• TS-AIHD-TS-Combo attached to a Minnkota Ultrex trolling motor
    Lowrance Transducer identification
    In Stock

    TS-AIHD-TS Combo fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001 on a trolling motor

    Item # TS-AIHD-TS Combo is built in High Quality Aluminum Alloy and Black Powder Coated for Trolling Motor installation. It is designed to fit Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ transducer # 000-16060-001. The transducer is approx. 10-1/4” long x 2” wide x 1-1/2″ thick and the cable comes out on top near the back.  

    It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.

    $225.95
    Select options
  • TS-DSS3-TS Combo fits Lowrance® Total Scan & Live Active Imaging 2-in-1 or 3-in-1 xDucer on a Trolling Motor
    In Stock

    TS-DSS3-TS Combo fits Lowrance® Total Scan & Live Active Imaging 2-in-1 or 3-in-1 xDucer on a Trolling Motor

    Choose this item to attach a Lowrance® Total Scan transducer # 000-12568-001 on a Trolling Motor.  This Transducer Shield will fit the Lowrance Live Active Imaging transducer # 000-14490-001 or 3-IN-1 transducer # 000-14489-001 NOTE:  this item DOES NOT fit the ActiveImage HD 3-in-1 # 000-16062-001 or the ActiveImage HD 3-in-1 FishReveal Transducer # 000-16060-001    It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

     

    $215.95
    Select options
  • Transducer Shield # TG-GT-6
    TG-GT-6 shown with Garmin Transducer (not included)
    In Stock

    TG-GT-6 to fit Garmin GT22, GT24, GT52 or GT54

    Choose this item to attach a Garmin® Transducers GT 22, GT 24, GT52 or GT54 on a Trolling Motor, Jack Plate or Transom Set Back.  This Transducer Shield will not fit the new Garmin GT 36 or GT56 transducer.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

    $109.95
    Select options
  • TM-H8.3 fits Humminbird Mega MSI Transducer
    Transducer Shield TM-H8.3 components
    In Stock

    TM-H8.3 fits Humminbird® Solix or Helix Mega G2N, G3N or G4N Mega MSI T Transducer

    TM-H-8.3 fits Humminbird® Solix Mega Si GPS G2N, G3N transducer XM 14 HW MSI T or Helix Mega Si GPS G3N or G4N transducer XM 9 HW MSI T,  XTM 9 HW MSI T or XM 14 HW MSI T.   If this item is going on a Trolling Motor, please answer the trolling motor questions.  If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.

    NOTE:  A transducer attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, will not track the bottom when the boat is up on plane.  An in hull transducer will be required or recommended to track the bottom when the boat is up on plane.

    $179.00
    Select options
  • TM-H7.1 fits Humminbird® Solix Mega G2N or G3N DiTransducer XM 14 HW MDI T or Helix Mega G3N or G4N Di Transducer XM 9 HW MDI T
    TM-H7.1 picture shows Transducer Shield Rail and Block
    In Stock

    TM-H7.1 fits Humminbird® Solix Mega G2N or G3N DiTransducer XM 14 HW MDI T or Helix Mega G3N or G4N Di Transducer XM 9 HW MDI T

    TM-H-7.1 fits Humminbird® SOLIX Mega Di GPS G2N transducer XM 14 HW MDI T or XTM 14 HW MDI T or Helix Mega Di GPS G3N transducer XM 9 HW MDI T or XTM 9 HW MDI T for trolling motor, set back, hole shot plate or jack plate installation.  If this item is going on a Trolling Motor, please answer the trolling motor questions.  If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.  It is very important that you answer the questionnaire in full please.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $179.00
    Select options
  • RAM BT-2 for Humminbird XTM trolling motor transducers
    Ram BT and Strap showing transducer
    In Stock

    RAM BT-2 for Humminbird XTM trolling motor transducers

    Ram and Strap to fit a Humminbird® trolling motor XTM style transducer.  Enlarge photos to identify your transducer.  Please complete the questionnaire when ordering this item.

    $34.95
    Select options
  • TM-CSI-2 fits Humminbird Side Image XNT 9 SI 180 T, XNT 9 HW MSI 150 T or XNT 9 QB 90 T xDucer for Trolling Motor, Jack Plate or Set Back
    Transducer Shield TM-CSI-2 and Humminbird compact side image transducer (not included)
    In Stock

    TM-CSI-2 fits Humminbird Side Image XNT 9 SI 180 T, XNT 9 HW MSI 150 T or XNT 9 QB 90 T xDucer for Trolling Motor, Jack Plate or Set Back

    Fits Humminbird® Compact Side Image XNT 9 SI 180T, XNT 9 HW MSI 150 T or Quad Beam XNT 9 QB 90 T transducer

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $74.95
    Select options
  • TG-TUG to fit Garmin traditional dual beam / dual frequency transducer # 010-10272-00 or 010-10249-20
    Transducer Shield to fit Garmin dual beam 4 pin transducer
    Out Of Stock

    TG-TUG to fit Garmin traditional dual beam / dual frequency transducer # 010-10272-00 or 010-10249-20

    TG-TUG is Ideal for Installing on a trolling motor.  It can also be attached on the side of a jack plate or on the boat set back with additional components.

    $139.00
    Select options
  • TM-DI-2 fits the Humminbird redesigned Down Image Transducer
    Picture shows Humminbird redesigned Down Image transducer (not included) and TM-DI-2 Transducer Shield
    In Stock

    TM-DI-2 fits Humminbird Down Image Xducer # XNT 9 DI T (RD), XM 9 MDI T, Mega XNT 9 HW MDI 75 T or Onix Xducer # XNT 14 DI T (RD) for Trolling Motor, Jack Plate or Set Back

    TM-DI-2 fits Humminbird® Down Image Transducer # XNT 9 DI T (RD),  XNT 14 DI T (RD) and XNT 9 HW MDI 75 T for trolling motor, set back or jack plate installation.  It DOES NOT fit the ORIGINAL Down Image transducer # # XNT 9 DI T.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $79.95
    Select options
  • TM-HDsi fits Humminbird® HDSI xDucer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T
    TM-HDsi
    In Stock

    TM-HDsi fits Humminbird® HDSI xDucer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T

    TM-HDSi fits Humminbird® High Definition Side Image Transducer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T for trolling motor, set back or jack plate installation. 

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

     

    $79.95
    Select options
  • TM-XTM-75/150 T to fit Humminbird XTM 9 HW MDI 75 T or XTM 9 HW MSI 150 T transducer
    In Stock

    TM-XTM-75/150 T to fit Humminbird XTM 9 HW MDI 75 T or XTM 9 HW MSI 150 T transducer

    TM-XTM-75/150 T fits Humminbird® Helix Mega Di transducer XTM 9 HW MDI 75 T or Helix Mega Si transducer XM 9 HW MSI 150 T. for trolling motor, set back, hole shot plate or jack plate installation.
    If this item is going on a Trolling Motor, please answer the trolling motor questions.  If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.  It is very important that you answer the questionnaire in full please.
    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $99.95
    Select options
  • TM-HX-3 fits Humminbird® Helix G2N Mega Si or Solix G1N Si Transducer
    In Stock

    TM-HX-3 fits Humminbird® Helix G2N Mega Si or Solix G1N Si Transducer

    TM-HX-3 fits Humminbird® Chirp Helix Mega Si GPS G2N transducer XM 9 20 MSI T or Solix G2N  Si XM transducer XM 14 20 MSI T for trolling motor, set back or jack plate installation.  If this item is going on a Trolling Motor, please answer the trolling motor questions.  If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.  It is very important that you answer the questionnaire in full please.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $179.00
    Select options
  • TS-LIVE-S to attach Lowrance LiveSight xDucer # 000-14458-001 on Jack Plate, Hole Shot or Transom Set Back
    TS-LIVE-S
    In Stock

    TS-LIVE-S to attach Lowrance LiveSight xDucer # 000-14458-001 on Jack Plate, Hole Shot or Transom Set Back

    This item is presently on Back Order.  Estimated Ship Date September 7th.  If you an order is placed, it will be held on back order and shipped as soon as it becomes available.  Thank you for your patience.  

    TS-LIVE-S to attach a Lowrance® LiveSight™ transducer # 000-14458-001 on a Jack Plate, Hole Shot Plate or Set Back.

    It is very important to complete the questionnaire below in full when ordering this item.

    $199.95
    Select options
  • TS-LSS-1 to fit Lowrance LSS1 Structure Scan xDucer on a Jack Plate & some Trolling Motors
    TS-LSS-1 to fit LSS1 structure scan transducer
    In Stock

    TS-LSS-1 to fit Lowrance LSS1 Structure Scan xDucer on a Jack Plate & some Trolling Motors

    This Transducer Shield® can be installed on a Trolling Motor that has a Built In Sonar in the cone, OR on a Jack Plate, Hole Shot Plate or Set Back.  Additional components will be required.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.
    It is Very Important that you complete the questionnaire when ordering this item.

    $149.00
    Select options
  • TS-LSS-2 fits Lowrance LSS1 Structure Scan xDucer on a Set Back or Hole Shot Plate
    TS-LSS-2 to fit LSS1 structure scan transducer
    In Stock

    TS-LSS-2 fits Lowrance LSS1 Structure Scan xDucer on a Set Back or Hole Shot Plate

    Fits Lowrance® LSS1 Structure Scan Transducer for Set Back or Hole Shot Plate Application.
    See TS-LSS2-L to fit the new LSS2 (10″)transducer

    $79.95
    Select options
  • TS-LSS2-3D fits Lowrance LSS2 Structure Scan & Pod xDucer together usually on a Trolling Motor
    TS-LSS2-3D to fit LSS2 structure scan transducer
    In Stock

    TS-LSS2-3D fits Lowrance LSS2 Structure Scan & Pod xDucer together usually on a Trolling Motor

    Transducer Shield to fit Lowrance LSS2 (10-1/4″) structure scan transducer and pod transducer in tandem on trolling motors.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

     

    $224.95
    Select options