jack plate – Transducer Shield and Saver

Showing all 21 results

In Stock

AP-SP-SH Armor Plate to fit Lowrance® Hook 2 Split Shot Transducer & Eagle Splitshot HD

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.
It is very important that you complete the questionnaire in full when ordering any of our products.

$79.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

TS-AIHD-TS Combo fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001 on a trolling motor

^{Item # TS-AIHD-TS Combo}^{is built in High Quality Aluminum Alloy and Black Powder Coated for Trolling Motor installation. It is designed to fit Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ transducer # 000-16060-001. The transducer is approx. 10-1/4” long x 2” wide x 1-1/2″ thick and the cable comes out on top near the back.}

^{It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$225.95

Select options
In Stock

TS-DSS3-TS Combo fits Lowrance® Total Scan & Live Active Imaging 2-in-1 or 3-in-1 xDucer on a Trolling Motor

Choose this item to attach a Lowrance® Total Scan transducer # 000-12568-001 on a Trolling Motor. This Transducer Shield will fit the Lowrance Live Active Imaging transducer # 000-14490-001 or 3-IN-1 transducer # 000-14489-001 NOTE: this item DOES NOT fit the ActiveImage HD 3-in-1 # 000-16062-001 or the ActiveImage HD 3-in-1 FishReveal Transducer # 000-16060-001 It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

$215.95

Select options
In Stock

6/8/10 inch BOB’S Machine Jack Plate – for STARBOARD side

LB-BM-6.8.10 Fits 6″, 8″ & 10″ Bob’s Hydraulic Jack Plates. Used to attach a Transducer Shield to the side of the jack plate.

It is very important that you complete the questionnaire when ordering this product. The information that you provide will help us to assist you better and avoid a delay in shipping your order. The more information that we have about your boat and jack plate, the better we can assist you.

Contact us if you need further assistance.

$59.95

Select options
On backorder

LB-BM-6/8/10 BOB’S Machine Shop Jack plate – PORT SIDE

LB-BM-6.8.10 Fits 6″, 8″ & 10″ Bob’s Hydraulic Jack Plates. Used to attach a Transducer Shield to the side of the jack plate.

$59.95

Add to cart
In Stock

EXT-1.5″ Extension

Aluminum 1.5″ Extension attached to an L. Bracket and Transducer Shield to lower the level of the transducer. This item is sometimes required on Skeeter & Bass Cat boats.

$35.00

Add to cart
In Stock

EXT-3.0 Extension

Aluminum extension attached between an L Bracket and Transducer Shield will lower the transducer if turning chines or trim tabs interfere with transducer side signal

$40.00

Add to cart
In Stock

TG-GT-6 to fit Garmin GT22, GT24, GT52 or GT54

Choose this item to attach a Garmin® Transducers GT 22, GT 24, GT52 or GT54 on a Trolling Motor, Jack Plate or Transom Set Back. This Transducer Shield will not fit the new Garmin GT 36 or GT56 transducer.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

$109.95

Select options
In Stock

TM-H8.3 fits Humminbird® Solix or Helix Mega G2N, G3N or G4N Mega MSI T Transducer

TM-H-8.3 fits Humminbird® Solix Mega Si GPS G2N, G3N transducer XM 14 HW MSI T or Helix Mega Si GPS G3N or G4N transducer XM 9 HW MSI T, XTM 9 HW MSI T or XM 14 HW MSI T. If this item is going on a Trolling Motor, please answer the trolling motor questions. If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.

NOTE: A transducer attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, will not track the bottom when the boat is up on plane. An in hull transducer will be required or recommended to track the bottom when the boat is up on plane.

$179.00

Select options
In Stock

Hydro Dynamics Rapid Jack

L. Adapter Bracket to fit Hydro Dynamics Rapid Jack jack plate. Used with a Transducer Shield to attach transducer to the side of the Jack Plate.

^{It is very important that you complete the questionnaire in full when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$49.95

Select options
In Stock

LB-3-RW Blank L. Bracket – STARBOARD side

L. Bracket without pre-drilled holes used on T-H Marine Manual and Pro Hi Jacker 6, 8, 10 and 12″ jack plates

$49.95

Select options
In Stock

LB-DETW-6.8.10 – L Bracket to attach a Transducer Shield to a Detwiler Jack Plate

L Bracket used to attach a Transducer Shield to the side of Detwiler 6″, 8″ or 10″ Jack Plate.

Please complete the questionnaire when placing your order. The more information that we have about your boat and jack plate, the better we can assist you. Contact us if you need further assistance.

$64.95

Select options
In Stock

LB-SM-10/12 for Slidemaster 10″ or 12″ Jack Plate

L Adaptor Bracket to attach a Transducer Shield on the side of a 10″ & 12″ Slide Master Jack Plate. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

$49.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

LB-SM-6/8 for Slidemaster 6″ or 8″ Jack Plate

L. Adapter Bracket to fit Slide Master 6″ and 8″ manual Jack Plate. Used to attach a Transducer Shield to the side of the jack plate.

It is VERY IMPORTANT that you complete the questionnaire in full when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

$49.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

RAM BT-2 for Humminbird XTM trolling motor transducers

Ram and Strap to fit a Humminbird® trolling motor XTM style transducer. Enlarge photos to identify your transducer. Please complete the questionnaire when ordering this item.

$34.95

Select options
Out Of Stock

Rite Hite L Bracket LB-RH-6

Rite Hite L Bracket without an Extender Plate is used when both pieces of the jack plate are at the same at the bottom of the jack plate.
Rite Hite L Bracket with an Extender Plate is used when the engine side piece of the jack plate is lower than the transom piece at the bottom.
Enlarge the jack plate pictures to determine which set up you will need.

Not sure what you need….. call 334-514-7147 or email a good side view photo of your jack plate showing the level of the bottom of the jack plate to: [email protected]

Price range: $54.95 through $103.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

TM-DI-2 fits Humminbird Down Image Xducer # XNT 9 DI T (RD), XM 9 MDI T, Mega XNT 9 HW MDI 75 T or Onix Xducer # XNT 14 DI T (RD) for Trolling Motor, Jack Plate or Set Back

TM-DI-2 fits Humminbird® Down Image Transducer # XNT 9 DI T (RD), XNT 14 DI T (RD) and XNT 9 HW MDI 75 T for trolling motor, set back or jack plate installation. It DOES NOT fit the ORIGINAL Down Image transducer # # XNT 9 DI T.

^NOTE^{: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}

$79.95

Select options
In Stock

TS-LIVE-S to attach Lowrance LiveSight xDucer # 000-14458-001 on Jack Plate, Hole Shot or Transom Set Back

This item is presently on Back Order. Estimated Ship Date September 7th. If you an order is placed, it will be held on back order and shipped as soon as it becomes available. Thank you for your patience.

TS-LIVE-S to attach a Lowrance® LiveSight™ transducer # 000-14458-001 on a Jack Plate, Hole Shot Plate or Set Back.

It is very important to complete the questionnaire below in full when ordering this item.

$199.95

Select options
In Stock

TS-LSS-1 to fit Lowrance LSS1 Structure Scan xDucer on a Jack Plate & some Trolling Motors

This Transducer Shield® can be installed on a Trolling Motor that has a Built In Sonar in the cone, OR on a Jack Plate, Hole Shot Plate or Set Back. Additional components will be required.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
It is Very Important that you complete the questionnaire when ordering this item.

$149.00

Select options
In Stock

TS-LSS-2 fits Lowrance LSS1 Structure Scan xDucer on a Set Back or Hole Shot Plate

Fits Lowrance® LSS1 Structure Scan Transducer for Set Back or Hole Shot Plate Application.
See TS-LSS2-L to fit the new LSS2 (10″)transducer

$79.95

Select options
In Stock

TS-LSS2-3D fits Lowrance LSS2 Structure Scan & Pod xDucer together usually on a Trolling Motor

^{Transducer Shield to fit Lowrance LSS2 (10-1/4″) structure scan transducer and pod transducer in tandem on trolling motors. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$224.95

Select options

CLOSE

My Account
Search

Search for:
1