Shields – Transducer Shield and Saver

Showing 1–30 of 46 results

“Garmin Force Rail Kit” has been added to your cart. View cart

In Stock

TS-AIHD-TS fits Lowrance® ActiveImaging HD™ or FishReveal

Item # TS-AIHD-TS is designed to fit Lowrance® Active Imaging HD™ 3-in-1 Transducer # 000-16062-001 (approx. 10-1/4” long x 2” wide x 1-1/4” thick and the cable comes out from the back).

It is formatted for installation on the side of the jack plate, hole shot plate or set back. If you are interested in installing to your transom, please see our Armor Plates.

$199.00

Select options
In Stock

TS-AIHD-TS Combo fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001 on a trolling motor

^{Item # TS-AIHD-TS Combo}^{is built in High Quality Aluminum Alloy and Black Powder Coated for Trolling Motor installation. It is designed to fit Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ transducer # 000-16060-001. The transducer is approx. 10-1/4” long x 2” wide x 1-1/2″ thick and the cable comes out on top near the back.}

^{It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$225.95

Select options
In Stock

TS-DSS3-TS to fit Lowrance®Total Scan, Structure Scan 3D and HDS Live xDucer 2-in-1 or 3-in-1 on Jack Plate, Hole Shot or Transom Set Back

Choose this item for Jack Plate, Hole Shot Plate or Set Back installation to attach a Lowrance®/Simrad® Total Scan transducer # 000-12568-001 or Lowrance®/Simrad® Structure Scan 3D transducer # 000-12396-001 on a Jack Plate or Transom Set Back. This Transducer Shield will also fit the New Lowrance HDS LIVE Active Imaging 2-in-1 transducer # 000-14490-001 and 3-in-1 transducer # 000-14489-001. NOTE: this item DOES NOT fit the ActiveImageing HD 3-in-1 Transducer # 000-16062-001 or ActiveImaging HD 3-in-1 FishReveal Transducer # 000-1060-001.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

For trolling motor installation go to TS-DSS3-TS-COMBO.
It is VERY IMPORTANT that you complete the questionnaire when ordering this product.

$189.00

Select options
In StockNew!

TM-CMSI-7.1 Combo kit – For Trolling Motor

Choose this item to attach a fits Humminbird® Transducer XM 14 HW CMSI T. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

$215.95

Select options
In Stock

TS-DSS3-TS Combo fits Lowrance® Total Scan & Live Active Imaging 2-in-1 or 3-in-1 xDucer on a Trolling Motor

Choose this item to attach a Lowrance® Total Scan transducer # 000-12568-001 on a Trolling Motor. This Transducer Shield will fit the Lowrance Live Active Imaging transducer # 000-14490-001 or 3-IN-1 transducer # 000-14489-001 NOTE: this item DOES NOT fit the ActiveImage HD 3-in-1 # 000-16062-001 or the ActiveImage HD 3-in-1 FishReveal Transducer # 000-16060-001 It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

$215.95

Select options
In Stock

TS-TRI-SH to fit Lowrance Hook 2 / Reveal Triple Shot Transducer # 000-14029-001 on Jack Plate, Hole Shot Plate or Set Back

^{Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 for Jack Plate, Hole Shot Plate or Transom Set Back. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001}
^{NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}

$189.00

Select options
In Stock

TS-TRI-SH combo to fit Lowrance Hook 2 / Reveal Triple Shot xDucer 000-14029-001 on Trolling Motor

_{Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Trolling Motor. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot Transducer # 000-16285-001}

$215.95

Select options
In Stock

TS-SP-SH to fit Lowrance® Hook2 Split Shot transducer 000-14028-001 & Eagle Splitshot HD 000-16284-001.

Fits Lowrance® Hook² Split Shot transducer 000-14028-001 It can be attached to a trolling motor, to the side of a Jack Plate with an L Bracket, or on a hole shot plate (under the jack plate) with a Wedge. This Transducer Shield will NOT fit the latest Lowrance Split Shot transducer # 000-16284-001

$89.95

Select options
In Stock

SSC-1 fits Lowrance HST-WSBL (106-72) 83/200kHz Skimmer transducer on a Trolling Motor

_{To attach and protect your Lowrance® Skimmer® HST-WSBL (106-72) Transducer on a Trolling Motor. (This shield will NOT fit Lowrance HDI transducer # 000-10976-001 or 000-10977-001 Please see Transducer Shield # TS-HDI-4 and TS-HDI-3)}_{Please complete the information below when ordering this item.}

$39.95

Select options
In Stock

SSC-2 fits Lowrance Pod PDT-WBL (106-74) transducer on a Trolling Motor

^{Fits Lowrance® Pod transducer PDT-WBL (106-74).}
^{(With slight modifications, this Transducer Shield can be used for the Garmin® Pod transducer)}

$39.95

Select options
In Stock

TG-DS-8.4 fits Garmin GT40

^{TG-DS-8.4 Transducer Shield is ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back. Additional components will be required. NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane. For bottom reading on plane, a transducer inside the hull will be required. It is very important that you complete the questionnaire when ordering this item.}

$139.95

Select options
In Stock

TG-HG-8.5 Transducer Shield to fit Garmin GT 56 or GT 36

TG-HG-8.5 Transducer Shield ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back. Additional components will be required.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane. For bottom reading on plane, a transducer inside the hull will be required.

$159.00

Select options
In Stock

TG-GT-6 to fit Garmin GT22, GT24, GT52 or GT54

Choose this item to attach a Garmin® Transducers GT 22, GT 24, GT52 or GT54 on a Trolling Motor, Jack Plate or Transom Set Back. This Transducer Shield will not fit the new Garmin GT 36 or GT56 transducer.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

$109.95

Select options
In Stock

TM-H8.3 fits Humminbird® Solix or Helix Mega G2N, G3N or G4N Mega MSI T Transducer

TM-H-8.3 fits Humminbird® Solix Mega Si GPS G2N, G3N transducer XM 14 HW MSI T or Helix Mega Si GPS G3N or G4N transducer XM 9 HW MSI T, XTM 9 HW MSI T or XM 14 HW MSI T. If this item is going on a Trolling Motor, please answer the trolling motor questions. If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.

NOTE: A transducer attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, will not track the bottom when the boat is up on plane. An in hull transducer will be required or recommended to track the bottom when the boat is up on plane.

$179.00

Select options
In Stock

TM-H7.1 fits Humminbird® Solix Mega G2N or G3N DiTransducer XM 14 HW MDI T or Helix Mega G3N or G4N Di Transducer XM 9 HW MDI T

TM-H-7.1 fits Humminbird® SOLIX Mega Di GPS G2N transducer XM 14 HW MDI T or XTM 14 HW MDI T or Helix Mega Di GPS G3N transducer XM 9 HW MDI T or XTM 9 HW MDI T for trolling motor, set back, hole shot plate or jack plate installation. If this item is going on a Trolling Motor, please answer the trolling motor questions. If this item is going on the Jack Plate please answer all the questions about your jack plate and boat. It is very important that you answer the questionnaire in full please.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$179.00

Select options
In Stock

TM-CMSI-7.1 fits Humminbird® Transducer XM 14 HW CMSI T – Compact MEGA Side Imaging+ Transducer

TM-CMSI-7.1 fits Humminbird® Transducer XM 14 HW CMSI T

$179.00

Select options
In Stock

RAM BT-2 for Humminbird XTM trolling motor transducers

Ram and Strap to fit a Humminbird® trolling motor XTM style transducer. Enlarge photos to identify your transducer. Please complete the questionnaire when ordering this item.

$34.95

Select options
In Stock

SSC-3 fits Humminbird XNT 9 20 T or XNT 14 20 T xDucer on a Trolling Motor

_{To attach and protect your Humminbird® XNT 9 20 T or XNT 14 20 T (transom style) transducer on a Trolling Motor. (This Transducer Shield will not fit Humminbird Side Image Transducer # XNT 9 SI 180 T. Please see Transducer Shield # TM-CSI)}

_{Please complete the information below when ordering this item.}

$39.95

Select options
In Stock

SSC-4 fits Humminbird XP 9 20 (T), XTM 9 20 T or XTM 14 20 T xDucers on a Trolling Motor

Fits Humminbird® Puck Transducer
XP 9 20 (T), XTM 9 20 T or XTM 14 20 T. This shield does not fit any of Humminbird’s side image transducers.

$39.95

Select options
In Stock

TM-CSI-2 fits Humminbird Side Image XNT 9 SI 180 T, XNT 9 HW MSI 150 T or XNT 9 QB 90 T xDucer for Trolling Motor, Jack Plate or Set Back

Fits Humminbird® Compact Side Image XNT 9 SI 180T, XNT 9 HW MSI 150 T or Quad Beam XNT 9 QB 90 T transducer

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$74.95

Select options
In Stock

TG-D-Vü fits Garmin GT20

To fit Garmin HD ID Down Vu (8 pin) transducer number 010-12087-001 (GT20-TM)

$89.95

Select options
In Stock

TG-DS-9 fits Garmin GT21, GT23, GT41, GT50 and GT51

Ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back. Additional components will be required. This Transducer Shield will not fit the new Garmin GT 36 or GT 56 transducer.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.

$149.95

Select options
In Stock

TG-DS-Vu to fit Garmin GT30 and GT34

This item is user friendly for various installation options – * Trolling Motor * Side of the Jack Plate * Hole Shot Plate or * Set Back Additional components are required.
When ordering this item, please note in the comment area which transducer you have. Either the Garmin GT30 or GT34 transducer. It is important for us to know this please. This Transducer Shield DOES NOT fit the Garmin GT 36 or GT 56 transducer.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$89.95

Select options
Out Of Stock

TG-TUG to fit Garmin traditional dual beam / dual frequency transducer # 010-10272-00 or 010-10249-20

TG-TUG is Ideal for Installing on a trolling motor. It can also be attached on the side of a jack plate or on the boat set back with additional components.

$139.00

Select options
In Stock

TG-GT30-3D Transducer Shield to fit Garmin DownVü/SideVü GT30 and Pod GT8HW transducers together

Available Now. Transducer Shield to fit Garmin® DownVü/SideVü GT30-TM Transducer and GT8HW-IH pod transducer in tandem on trolling motors.

$224.95

Select options
In Stock

TM-AM-TM150-T to fit Airmar Transom transducer on Trolling Motor

Transducer Shield # TM-AM-TM150T to fit Airmar transom style transducer TM150-T onto a Trolling Motor. Please complete the questionnaire when ordering this item.

If your Airmar transducer can be taken apart to remove the pod from inside the casing, then this is not the Transducer Shield for you.

$149.00

Select options
In Stock

TM-DI fits Humminbird Down Image XNT 9 DI T xDucer for Trolling Motor, Jack Plate or Set Back

TM-DI fits Humminbird® Down Image Transducer # XNT 9 DI T for trolling motor, set back or jack plate installation. It DOES NOT fit the redesigned Down Image transducer # # XNT 9 DI T (RD). Onix Down Image Transducer XNT 14 DI T (RD) or XM 9 MDI T.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$74.95

Select options
In Stock

TM-DI-2 fits Humminbird Down Image Xducer # XNT 9 DI T (RD), XM 9 MDI T, Mega XNT 9 HW MDI 75 T or Onix Xducer # XNT 14 DI T (RD) for Trolling Motor, Jack Plate or Set Back

TM-DI-2 fits Humminbird® Down Image Transducer # XNT 9 DI T (RD), XNT 14 DI T (RD) and XNT 9 HW MDI 75 T for trolling motor, set back or jack plate installation. It DOES NOT fit the ORIGINAL Down Image transducer # # XNT 9 DI T.

^NOTE^{: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}

$79.95

Select options
In Stock

TM-HDsi fits Humminbird® HDSI xDucer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T

_{TM-HDSi fits Humminbird® High Definition Side Image Transducer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T for trolling motor, set back or jack plate installation.}

^NOTE^{: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}

$79.95

Select options
In Stock

Garmin Force Rail Kit
$99.95

Add to cart

CLOSE

My Account
Search

Search for:
1