Brands – Page 2 – Transducer Shield and Saver

Showing 31–60 of 86 results

In Stock

TS-TRI-SH combo to fit Lowrance Hook 2 / Reveal Triple Shot xDucer 000-14029-001 on Trolling Motor

_{Choose this item to attach a Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Trolling Motor. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item. This Transducer Shield will NOT fit the latest Lowrance Triple Shot Transducer # 000-16285-001}

$215.95

Select options
In Stock

TS-SP-SH to fit Lowrance® Hook2 Split Shot transducer 000-14028-001 & Eagle Splitshot HD 000-16284-001.

Fits Lowrance® Hook² Split Shot transducer 000-14028-001 It can be attached to a trolling motor, to the side of a Jack Plate with an L Bracket, or on a hole shot plate (under the jack plate) with a Wedge. This Transducer Shield will NOT fit the latest Lowrance Split Shot transducer # 000-16284-001

$89.95

Select options
In Stock

SSC-1 fits Lowrance HST-WSBL (106-72) 83/200kHz Skimmer transducer on a Trolling Motor

_{To attach and protect your Lowrance® Skimmer® HST-WSBL (106-72) Transducer on a Trolling Motor. (This shield will NOT fit Lowrance HDI transducer # 000-10976-001 or 000-10977-001 Please see Transducer Shield # TS-HDI-4 and TS-HDI-3)}_{Please complete the information below when ordering this item.}

$39.95

Select options
In Stock

SSC-2 fits Lowrance Pod PDT-WBL (106-74) transducer on a Trolling Motor

^{Fits Lowrance® Pod transducer PDT-WBL (106-74).}
^{(With slight modifications, this Transducer Shield can be used for the Garmin® Pod transducer)}

$39.95

Select options
In Stock

AP-LIVE-S to attach Lowrance LiveSight Transducer # 000-14458-001 on a trolling motor shaft

^{AP-LIVE-S when attached to a trolling motor shaft, the angle of the transducer can be adjusted and “Positive Locked”. Fits Lowrance® LiveSight™ transducer # 000-14458-001}

$199.95

Select options
In Stock

AP-LOW to fit Lowrance Skimmer xDucer 106-72 on a Transom

For transom installation to protect your transducer from side to side and front and back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

AP-ONIX-HDSI to fit Humminbird Onix xDucer XT 14 20 HDSI T or XT 14 20 HDSI T (RD) on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket

$84.95

Select options
In Stock

TG-DS-8.4 fits Garmin GT40

^{TG-DS-8.4 Transducer Shield is ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back. Additional components will be required. NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane. For bottom reading on plane, a transducer inside the hull will be required. It is very important that you complete the questionnaire when ordering this item.}

$139.95

Select options
In Stock

FFS ELITE to attach a Forward Facing Sonar on a Trolling Motor Shaft

$299.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

TG-HG-8.5 Transducer Shield to fit Garmin GT 56 or GT 36

TG-HG-8.5 Transducer Shield ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back. Additional components will be required.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane. For bottom reading on plane, a transducer inside the hull will be required.

$159.00

Select options
In Stock

TG-GT-6 to fit Garmin GT22, GT24, GT52 or GT54

Choose this item to attach a Garmin® Transducers GT 22, GT 24, GT52 or GT54 on a Trolling Motor, Jack Plate or Transom Set Back. This Transducer Shield will not fit the new Garmin GT 36 or GT56 transducer.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

$109.95

Select options
In Stock

TM-H8.3 fits Humminbird® Solix or Helix Mega G2N, G3N or G4N Mega MSI T Transducer

TM-H-8.3 fits Humminbird® Solix Mega Si GPS G2N, G3N transducer XM 14 HW MSI T or Helix Mega Si GPS G3N or G4N transducer XM 9 HW MSI T, XTM 9 HW MSI T or XM 14 HW MSI T. If this item is going on a Trolling Motor, please answer the trolling motor questions. If this item is going on the Jack Plate please answer all the questions about your jack plate and boat.

NOTE: A transducer attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, will not track the bottom when the boat is up on plane. An in hull transducer will be required or recommended to track the bottom when the boat is up on plane.

$179.00

Select options
In Stock

TM-H7.1 fits Humminbird® Solix Mega G2N or G3N DiTransducer XM 14 HW MDI T or Helix Mega G3N or G4N Di Transducer XM 9 HW MDI T

TM-H-7.1 fits Humminbird® SOLIX Mega Di GPS G2N transducer XM 14 HW MDI T or XTM 14 HW MDI T or Helix Mega Di GPS G3N transducer XM 9 HW MDI T or XTM 9 HW MDI T for trolling motor, set back, hole shot plate or jack plate installation. If this item is going on a Trolling Motor, please answer the trolling motor questions. If this item is going on the Jack Plate please answer all the questions about your jack plate and boat. It is very important that you answer the questionnaire in full please.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$179.00

Select options
On backorder

TM-CMSI-7.1 fits Humminbird® Transducer XM 14 HW CMSI T – Compact MEGA Side Imaging+ Transducer

TM-CMSI-7.1 fits Humminbird® Transducer XM 14 HW CMSI T

$179.00

Select options
In Stock

Humminbird Target Lock Accessory Bracket Item # ACC-TL

Item # ACC-TL “Accessory Target Lock” is built in 6061 aircraft aluminum and black powder coated.
This item would be used in conjunction with our Receiver Ring system to attach a Humminbird® Target Lock to a Garmin®Force, Lowrance® Ghost or Minnkota® Ultrex trolling motor.

When our Target Lock Bracket ACC-TL is attached to a Receiver Ring it can be on the left or the right side of the trolling motor.

The Receiver Ring attaches to the trolling motor head and one or two accessories can then be attached.

For example to attach a Humminbird® Mega 360 plus a Humminbird® Target Lock to an Ultrex Trolling Motor, the following products can be used:
ACC-RR-ULT + ACC-TL + ACC-RR-30

When placing your order, please choose the correct Receiver Ring for your type of trolling motor.

Our Products are Proudly designed and built in the USA

See More Fish ………. Catch More Fish

$199.00

Add to cart
In Stock

Humminbird XP 9 20 T Puck Transducer

Humminbird In Hull Puck Transducer XP 9 20 T
*Easy Glue-in installation inside single layer fiberglass hulls

* includes Epoxy Kit and 20′ cable

$79.95

Add to cart
In Stock

Humminbird Y Cable # 9 M SIDBY # 720101-1 for Mega and all Side Image except Solix

Humminbird Y Cable allows split signal operation of Humminbird Side Imaging and dual beam transducers.

$39.95

Add to cart
In Stock

LWG-2 Wedge for Hole Shot or Set Back install

LWG-2 wedge along with a Transducer Shield will put the transducer at the correct angle when the boat is in the water, when installed on a boat set back/step or Jack Plate hole shot plate.

$19.95

Select options
In Stock

LWG-3 Wedge for Hole Shot or Set Back install

LWG-3 wedge along with a Transducer Shield will put the transducer at the correct angle when the boat is in the water, when installed on a boat set back/step or Hole Shot Plate under a Jack Plate.

$24.95

Select options
In Stock

Mega 360 14-pin Transducer Y-Cable (14 M360 2DDI Y)

MEGA 360 14-pin Transducer Y-Cable

Humminbird Part # 14 M360 2DDI Y (720108-1)

$74.95

Add to cart
In Stock

MG-360-SLEEVE to attach Humminbird 360 to Motorguide outer shaft

MG-360-Sleeve Aluminum Sleeve used to fit a Humminbird 360 Imaging to a Motorguide Trolling Motor Outer Shaft. IMPORTANT NOTE: Some of the NEWER Motorguide trolling motors have the same size shaft as Minnkota and will not need the MG-360-SLEEVE when attaching a Humminbird 360.

$98.95

Select options
In Stock

RAM BT-2 for Humminbird XTM trolling motor transducers

Ram and Strap to fit a Humminbird® trolling motor XTM style transducer. Enlarge photos to identify your transducer. Please complete the questionnaire when ordering this item.

$34.95

Select options
In Stock

SSC-3 fits Humminbird XNT 9 20 T or XNT 14 20 T xDucer on a Trolling Motor

_{To attach and protect your Humminbird® XNT 9 20 T or XNT 14 20 T (transom style) transducer on a Trolling Motor. (This Transducer Shield will not fit Humminbird Side Image Transducer # XNT 9 SI 180 T. Please see Transducer Shield # TM-CSI)}

_{Please complete the information below when ordering this item.}

$39.95

Select options
In Stock

SSC-4 fits Humminbird XP 9 20 (T), XTM 9 20 T or XTM 14 20 T xDucers on a Trolling Motor

Fits Humminbird® Puck Transducer
XP 9 20 (T), XTM 9 20 T or XTM 14 20 T. This shield does not fit any of Humminbird’s side image transducers.

$39.95

Select options
In Stock

TM-CSI-2 fits Humminbird Side Image XNT 9 SI 180 T, XNT 9 HW MSI 150 T or XNT 9 QB 90 T xDucer for Trolling Motor, Jack Plate or Set Back

Fits Humminbird® Compact Side Image XNT 9 SI 180T, XNT 9 HW MSI 150 T or Quad Beam XNT 9 QB 90 T transducer

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$74.95

Select options
In Stock

TG-D-Vü fits Garmin GT20

To fit Garmin HD ID Down Vu (8 pin) transducer number 010-12087-001 (GT20-TM)

$89.95

Select options
In Stock

TG-DS-9 fits Garmin GT21, GT23, GT41, GT50 and GT51

Ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back. Additional components will be required. This Transducer Shield will not fit the new Garmin GT 36 or GT 56 transducer.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.

$149.95

Select options
In Stock

TG-DS-Vu to fit Garmin GT30 and GT34

This item is user friendly for various installation options – * Trolling Motor * Side of the Jack Plate * Hole Shot Plate or * Set Back Additional components are required.
When ordering this item, please note in the comment area which transducer you have. Either the Garmin GT30 or GT34 transducer. It is important for us to know this please. This Transducer Shield DOES NOT fit the Garmin GT 36 or GT 56 transducer.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

$89.95

Select options
Out Of Stock

TG-TUG to fit Garmin traditional dual beam / dual frequency transducer # 010-10272-00 or 010-10249-20

TG-TUG is Ideal for Installing on a trolling motor. It can also be attached on the side of a jack plate or on the boat set back with additional components.

$139.00

Select options
In Stock

TG-GT30-3D Transducer Shield to fit Garmin DownVü/SideVü GT30 and Pod GT8HW transducers together

Available Now. Transducer Shield to fit Garmin® DownVü/SideVü GT30-TM Transducer and GT8HW-IH pod transducer in tandem on trolling motors.

$224.95

Select options

CLOSE

My Account
Search

Search for:
0