Showing all 20 results

  • L Bracket with Offset for an Atlas 8" to 12" Jack Plate
    Transducer Shield attached to the side of an Atlas Jack Plate
    In Stock

    ATLAS 8″ to 12″ Jack Plate – R3 (w/ offset) – for STARBOARD or DRIVER side

    L Bracket with 3 inch offset to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ or 12″ Jack Plate. Also available for the Port Side.       It is very important that you complete the questionnaire when ordering this item.you

    $79.95
    Select options
  • L Bracket with Offset for an Atlas 8" to 12" Jack Plate
    Transducer Shield attached to the side of an Atlas Jack Plate
    In Stock

    ATLAS 8″ to 12″ Jack Plate – L3 (w/ offset)- PORT or PASSENGER SIDE

    L Bracket with 3 inch offset to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ or 12″ Jack Plate. Also available for the Port Side.       It is very important that you complete the questionnaire when ordering this item.you

    $79.95
    Select options
  • Atlas 4" Jack Plate - L Bracket # LB-AT-4-Combo (with solid spacer)
    Spacer AT-Solid
    In Stock

    Atlas 4″ Jack Plate – L Bracket # LB-AT-4-Combo (with solid spacer)

    L Bracket – Combo with Solid Spacer to attach a Transducer Shield to the side of an Atlas Hydraulic 4” Jack Plate.

    It is very important that you complete the questionnaire when ordering this item.
    The information you provide will help us to assist you better and avoid a delay in shipping your order.

    $96.95
    Select options
  • LB-AT-6.8.10.12 without offset
    Atlas Jack Plate
    In Stock

    ATLAS 8″ to 14″ Jack Plate : L Bracket # LB-AT-4.6.8.10.12 (without offset)

    L Bracket to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ and 12″ Jack Plate. PLEASE make sure that your jack plate size and Transducer Shield is listed in the description to the left.  The larger transducers require our L Bracket with an “offset” or “spacer”  to keep the trim rod from hitting the transducer.

    It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

    $49.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • EXT-2.O" Extension
    EXT-2.O" Extension
    In Stock

    EXT-2.O” Extension

    An extension between an L Bracket & Transducer Shield to lower the transducer so as to avoid side viewing signal interference with hull turning chines.

    $35.00
    Add to cart
  • EXT-1.5" Extension
    EXT-1.5
    In Stock

    EXT-1.5″ Extension

    Aluminum 1.5″ Extension attached to an L. Bracket and Transducer Shield to lower the level of the transducer. This item is sometimes required on Skeeter & Bass Cat boats.

    $35.00
    Add to cart
  • EXT-3.0 Extension
    Picture shows an L Bracket + Extension + Transducer Shield
    In Stock

    EXT-3.0 Extension

    Aluminum extension attached between an L Bracket and Transducer Shield will lower the transducer if turning chines or trim tabs interfere with transducer side signal

    $40.00
    Add to cart
  • Hydro Dynamics Rapid Jack
    Hydronamics Rapid Jack
    In Stock

    Hydro Dynamics Rapid Jack

    L. Adapter Bracket to fit Hydro Dynamics Rapid Jack jack plate. Used with a Transducer Shield to attach transducer to the side of the Jack Plate.

    It is very important that you complete the questionnaire in full when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order. 

    $49.95
    Select options
  • Blank L Bracket to drill according to best fit Jack Plate
    TH Marine L bracket
    In Stock

    LB-3-RW Blank L. Bracket – STARBOARD side

    L. Bracket without pre-drilled holes used on T-H Marine Manual and Pro Hi Jacker 6, 8, 10 and 12″ jack plates

    $49.95
    Select options
  • ATLAS 8" to 12"
    In Stock

    LB-AT-4.6.8.10.12 to attach a Transducer Shield to ATLAS 8″ to 12″ jack plates

    L Adaptor Bracket used to install a Transducer Shield to the side of an Atlas 8″, 10″ & 12″ Hydraulic Jack Plates

    $49.95
    Select options
  • LB-SS-4-L to attach a Transducer Shield to Sea Star 4" jack plate
    In Stock

    LB-SS-4-L to attach a Transducer Shield to Sea Star 4″ jack plate

    L Adaptor Bracket used to install a Transducer Shield to the side of an Sea Star 4″ Hydraulic Jack Plate

    $59.95
    Select options
  • LB-SS-4-R to attach a Transducer Shield to Sea Star 4" jack plate
    In Stock

    LB-SS-4-R to attach a Transducer Shield to Sea Star 4″ jack plate

    L Adaptor Bracket used to install a Transducer Shield to the side of an Sea Star 4″ Hydraulic Jack Plate

    $59.95
    Select options
  • LB-SS-6-8-10-12-L to attach a Transducer Shield to Sea Star 6, 8, 10, 12" jack plate
    In Stock

    LB-SS-6-8-10-12-L to attach a Transducer Shield to Sea Star 6, 8, 10, 12″ jack plate

    L Adaptor Bracket used to install a Transducer Shield to the side of an Sea Star 6″, 8″, 10″ or 12″ Hydraulic Jack Plate

    $59.95
    Select options
  • LB-SS-6-8-10-12-R to attach a Transducer Shield to Sea Star 6, 8, 10, 12" jack plate
    In Stock

    LB-SS-6-8-10-12-R to attach a Transducer Shield to Sea Star 6, 8, 10, 12″ jack plate

    L Adaptor Bracket used to install a Transducer Shield to the side of an Sea Star 6″, 8″, 10″ or 12″ Hydraulic Jack Plate

    $59.95
    Select options
  • LB-CMC-5/5-8 to fit 5.5 to 8" CMC Jack Plate
    CMC L Bracket
    In Stock

    LB-CMC-5/5-8 to fit 5.5 to 8″ CMC Jack Plate

    L Bracket to attach a Transducer Shield to the side of a CMC jack plate.

    It is very important that you complete the questionnaire when ordering this item. 
    The information you provide will help us to assist you better and avoid a delay in shipping your order.

    $64.95
    Select options
  • LB-DETW-6.8.10 - L Bracket to attach a Transducer Shield to a Detwiler Jack Plate
    LB-DETW-6.8.10
    In Stock

    LB-DETW-6.8.10 – L Bracket to attach a Transducer Shield to a Detwiler Jack Plate

    L Bracket used to attach a Transducer Shield to the side of Detwiler 6″, 8″ or 10″ Jack Plate.

    Please complete the questionnaire when placing your order.  The more information that we have about your boat and jack plate, the better we can assist you.  Contact us if you need further assistance.

    $64.95
    Select options
  • L Bracket for a Slidemaster 10 or 12" Jack Plate
    Slidemaster 10/12 L. Bracket
    In Stock

    LB-SM-10/12 for Slidemaster 10″ or 12″ Jack Plate

    L Adaptor Bracket to attach a Transducer Shield on the side of a 10″ & 12″ Slide Master Jack Plate.  It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

    $49.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • L Bracket for a Slidemaster 6 or 8" Jack Plate
    In Stock

    LB-SM-6/8 for Slidemaster 6″ or 8″ Jack Plate

    L. Adapter Bracket to fit Slide Master 6″ and 8″ manual Jack Plate. Used to attach a Transducer Shield to the side of the jack plate.

    It is VERY IMPORTANT that you complete the questionnaire in full when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

    $49.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • MK Filler Block used to attach another transducer to a Minnkota trolling motor with a built in Di Transducer
    Picture shows Filler Block attachment to fit onto a Minnkota T.Motor with built in Down Image Transducer
    On backorder

    MK-Filler Block used to attach a Transducer Shield to a MinnKota Ultrex 36 volt with a Built in Down Image Transducer

    Item # MK-UL-36-DI-Filler this item is used to attach a Transducer Shield to a 24v or 36v Minnkota “Ultrex” trolling motor with a built in Down Image transducer.

    For 36 volt includes two 4.0” and one 6″ heavy duty stainless steel black powder coated straps.

    This item must be attached to a Transducer Shield (sold separately) in order for this item to work on the trolling motor.  After ordering the Filler, please Click on Shields to choose the correct Transducer Shield to suit your transducer.

    Proudly Designed and Built in USA

    See More Fish  ……….   Catch More Fish

     

    $71.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • Transducer Shield # TG-DS-Vu
    TG-DS-VU + Transducer (not included)
    In Stock

    TG-DS-Vu to fit Garmin GT30 and GT34

    This item is user friendly for various installation options – * Trolling Motor * Side of the Jack Plate * Hole Shot Plate or * Set Back Additional components are required.
    When ordering this item, please note in the comment area which transducer you have. Either the Garmin GT30 or GT34 transducer.  It is important for us to know this please. This Transducer Shield DOES NOT fit the Garmin GT 36 or GT 56 transducer.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $89.95
    Select options