Showing 1–30 of 83 results

  • 360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex
    Picture shows 360 Stabilizer attached to the shaft of a Humminbird 360
    In Stock

    360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex

    Item # 360 Stabilizer to stabilize the Humminbird® 360 Imaging on a Minnkota® Ultrex trolling motor.  It is built in 5/16 aluminum alloy and black powder coated.  The total length is 15-1/2″ and attaches to the existing Humminbird® 360 Imaging bracket on a Minnkota® Ultrex Trolling Motor.

    The purpose of our 360 Stabilizer is to:  (1)  reduce vibration of the Humminbird® 360 when the boat is up on plane and going through rough conditions  (2) reduce the chance of breaking the Humminbird® 360 shaft when the transducer comes in contact with underwater obstruction  (3) adds support to the Humminbird® 360 shaft and reduces flexing  (4) reduces vibration to the 360 transducer when the trolling motor is deployed in the water and in trolling mode, and  (5) enhances the structure definition on the fish finder.

    Simple installation:  attach our 360 Stabilizer base bracket to the existing holes in the Humminbird® 360 mounting bracket and clamp the end of the 360 Stabilizer to the Humminbird® 360 shaft.

    $149.00
  • 360 Humminbird - Fortrex Bracket to Ultrex   # 360-S-CAB-ULT
    360-MK-CAB
    In Stock

    360 Humminbird – Fortrex Bracket to Ultrex # 360-S-CAB-ULT

    360-S-CAB-ULT:   Conversion Adapter Bracket will allow you to fit the original Humminbird 360 “S Shape bracket to a MinnkotaUltrex trolling motor.

    $299.00
  • 360 Humminbird - Without a bracket to Ultrex   # 360-F-CAB-ULT
    360-F-CAB-ULT
    In Stock

    360 Humminbird – Without a bracket to Ultrex # 360-F-CAB-ULT

    360-F-CAB-ULT :  Conversion Adapter Bracket will allow you to fit a Humminbird 360 without a bracket or a removable universal bracket to a Minnkota Ultrex trolling motor.

    $399.00
  • 360 Humminbird to a Motorguide Tour 2" Outer Shaft   # 360-S-CAB-MG
    360-MG-CAB
    In Stock

    360 Humminbird to a Motorguide Tour 2″ Outer Shaft # 360-S-CAB-MG

    360-S-CAB-MG:   Conversion Adapter Bracket will allow you to fit the original Humminbird 360 “S” Shape bracket to the 2″ outer shaft on a Motorguide Tour or Tour Pro trolling motor.

     

    $285.00
  • Aluminum Skeg to fit Garmin Force Trolling Motor
    AL-Skeg-Garmin
    In Stock

    Aluminum Skeg to fit Garmin Force Trolling Motor

    AL-Skeg-Garmin  1/4″ Aircraft Aluminum Alloy, CNC Machined, Welded and Black Powder Coated.
    “Aluminum vs Plastic” – Which one would you choose?
    *  Retrofit the plastic skeg with our Aluminum Skeg.
    *  Our Aluminum Skeg will also fit the optional Garmin Nose Cone with no built in sonar.
    *  Read more features and benefits  …..

     

    $89.95
  • AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom
    AP-CSi Armor Plate
    In Stock

    AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $49.95
  • AP-D-Vu to fit Garmin  GT20
    AP-D-DU
    In Stock

    AP-D-Vu to fit Garmin GT20

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $69.95
  • AP-DI to fit a Humminbird Down Image xDucer XNT 9 DI T on a Transom
    AP-DI Armor Plate
    In Stock

    AP-DI to fit a Humminbird Down Image xDucer XNT 9 DI T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-4 Spring Back Bracket.

    $49.95
  • AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom
    AP-DI-2
    In Stock

    AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $49.95
  • AP-DS-8.4 to fit Garmin GT36, GT40 or GT56
    Picture shows Armor Plate # AP-DS-8.4 to fit Garmin GT36 or GT56 transducer
    In Stock
  • AP-DS-9 to fit Garmin GT41, GT50 & GT51
    AP-DS-9
    In Stock

    AP-DS-9 to fit Garmin GT41, GT50 & GT51

    This product is designed to fit Garmin® DownVü/SideVü (with Chirp) transom mount transducer model GT41, GT50 and GT51.

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.

    $79.95
  • AP-DS-Vu to fit Garmin GT30 and GT34
    AP-DS-VU
    In Stock

    AP-DS-Vu to fit Garmin GT30 and GT34

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $69.95
  • AP-AI-HD for Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001
    Armor Plate to fit Lowrance Pro HD Transducer
    In Stock

    AP-AI-HD for Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001

    Protect your transducer with our high quality, powder coted aluminum alloy ARMOR PLATE.  This plate is designed to replace your factory mount, providing superior all around impact protection while installed to your transom. 

    $79.95
  • AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom
    Picture shows Armor Plate with Lowrance 3-in-1 Transducer (not HD)
    In Stock

    AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.

    Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $79.95
  • AP-EAG-TRI-SH to fit Lowrance® Eagle Tripleshot Transducer # 000-16285-001 on a Transom
    In Stock

    AP-EAG-TRI-SH to fit Lowrance® Eagle Tripleshot Transducer # 000-16285-001 on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    It is very important that you complete the questionnaire in full when ordering any of our products.

    $94.95
  • AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom
    In Stock

    AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket.  This Armor Plate will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001 
    It is very important that you complete the questionnaire in full when ordering any of our products.

    $94.95
  • AP-DSi to fit Lowrance DSI xDucer 000-10260-001 on a Transom
    AP-DSi Armor Plate
    In Stock

    AP-DSi to fit Lowrance DSI xDucer 000-10260-001 on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boat without a jack plate.  Recommended as an added accessory to our SBB-4 Spring Back Bracket.

    $49.95
  • AP-GAR-2 to Fit Garmin Dual Beam transducer
    AP-GAR-2
    Out Of Stock

    AP-GAR-2 to Fit Garmin Dual Beam transducer

    Armor Plate AP-GAR-2 to fit Garmin Dual Beam transducer.  Enlarge the pictures to identify your transducer.  Please answer all questions in the questionnaire.

    $74.95
  • AP-GT-6 Armor Plate to fit Garmin GT22, GT24, GT52 or GT54
    Picture shows Garmin Transducer and AP-GT-6 Armor Plate (transducer is not included)
    In Stock

    AP-GT-6 to fit Garmin GT 22, GT 24, GT 52 or GT 54

    For transom installation to protect your transducer from side to side and front to back impact.

    Ideal for boats with flat transoms or for boats without a jack plate.

    Recommended as an added accessory to our SBB-5 Spring Back Bracket. 

    It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

     

    $69.95
  • AP-H-7.1 to fit Humminbird Helix Mega DI + Dual Spectrum Chirp Transducer # XM 9 HW MDI T or XM 14 HW CMSI T on a Transom
    AP-H-7.1
    In Stock

    AP-H-7.1 to fit Humminbird Helix Mega DI + Dual Spectrum Chirp Transducer # XM 9 HW MDI T or XM 14 HW CMSI T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $84.95
  • AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T
    Armor Plate AP-H-8.3 to fit Humminbird Mega SI Transducer
    In Stock

    AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T

    For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $89.95
  • AP-HDI-2 to fit Lowrance HDI (83/200kHz) 000-10976-001 xDucer on a Transom
    AP-HDI-2
    In Stock

    AP-HDI-2 to fit Lowrance HDI (83/200kHz) 000-10976-001 xDucer on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket.  Please complete the questionnaire below when ordering this product.

    $59.95
  • AP-HDI-3 to fit Lowrance HDI (50/200kHz) 000-10977-001 xDucer on a Transom
    AP-HDI-3
    In Stock

    AP-HDI-3 to fit Lowrance HDI (50/200kHz) 000-10977-001 xDucer on a Transom

    For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket # SBB-5.  Please complete the questionnaire below when ordering this product.

    $74.95
  • AP-HUM-2 to fit Humminbird xDucer XNT 9 HW T, XNT 9 20 T & XNT 14 20 T on a Transom
    AP-HUM Armor Plate
    In Stock

    AP-HUM-2 to fit Humminbird xDucer XNT 9 HW T, XNT 9 20 T & XNT 14 20 T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms or for boats without a jack plate.  Recommended as an added accessory to our SBB-4 Spring Back Bracket.

    $49.95
  • AP-HX-1 to fit Humminbird Mega SI or Solix SI  Transducer on a Transom
    In Stock

    AP-HX-1 to fit Humminbird Mega SI or Solix SI Transducer on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $89.95
  • Transducer Shield # TS-AIHD-TS
    Transducer Shield # TS-AIHD-TS
    In Stock

    TS-AIHD-TS fits Lowrance® ActiveImaging HD™ or FishReveal

    Item # TS-AIHD-TS is designed to fit Lowrance® Active Imaging HD™ 3-in-1 Transducer # 000-16062-001 (approx. 10-1/4” long x 2” wide x 1-1/4” thick and the cable comes out from the back). Also designed to fit # 003-32772-00.

    It is formatted for installation on the side of the jack plate, hole shot plate or set back.  If you are interested in installing to your transom, please see our Armor Plates.

    $199.00
  • TS-AIHD-TS-Combo attached to a Minnkota Ultrex trolling motor
    Lowrance Transducer identification
    In Stock

    TS-AIHD-TS Combo fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001 on a trolling motor

    Item # TS-AIHD-TS Combo is built in High Quality Aluminum Alloy and Black Powder Coated for Trolling Motor installation. It is designed to fit Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ transducer # 000-16060-001. Also designed to fit # 003-32772-00. The transducer is approx. 10-1/4” long x 2” wide x 1-1/2″ thick and the cable comes out on top near the back.  

    It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.

    $225.95
  • TS-DSS3-TS to fit Lowrance®Total Scan, Structure Scan 3D and HDS Live xDucer 2-in-1 or 3-in-1 on Jack Plate, Hole Shot or Transom Set Back
    TS-DSS3-TS
    In Stock

    TS-DSS3-TS to fit Lowrance®Total Scan, Structure Scan 3D and HDS Live xDucer 2-in-1 or 3-in-1 on Jack Plate, Hole Shot or Transom Set Back

    Choose this item for Jack Plate, Hole Shot Plate or Set Back installation  to attach a Lowrance®/Simrad® Total Scan transducer # 000-12568-001 or Lowrance®/Simrad® Structure Scan 3D transducer # 000-12396-001 on a Jack Plate or Transom Set Back. This Transducer Shield  will also fit the New Lowrance HDS LIVE Active Imaging 2-in-1 transducer # 000-14490-001 and 3-in-1 transducer # 000-14489-001. Also designed to fit # 003-20401-02 & # 003-27928-02.  NOTE:  this item DOES NOT fit the ActiveImageing HD 3-in-1 Transducer  # 000-16062-001 or ActiveImaging HD 3-in-1 FishReveal Transducer # 000-1060-001.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    For trolling motor installation go to TS-DSS3-TS-COMBO.
    It is VERY IMPORTANT that you complete the questionnaire when ordering this product.

    $189.00
  • TS-DSS3-TS Combo fits Lowrance® Total Scan & Live Active Imaging 2-in-1 or 3-in-1 xDucer on a Trolling Motor
    In Stock

    TS-DSS3-TS Combo fits Lowrance® Total Scan & Live Active Imaging 2-in-1 or 3-in-1 xDucer on a Trolling Motor

    Choose this item to attach a Lowrance® Total Scan transducer # 000-12568-001 on a Trolling Motor.  This Transducer Shield will fit the Lowrance Live Active Imaging transducer # 000-14490-001 or 3-IN-1 transducer # 000-14489-001.  Also designed to fit # 003-20401-02 & # 003-27928-02. NOTE:  this item DOES NOT fit the ActiveImage HD 3-in-1 # 000-16062-001 or the ActiveImage HD 3-in-1 FishReveal Transducer # 000-16060-001    It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

     

    $215.95