Showing 1–30 of 160 results
-
-
-
-
Spring-2 additional spring for SBB-4
$9.95Spring-2 is an additional stainless steel spring used along with our SBB-4 for larger transducers.
-
“The Wedge” – Trolling Motor Shallow Water Bracket
$114.95 – $134.95Let’s Fish Shallow with “The Wedge”. No more holding the trolling motor rope to fish shallow.
Simply place “The Wedge” beneath the trolling motor bracket and GO SHALLOW.
Available to fit Garmin Force, Lowrance Ghost, Minnkota Ultrex and Fortrex or Motorguide Pro Tour. -
HDTS-B stainless black powder coated Transducer Strap
$5.95Heavy duty stainless steel black powder coated straps available in three different sizes. Used to attach the Transducer Shield to a trolling motor. Click on Strap Length to choose the correct size strap for your trolling motor.
-
360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex
$149.00Item # 360 Stabilizer to stabilize the Humminbird® 360 Imaging on a Minnkota® Ultrex trolling motor. It is built in 5/16 aluminum alloy and black powder coated. The total length is 15-1/2″ and attaches to the existing Humminbird® 360 Imaging bracket on a Minnkota® Ultrex Trolling Motor.
The purpose of our 360 Stabilizer is to: (1) reduce vibration of the Humminbird® 360 when the boat is up on plane and going through rough conditions (2) reduce the chance of breaking the Humminbird® 360 shaft when the transducer comes in contact with underwater obstruction (3) adds support to the Humminbird® 360 shaft and reduces flexing (4) reduces vibration to the 360 transducer when the trolling motor is deployed in the water and in trolling mode, and (5) enhances the structure definition on the fish finder.
Simple installation: attach our 360 Stabilizer base bracket to the existing holes in the Humminbird® 360 mounting bracket and clamp the end of the 360 Stabilizer to the Humminbird® 360 shaft.
-
360 Humminbird – Fortrex Bracket to Ultrex # 360-S-CAB-ULT
$299.00360-S-CAB-ULT: Conversion Adapter Bracket will allow you to fit the original Humminbird 360 “S Shape bracket to a MinnkotaUltrex trolling motor.
-
360 Humminbird – Without a bracket to Ultrex # 360-F-CAB-ULT
$399.00360-F-CAB-ULT : Conversion Adapter Bracket will allow you to fit a Humminbird 360 without a bracket or a removable universal bracket to a Minnkota Ultrex trolling motor.
-
360 Humminbird to a Motorguide Tour 2″ Outer Shaft # 360-S-CAB-MG
$285.00360-S-CAB-MG: Conversion Adapter Bracket will allow you to fit the original Humminbird 360 “S” Shape bracket to the 2″ outer shaft on a Motorguide Tour or Tour Pro trolling motor.
-
Aluminum Skeg to fit Garmin Force Trolling Motor
$89.95AL-Skeg-Garmin 1/4″ Aircraft Aluminum Alloy, CNC Machined, Welded and Black Powder Coated.
“Aluminum vs Plastic” – Which one would you choose?
* Retrofit the plastic skeg with our Aluminum Skeg.
* Our Aluminum Skeg will also fit the optional Garmin Nose Cone with no built in sonar.
* Read more features and benefits ….. -
AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom
$49.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.
-
AP-D-Vu to fit Garmin GT20
$69.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
AP-DI to fit a Humminbird Down Image xDucer XNT 9 DI T on a Transom
$49.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.
-
AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom
$49.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
-
AP-DS-9 to fit Garmin GT41, GT50 & GT51
$79.95This product is designed to fit Garmin® DownVü/SideVü (with Chirp) transom mount transducer model GT41, GT50 and GT51.
For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate.
-
AP-DS-Vu to fit Garmin GT30 and GT34
$69.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom
$79.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate.
Recommended as an added accessory to our SBB-5 Spring Back Bracket. -
AP-SP-SH Armor Plate to fit Lowrance® Hook 2 Split Shot Transducer
$79.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. This Armor Plate will NOT fit the latest Lowrance Split Shot transducer # 000-16284-001
It is very important that you complete the questionnaire in full when ordering any of our products. -
AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom
$94.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. This Armor Plate will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001
It is very important that you complete the questionnaire in full when ordering any of our products. -
AP-DSi to fit Lowrance DSI xDucer 000-10260-001 on a Transom
$49.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boat without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.
-
AP-GAR-2 to Fit Garmin Dual Beam transducer
$74.95Armor Plate AP-GAR-2 to fit Garmin Dual Beam transducer. Enlarge the pictures to identify your transducer. Please answer all questions in the questionnaire.
-
AP-GT-6 to fit Garmin GT 22, GT 24, GT 52 or GT 54
$69.95For transom installation to protect your transducer from side to side and front to back impact.
Ideal for boats with flat transoms or for boats without a jack plate.
Recommended as an added accessory to our SBB-5 Spring Back Bracket.
It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.
-
AP-H-7.1 to fit Humminbird Helix Mega DI + Dual Spectrum Chirp Transducer # XM 9 HW MDI T or XM 14 HW CMSI T on a Transom
$84.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.
-
AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T
$89.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.
-
AP-HDI-2 to fit Lowrance HDI (83/200kHz) 000-10976-001 xDucer on a Transom
$59.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.
-
AP-HDI-3 to fit Lowrance HDI (50/200kHz) 000-10977-001 xDucer on a Transom
$74.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket # SBB-5. Please complete the questionnaire below when ordering this product.
-
AP-HUM-2 to fit Humminbird xDucer XNT 9 HW T, XNT 9 20 T & XNT 14 20 T on a Transom
$49.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms or for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.
