Hook2 – Transducer Shield and Saver

Showing all 17 results

In Stock

AP-AI-HD to fit Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001
$79.95

Select options
In Stock

AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom

^{For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate.}
^{Recommended as an added accessory to our SBB-5 Spring Back Bracket.}

$79.95

Select options
In Stock

AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. This Armor Plate will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001
It is very important that you complete the questionnaire in full when ordering any of our products.

$94.95

Select options
In Stock

AP-DSi to fit Lowrance DSI xDucer 000-10260-001 on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boat without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

AP-HDI-2 to fit Lowrance HDI (83/200kHz) 000-10976-001 xDucer on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$59.95

Select options
In Stock

TS-DSS3-TS to fit Lowrance®Total Scan, Structure Scan 3D and HDS Live xDucer 2-in-1 or 3-in-1 on Jack Plate, Hole Shot or Transom Set Back

Choose this item for Jack Plate, Hole Shot Plate or Set Back installation to attach a Lowrance®/Simrad® Total Scan transducer # 000-12568-001 or Lowrance®/Simrad® Structure Scan 3D transducer # 000-12396-001 on a Jack Plate or Transom Set Back. This Transducer Shield will also fit the New Lowrance HDS LIVE Active Imaging 2-in-1 transducer # 000-14490-001 and 3-in-1 transducer # 000-14489-001. NOTE: this item DOES NOT fit the ActiveImageing HD 3-in-1 Transducer # 000-16062-001 or ActiveImaging HD 3-in-1 FishReveal Transducer # 000-1060-001.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

For trolling motor installation go to TS-DSS3-TS-COMBO.
It is VERY IMPORTANT that you complete the questionnaire when ordering this product.

$189.00

Select options
In Stock

TS-TRI-SH to fit Lowrance Hook 2 / Reveal Triple Shot Transducer # 000-14029-001 on Jack Plate, Hole Shot Plate or Set Back

^{Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 for Jack Plate, Hole Shot Plate or Transom Set Back. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001}
^{NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}

$189.00

Select options
In Stock

TS-TRI-SH combo to fit Lowrance Hook 2 / Reveal Triple Shot xDucer 000-14029-001 on Trolling Motor

_{Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Trolling Motor. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot Transducer # 000-16285-001}

$215.95

Select options
In Stock

TS-SP-SH to fit Lowrance® Hook2 Split Shot transducer 000-14028-001 & Eagle Splitshot HD 000-16284-001.

Fits Lowrance® Hook² Split Shot transducer 000-14028-001 It can be attached to a trolling motor, to the side of a Jack Plate with an L Bracket, or on a hole shot plate (under the jack plate) with a Wedge. This Transducer Shield will NOT fit the latest Lowrance Split Shot transducer # 000-16284-001

$89.95

Select options
In Stock

AP-LIVE-S to attach Lowrance LiveSight Transducer # 000-14458-001 on a trolling motor shaft

^{AP-LIVE-S when attached to a trolling motor shaft, the angle of the transducer can be adjusted and “Positive Locked”. Fits Lowrance® LiveSight™ transducer # 000-14458-001}

$199.95

Select options
In Stock

AP-LOW to fit Lowrance Skimmer xDucer 106-72 on a Transom

For transom installation to protect your transducer from side to side and front and back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

TS-HDI-3 fits Lowrance HDI xDucer (50/200kHz) 000-10977-001 for Trolling Motor or Jack Plate install

Fits Lowrance® Elite HDI (Hybrid Dual Imaging) Skimmer transducer # 000-10977-001 (50/200kHz)

$89.95

Select options
In Stock

TS-HDI-4 fits Lowrance HDI (83/200kHz) Transducer # 000-10976-001, # 000-12728-001 & # 000-12570-001

Fits Lowrance® HDI (Hybrid Dual Imaging) 83/200kHz Skimmer transducer # 000-10976-001. # 000-12728-001 & # 000-12570-001. It can be attached to a trolling motor, to the side of a Jack Plate with an L Bracket, or on a hole shot plate (under the jack plate) with a Wedge

$89.95

Select options
In Stock

TS-LSS-3D fits Lowrance LSS1 Structure Scan & Pod xDucers together usually on a Trolling Motor

Fits Lowrance® LSS1 (6″) Structure Scan Transducer with the Lowrance® Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$185.00

Select options
Out Of Stock

TS-LSS-3D-AM to fit Lowrance LSS1 and Airmar TM150 pod transducer

Fits Lowrance® LSS1 (6″) Structure Scan Transducer with an Airmar® (TM150M) Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$185.00

Select options
In Stock

TS-LSS2-3D-AM to fit Lowrance LSS2 structure scan and Airmar TM150 pod transducer

Fits Lowrance® LSS2 (10-1/4″) Structure Scan Transducer with an Airmar® (TM150M) Pod Transducer. It is very important that you complete the questionnaire when ordering this item.

$224.95

Select options
In Stock

TS-LSS2-L fits Lowrance LSS2 Structure Scan Transducer on a Jack Plate

_{Easily attaches a Lowrance® LSS2 structure scan transducer, with ADDITIONAL components to your Jack Plate or Boat Set Back.}

_{^NOTE^{: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}}

_{It is VERY IMPORTANT that you complete the questionnaire when ordering this item.}

$169.00

Select options

CLOSE

My Account
Search

Search for:
0