 54 results

In Stock

“The Wedge” – Trolling Motor Shallow Water Bracket

Let’s Fish Shallow with “The Wedge”. No more holding the trolling motor rope to fish shallow.
Simply place “The Wedge” beneath the trolling motor bracket and GO SHALLOW.
Available to fit Garmin Force, Lowrance Ghost, Minnkota Ultrex and Fortrex or Motorguide Pro Tour.

Price range: $114.95 through $134.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

$49.95

Select options
In Stock

AP-D-Vu to fit Garmin GT20

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$69.95

Select options
In Stock

AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$49.95

Select options
In Stock

AP-DS-Vu to fit Garmin GT30 and GT34

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$69.95

Select options
In Stock

AP-AI-HD to fit Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001
$79.95

Select options
In Stock

AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom

^{For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate.}
^{Recommended as an added accessory to our SBB-5 Spring Back Bracket.}

$79.95

Select options
In Stock

AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. This Armor Plate will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001
It is very important that you complete the questionnaire in full when ordering any of our products.

$94.95

Select options
In Stock

AP-DSi to fit Lowrance DSI xDucer 000-10260-001 on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boat without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

AP-GAR-2 to Fit Garmin Dual Beam transducer

Armor Plate AP-GAR-2 to fit Garmin Dual Beam transducer. Enlarge the pictures to identify your transducer. Please answer all questions in the questionnaire.

$74.95

Select options
In Stock

AP-GT-6 to fit Garmin GT 22, GT 24, GT 52 or GT 54

For transom installation to protect your transducer from side to side and front to back impact.

Ideal for boats with flat transoms or for boats without a jack plate.

Recommended as an added accessory to our SBB-5 Spring Back Bracket.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

$69.95

Select options
In Stock

AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

$89.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-HDI-2 to fit Lowrance HDI (83/200kHz) 000-10976-001 xDucer on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$59.95

Select options
In Stock

AP-HDI-3 to fit Lowrance HDI (50/200kHz) 000-10977-001 xDucer on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket # SBB-5. Please complete the questionnaire below when ordering this product.

$74.95

Select options
In Stock

AP-HUM-2 to fit Humminbird xDucer XNT 9 HW T, XNT 9 20 T & XNT 14 20 T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms or for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

AP-HX-1 to fit Humminbird Mega SI or Solix SI Transducer on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

$89.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

TS-AIHD-TS Combo fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001 on a trolling motor

^{Item # TS-AIHD-TS Combo}^{is built in High Quality Aluminum Alloy and Black Powder Coated for Trolling Motor installation. It is designed to fit Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ transducer # 000-16060-001. The transducer is approx. 10-1/4” long x 2” wide x 1-1/2″ thick and the cable comes out on top near the back.}

^{It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$225.95

Select options
In Stock

TS-DSS3-TS to fit Lowrance®Total Scan, Structure Scan 3D and HDS Live xDucer 2-in-1 or 3-in-1 on Jack Plate, Hole Shot or Transom Set Back

Choose this item for Jack Plate, Hole Shot Plate or Set Back installation to attach a Lowrance®/Simrad® Total Scan transducer # 000-12568-001 or Lowrance®/Simrad® Structure Scan 3D transducer # 000-12396-001 on a Jack Plate or Transom Set Back. This Transducer Shield will also fit the New Lowrance HDS LIVE Active Imaging 2-in-1 transducer # 000-14490-001 and 3-in-1 transducer # 000-14489-001. NOTE: this item DOES NOT fit the ActiveImageing HD 3-in-1 Transducer # 000-16062-001 or ActiveImaging HD 3-in-1 FishReveal Transducer # 000-1060-001.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

For trolling motor installation go to TS-DSS3-TS-COMBO.
It is VERY IMPORTANT that you complete the questionnaire when ordering this product.

$189.00

Select options
In Stock

TS-DSS3-TS Combo fits Lowrance® Total Scan & Live Active Imaging 2-in-1 or 3-in-1 xDucer on a Trolling Motor

Choose this item to attach a Lowrance® Total Scan transducer # 000-12568-001 on a Trolling Motor. This Transducer Shield will fit the Lowrance Live Active Imaging transducer # 000-14490-001 or 3-IN-1 transducer # 000-14489-001 NOTE: this item DOES NOT fit the ActiveImage HD 3-in-1 # 000-16062-001 or the ActiveImage HD 3-in-1 FishReveal Transducer # 000-16060-001 It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

$215.95

Select options
In Stock

TS-TRI-SH to fit Lowrance Hook 2 / Reveal Triple Shot Transducer # 000-14029-001 on Jack Plate, Hole Shot Plate or Set Back

^{Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 for Jack Plate, Hole Shot Plate or Transom Set Back. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001}
^{NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}

$189.00

Select options
In Stock

TS-TRI-SH combo to fit Lowrance Hook 2 / Reveal Triple Shot xDucer 000-14029-001 on Trolling Motor

_{Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Trolling Motor. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot Transducer # 000-16285-001}

$215.95

Select options
In Stock

TS-SP-SH to fit Lowrance® Hook2 Split Shot transducer 000-14028-001 & Eagle Splitshot HD 000-16284-001.

Fits Lowrance® Hook² Split Shot transducer 000-14028-001 It can be attached to a trolling motor, to the side of a Jack Plate with an L Bracket, or on a hole shot plate (under the jack plate) with a Wedge. This Transducer Shield will NOT fit the latest Lowrance Split Shot transducer # 000-16284-001

$89.95

Select options
In Stock

AP-LIVE-S to attach Lowrance LiveSight Transducer # 000-14458-001 on a trolling motor shaft

^{AP-LIVE-S when attached to a trolling motor shaft, the angle of the transducer can be adjusted and “Positive Locked”. Fits Lowrance® LiveSight™ transducer # 000-14458-001}

$199.95

Select options
In Stock

AP-LOW to fit Lowrance Skimmer xDucer 106-72 on a Transom

For transom installation to protect your transducer from side to side and front and back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

AP-ONIX-HDSI to fit Humminbird Onix xDucer XT 14 20 HDSI T or XT 14 20 HDSI T (RD) on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket

$84.95

Select options
In Stock

ATLAS 8″ to 12″ Jack Plate – R3 (w/ offset) – for STARBOARD or DRIVER side

L Bracket with 3 inch offset to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ or 12″ Jack Plate. Also available for the Port Side. It is very important that you complete the questionnaire when ordering this item.you

$79.95

Select options
In Stock

ATLAS 8″ to 12″ Jack Plate – L3 (w/ offset)- PORT or PASSENGER SIDE

L Bracket with 3 inch offset to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ or 12″ Jack Plate. Also available for the Port Side. It is very important that you complete the questionnaire when ordering this item.you

$79.95

Select options
In Stock

Atlas 4″ Jack Plate – L Bracket # LB-AT-4-Combo (with solid spacer)

L Bracket – Combo with Solid Spacer to attach a Transducer Shield to the side of an Atlas Hydraulic 4” Jack Plate.

It is very important that you complete the questionnaire when ordering this item.
The information you provide will help us to assist you better and avoid a delay in shipping your order.

$96.95

Select options
In Stock

ATLAS 8″ to 14″ Jack Plate : L Bracket # LB-AT-4.6.8.10.12 (without offset)

L Bracket to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ and 12″ Jack Plate. PLEASE make sure that your jack plate size and Transducer Shield is listed in the description to the left. The larger transducers require our L Bracket with an “offset” or “spacer” to keep the trim rod from hitting the transducer.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

$49.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

6/8/10 inch BOB’S Machine Jack Plate – for STARBOARD side

LB-BM-6.8.10 Fits 6″, 8″ & 10″ Bob’s Hydraulic Jack Plates. Used to attach a Transducer Shield to the side of the jack plate.

It is very important that you complete the questionnaire when ordering this product. The information that you provide will help us to assist you better and avoid a delay in shipping your order. The more information that we have about your boat and jack plate, the better we can assist you.

Contact us if you need further assistance.

$59.95

Select options

CLOSE

My Account
Search

Search for:
0