Showing 1–30 of 34 results

  • "The Wedge" - Trolling Motor Shallow Water Bracket
    In Stock

    “The Wedge” – Trolling Motor Shallow Water Bracket

    Let’s Fish Shallow with “The Wedge”.  No more holding the trolling motor rope to fish shallow.
    Simply place “The Wedge” beneath the trolling motor bracket and GO SHALLOW.
    Available to fit Garmin Force, Lowrance Ghost, Minnkota Ultrex and Fortrex or Motorguide Pro Tour.

    $114.95 – $134.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • 360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex
    Picture shows 360 Stabilizer attached to the shaft of a Humminbird 360
    In Stock

    360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex

    Item # 360 Stabilizer to stabilize the Humminbird® 360 Imaging on a Minnkota® Ultrex trolling motor.  It is built in 5/16 aluminum alloy and black powder coated.  The total length is 15-1/2″ and attaches to the existing Humminbird® 360 Imaging bracket on a Minnkota® Ultrex Trolling Motor.

    The purpose of our 360 Stabilizer is to:  (1)  reduce vibration of the Humminbird® 360 when the boat is up on plane and going through rough conditions  (2) reduce the chance of breaking the Humminbird® 360 shaft when the transducer comes in contact with underwater obstruction  (3) adds support to the Humminbird® 360 shaft and reduces flexing  (4) reduces vibration to the 360 transducer when the trolling motor is deployed in the water and in trolling mode, and  (5) enhances the structure definition on the fish finder.

    Simple installation:  attach our 360 Stabilizer base bracket to the existing holes in the Humminbird® 360 mounting bracket and clamp the end of the 360 Stabilizer to the Humminbird® 360 shaft.

    $149.00
    Select options
  • 360 Humminbird - Without a bracket to Ultrex # 360-F-CAB-ULT
    360-F-CAB-ULT
    In Stock

    360 Humminbird – Without a bracket to Ultrex # 360-F-CAB-ULT

    360-F-CAB-ULT :  Conversion Adapter Bracket will allow you to fit a Humminbird 360 without a bracket or a removable universal bracket to a Minnkota Ultrex trolling motor.

    $399.00
    Select options
  • AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom
    AP-CSi Armor Plate
    In Stock

    AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $49.95
    Select options
  • AP-DI to fit a Humminbird Down Image xDucer XNT 9 DI T on a Transom
    AP-DI Armor Plate
    In Stock

    AP-DI to fit a Humminbird Down Image xDucer XNT 9 DI T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-4 Spring Back Bracket.

    $49.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom
    AP-DI-2
    In Stock

    AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $49.95
    Select options
  • AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T
    Armor Plate AP-H-8.3 to fit Humminbird Mega SI Transducer
    In Stock

    AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T

    For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $89.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • AP-HUM-2 to fit Humminbird xDucer XNT 9 HW T, XNT 9 20 T & XNT 14 20 T on a Transom
    AP-HUM Armor Plate
    In Stock

    AP-HUM-2 to fit Humminbird xDucer XNT 9 HW T, XNT 9 20 T & XNT 14 20 T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms or for boats without a jack plate.  Recommended as an added accessory to our SBB-4 Spring Back Bracket.

    $49.95
    Select options
  • AP-HX-1 to fit Humminbird Mega SI or Solix SI Transducer on a Transom
    In Stock

    AP-HX-1 to fit Humminbird Mega SI or Solix SI Transducer on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $89.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • AP-ONIX-HDSI to fit Humminbird Onix xDucer XT 14 20 HDSI T or XT 14 20 HDSI T (RD) on a Transom
    AP-ONIX-HDSI
    In Stock

    AP-ONIX-HDSI to fit Humminbird Onix xDucer XT 14 20 HDSI T or XT 14 20 HDSI T (RD) on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-4 Spring Back Bracket

    $84.95
    Select options
  • 6/8/10 inch BOB'S Machine Jack Plate - for STARBOARD side
    Bob's L Bracket
    In Stock

    6/8/10 inch BOB’S Machine Jack Plate – for STARBOARD side

    LB-BM-6.8.10   Fits 6″, 8″ & 10″ Bob’s Hydraulic Jack Plates. Used to attach a Transducer Shield to the side of the jack plate.

    It is very important that you complete the questionnaire when ordering this product.  The information that you provide will help us to assist you better and avoid a delay in shipping your order.  The more information that we have about your boat and jack plate, the better we can assist you.

    Contact us if you need further assistance.

    $59.95
    Select options
  • EXT-2.O" Extension
    EXT-2.O" Extension
    In Stock

    EXT-2.O” Extension

    An extension between an L Bracket & Transducer Shield to lower the transducer so as to avoid side viewing signal interference with hull turning chines.

    $35.00
    Add to cart
  • EXT-3.0 Extension
    Picture shows an L Bracket + Extension + Transducer Shield
    In Stock

    EXT-3.0 Extension

    Aluminum extension attached between an L Bracket and Transducer Shield will lower the transducer if turning chines or trim tabs interfere with transducer side signal

    $40.00
    Add to cart
  • TM-H8.3 fits Humminbird Mega MSI Transducer
    Transducer Shield TM-H8.3 components
    In Stock

    TM-H8.3 fits Humminbird® Solix or Helix Mega G2N, G3N or G4N Mega MSI T Transducer

    TM-H-8.3 fits Humminbird® Solix Mega Si GPS G2N, G3N transducer XM 14 HW MSI T or Helix Mega Si GPS G3N or G4N transducer XM 9 HW MSI T,  XTM 9 HW MSI T or XM 14 HW MSI T.   If this item is going on a Trolling Motor, please answer the trolling motor questions.  If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.

    NOTE:  A transducer attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, will not track the bottom when the boat is up on plane.  An in hull transducer will be required or recommended to track the bottom when the boat is up on plane.

    $179.00
    Select options
  • TM-H7.1 fits Humminbird® Solix Mega G2N or G3N DiTransducer XM 14 HW MDI T or Helix Mega G3N or G4N Di Transducer XM 9 HW MDI T
    TM-H7.1 picture shows Transducer Shield Rail and Block
    In Stock

    TM-H7.1 fits Humminbird® Solix Mega G2N or G3N DiTransducer XM 14 HW MDI T or Helix Mega G3N or G4N Di Transducer XM 9 HW MDI T

    TM-H-7.1 fits Humminbird® SOLIX Mega Di GPS G2N transducer XM 14 HW MDI T or XTM 14 HW MDI T or Helix Mega Di GPS G3N transducer XM 9 HW MDI T or XTM 9 HW MDI T for trolling motor, set back, hole shot plate or jack plate installation.  If this item is going on a Trolling Motor, please answer the trolling motor questions.  If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.  It is very important that you answer the questionnaire in full please.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $179.00
    Select options
  • ACC-TL
    In Stock

    Humminbird Target Lock Accessory Bracket Item # ACC-TL

    Item # ACC-TL “Accessory Target Lock” is built in 6061 aircraft aluminum and black powder coated.
    This item would be used in conjunction with our Receiver Ring system to attach a Humminbird® Target Lock to a Garmin®Force, Lowrance® Ghost or Minnkota® Ultrex trolling motor.

    When our Target Lock Bracket ACC-TL is attached to a Receiver Ring it can be on the left or the right side of the trolling motor.

    The Receiver Ring attaches to the trolling motor head and one or two accessories can then be attached.

    For example to attach a Humminbird® Mega 360 plus a Humminbird® Target Lock to an Ultrex Trolling Motor, the following products can be used:
    ACC-RR-ULT + ACC-TL + ACC-RR-30

    When placing your order, please choose the correct Receiver Ring for your type of trolling motor.

    Our Products are Proudly designed and built in the USA

    See More Fish   ……….   Catch More Fish

     

    $199.00
    Add to cart
  • LB-CMC-5/5-8 to fit 5.5 to 8" CMC Jack Plate
    CMC L Bracket
    In Stock

    LB-CMC-5/5-8 to fit 5.5 to 8″ CMC Jack Plate

    L Bracket to attach a Transducer Shield to the side of a CMC jack plate.

    It is very important that you complete the questionnaire when ordering this item. 
    The information you provide will help us to assist you better and avoid a delay in shipping your order.

    $64.95
    Select options
  • LWG-2 Wedge for Hole Shot or Set Back install
    In Stock

    LWG-2 Wedge for Hole Shot or Set Back install

    LWG-2 wedge along with a Transducer Shield will put the transducer at the correct angle when the boat is in the water, when installed on a boat set back/step or Jack Plate hole shot plate.

    $19.95
    Select options
  • MK Filler Block used to attach another transducer to a Minnkota trolling motor with a built in Di Transducer
    Picture shows Filler Block attachment to fit onto a Minnkota T.Motor with built in Down Image Transducer
    On backorder

    MK-Filler Block used to attach a Transducer Shield to a MinnKota Ultrex 36 volt with a Built in Down Image Transducer

    Item # MK-UL-36-DI-Filler this item is used to attach a Transducer Shield to a 24v or 36v Minnkota “Ultrex” trolling motor with a built in Down Image transducer.

    For 36 volt includes two 4.0” and one 6″ heavy duty stainless steel black powder coated straps.

    This item must be attached to a Transducer Shield (sold separately) in order for this item to work on the trolling motor.  After ordering the Filler, please Click on Shields to choose the correct Transducer Shield to suit your transducer.

    Proudly Designed and Built in USA

    See More Fish  ……….   Catch More Fish

     

    $71.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • Quest Adaptor Bracket
    Quest Adaptor Plate attached to a TS-AIHD-TS Combo to a Quest Trolling Motor
    In Stock

    Quest Trolling Motor Adaptor Plate

    Item # Q-A-Plate – Quest Adaptor Plate is built in 6061 High Quality Aluminum Alloy and Black Powder Coated.  

    About our Adaptor Plate:  the Adaptor Plate can be attached to a Transducer Shield which will allow you to attach the Transducer Shield to a Minnkota Quest Trolling Motor so that the clamps / straps are attached to the housing correctly.

    About the Minnkota Quest Trolling Motor:  the Minnkota Quest housing is configured differently to  previous Minnkota models:  1. the  skeg  is off set ;  2. the  shaft is larger on the housing;  and  3.  the US2 sonar is shaped differently to the previous Ultrex trolling motor.
    The Good News is – if you already own one of our Transducer Shields simply purchase the Quest Adaptor Plate which will easily attach it to your previously purchased Transducer Shield (TM-H8.3,  TG-HG-8.5,  TS-AIHD-TS or TS-DSS3-TS).
    On the longer TS-DSS3-TS and TS-AIHD-TS Transducer Shields, it will be necessary to purchase an additonal component “Ram” to close the gap between the US2 cone and the Transducer Shield.  When placing your order, please select the Adaptor Plate with a Ram.
    The Quest Adaptor Plate cannot be used with a transducer only, it must be attached to a Transducer Shield.

                   Another Cool Product Proudly Designed in USA     

                     See More Fish ……….  Catch More Fish

    $40.00 – $81.85
    Select options This product has multiple variants. The options may be chosen on the product page
  • RAM BT-2 for Humminbird XTM trolling motor transducers
    Ram BT and Strap showing transducer
    In Stock

    RAM BT-2 for Humminbird XTM trolling motor transducers

    Ram and Strap to fit a Humminbird® trolling motor XTM style transducer.  Enlarge photos to identify your transducer.  Please complete the questionnaire when ordering this item.

    $34.95
    Select options
  • SSC-3 fits Humminbird XNT 9 20
    SSC-3 to fit Humminbird high speed transducer
    In Stock

    SSC-3 fits Humminbird XNT 9 20 T or XNT 14 20 T xDucer on a Trolling Motor

    To attach and protect your Humminbird®  XNT 9 20 T or  XNT 14 20 T (transom style) transducer on a Trolling Motor.  (This Transducer Shield will not fit Humminbird Side Image Transducer # XNT 9 SI 180 T.  Please see Transducer Shield  # TM-CSI)

    Please complete the information below when ordering this item.

    $39.95
    Select options
  • Transducer Shield # SSC-4 to fit Humminbird XNT 9 20
    SSC-4 to fit Humminbird puck transducers
    In Stock

    SSC-4 fits Humminbird XP 9 20 (T), XTM 9 20 T or XTM 14 20 T xDucers on a Trolling Motor

    Fits Humminbird® Puck Transducer
    XP 9 20 (T),  XTM 9 20 T or XTM 14 20 T.   This shield does not fit any of Humminbird’s side image transducers.

    $39.95
    Select options
  • TM-CSI-2 fits Humminbird Side Image XNT 9 SI 180 T, XNT 9 HW MSI 150 T or XNT 9 QB 90 T xDucer for Trolling Motor, Jack Plate or Set Back
    Transducer Shield TM-CSI-2 and Humminbird compact side image transducer (not included)
    In Stock

    TM-CSI-2 fits Humminbird Side Image XNT 9 SI 180 T, XNT 9 HW MSI 150 T or XNT 9 QB 90 T xDucer for Trolling Motor, Jack Plate or Set Back

    Fits Humminbird® Compact Side Image XNT 9 SI 180T, XNT 9 HW MSI 150 T or Quad Beam XNT 9 QB 90 T transducer

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $74.95
    Select options
  • Transducer Shield # TM-DI fits Humminbird Down Image Transducer # XNT 9 DI
    Transducer Shield TM-DI shown with transducer (not included)
    In Stock

    TM-DI fits Humminbird Down Image XNT 9 DI T xDucer for Trolling Motor, Jack Plate or Set Back

    TM-DI fits Humminbird® Down Image Transducer # XNT 9 DI T for trolling motor, set back or jack plate installation.  It DOES NOT fit the redesigned Down Image transducer # # XNT 9 DI T (RD). Onix Down Image Transducer XNT 14 DI T (RD) or XM 9 MDI T.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $74.95
    Select options
  • TM-DI-2 fits the Humminbird redesigned Down Image Transducer
    Picture shows Humminbird redesigned Down Image transducer (not included) and TM-DI-2 Transducer Shield
    In Stock

    TM-DI-2 fits Humminbird Down Image Xducer # XNT 9 DI T (RD), XM 9 MDI T, Mega XNT 9 HW MDI 75 T or Onix Xducer # XNT 14 DI T (RD) for Trolling Motor, Jack Plate or Set Back

    TM-DI-2 fits Humminbird® Down Image Transducer # XNT 9 DI T (RD),  XNT 14 DI T (RD) and XNT 9 HW MDI 75 T for trolling motor, set back or jack plate installation.  It DOES NOT fit the ORIGINAL Down Image transducer # # XNT 9 DI T.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $79.95
    Select options
  • TM-HDsi fits Humminbird® HDSI xDucer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T
    TM-HDsi
    In Stock

    TM-HDsi fits Humminbird® HDSI xDucer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T

    TM-HDSi fits Humminbird® High Definition Side Image Transducer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T for trolling motor, set back or jack plate installation. 

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

     

    $79.95
    Select options
  • TM-XTM-75/150 T to fit Humminbird XTM 9 HW MDI 75 T or XTM 9 HW MSI 150 T transducer
    In Stock

    TM-XTM-75/150 T to fit Humminbird XTM 9 HW MDI 75 T or XTM 9 HW MSI 150 T transducer

    TM-XTM-75/150 T fits Humminbird® Helix Mega Di transducer XTM 9 HW MDI 75 T or Helix Mega Si transducer XM 9 HW MSI 150 T. for trolling motor, set back, hole shot plate or jack plate installation.
    If this item is going on a Trolling Motor, please answer the trolling motor questions.  If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.  It is very important that you answer the questionnaire in full please.
    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $99.95
    Select options
  • TM-HX-3 fits Humminbird® Helix G2N Mega Si or Solix G1N Si Transducer
    In Stock

    TM-HX-3 fits Humminbird® Helix G2N Mega Si or Solix G1N Si Transducer

    TM-HX-3 fits Humminbird® Chirp Helix Mega Si GPS G2N transducer XM 9 20 MSI T or Solix G2N  Si XM transducer XM 14 20 MSI T for trolling motor, set back or jack plate installation.  If this item is going on a Trolling Motor, please answer the trolling motor questions.  If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.  It is very important that you answer the questionnaire in full please.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $179.00
    Select options
  • TM-ONIX-1 fits Humminbird Side Image Xducer XT 14 20 HDSI T or XT 14 74 HDSI T
    TM-ONIX-1
    In Stock

    TM-ONIX-1 fits Humminbird Side Image Xducer XT 14 20 HDSI T or XT 14 74 HDSI T

    TM-ONIX-1 fits Humminbird® HD Side Image Transducer # XT 14 20 HDSI T or XT 14 74 HDSI T for trolling motor, set back or jack plate installation.  It DOES NOT fit the REDESIGNED transducer # XT 14 20 HDSI T (RD).       ONIX transducer differences

     

     

     

    $79.95
    Select options