Structure Scan

Showing all 10 results

In Stock

TS-AIHD-TS fits Lowrance® ActiveImaging HD™ or FishReveal

Item # TS-AIHD-TS is designed to fit Lowrance® Active Imaging HD™ 3-in-1 Transducer # 000-16062-001 (approx. 10-1/4” long x 2” wide x 1-1/4” thick and the cable comes out from the back).

It is formatted for installation on the side of the jack plate, hole shot plate or set back. If you are interested in installing to your transom, please see our Armor Plates.

$199.00

Select options
In Stock

TS-AIHD-TS Combo fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001 on a trolling motor

^{Item # TS-AIHD-TS Combo}^{is built in High Quality Aluminum Alloy and Black Powder Coated for Trolling Motor installation. It is designed to fit Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ transducer # 000-16060-001. The transducer is approx. 10-1/4” long x 2” wide x 1-1/2″ thick and the cable comes out on top near the back.}

^{It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$225.95

Select options
In Stock

TS-DSS3-TS to fit Lowrance®Total Scan, Structure Scan 3D and HDS Live xDucer 2-in-1 or 3-in-1 on Jack Plate, Hole Shot or Transom Set Back

Choose this item for Jack Plate, Hole Shot Plate or Set Back installation to attach a Lowrance®/Simrad® Total Scan transducer # 000-12568-001 or Lowrance®/Simrad® Structure Scan 3D transducer # 000-12396-001 on a Jack Plate or Transom Set Back. This Transducer Shield will also fit the New Lowrance HDS LIVE Active Imaging 2-in-1 transducer # 000-14490-001 and 3-in-1 transducer # 000-14489-001. NOTE: this item DOES NOT fit the ActiveImageing HD 3-in-1 Transducer # 000-16062-001 or ActiveImaging HD 3-in-1 FishReveal Transducer # 000-1060-001.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.

For trolling motor installation go to TS-DSS3-TS-COMBO.
It is VERY IMPORTANT that you complete the questionnaire when ordering this product.

$189.00

Select options
In Stock

TS-DSS3-TS Combo fits Lowrance® Total Scan & Live Active Imaging 2-in-1 or 3-in-1 xDucer on a Trolling Motor

Choose this item to attach a Lowrance® Total Scan transducer # 000-12568-001 on a Trolling Motor. This Transducer Shield will fit the Lowrance Live Active Imaging transducer # 000-14490-001 or 3-IN-1 transducer # 000-14489-001 NOTE: this item DOES NOT fit the ActiveImage HD 3-in-1 # 000-16062-001 or the ActiveImage HD 3-in-1 FishReveal Transducer # 000-16060-001 It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

$215.95

Select options
In Stock Sale!

TS-DSI fits Lowrance DSI xDucer 000-10260-001 for Trolling Motor or Jack Plate install

Fits Lowrance Down Scan Skimmer transducer # 10260-001
not for use directly on transom. Please see additional accessories.
(Transducer is not included)

Original price was: $69.95.Current price is: $49.95.

Select options
In Stock

TS-LIVE-S to attach Lowrance LiveSight xDucer # 000-14458-001 on Jack Plate, Hole Shot or Transom Set Back

This item is presently on Back Order. Estimated Ship Date September 7th. If you an order is placed, it will be held on back order and shipped as soon as it becomes available. Thank you for your patience.

TS-LIVE-S to attach a Lowrance® LiveSight™ transducer # 000-14458-001 on a Jack Plate, Hole Shot Plate or Set Back.

It is very important to complete the questionnaire below in full when ordering this item.

$199.95

Select options
In Stock

TS-LSS-1 to fit Lowrance LSS1 Structure Scan xDucer on a Jack Plate & some Trolling Motors

This Transducer Shield® can be installed on a Trolling Motor that has a Built In Sonar in the cone, OR on a Jack Plate, Hole Shot Plate or Set Back. Additional components will be required.

NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
It is Very Important that you complete the questionnaire when ordering this item.

$149.00

Select options
In Stock

TS-LSS-2 fits Lowrance LSS1 Structure Scan xDucer on a Set Back or Hole Shot Plate

Fits Lowrance® LSS1 Structure Scan Transducer for Set Back or Hole Shot Plate Application.
See TS-LSS2-L to fit the new LSS2 (10″)transducer

$79.95

Select options
In Stock

TS-LSS2-3D fits Lowrance LSS2 Structure Scan & Pod xDucer together usually on a Trolling Motor

^{Transducer Shield to fit Lowrance LSS2 (10-1/4″) structure scan transducer and pod transducer in tandem on trolling motors. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$224.95

Select options
In Stock

TS-LSS2-L fits Lowrance LSS2 Structure Scan Transducer on a Jack Plate

_{Easily attaches a Lowrance® LSS2 structure scan transducer, with ADDITIONAL components to your Jack Plate or Boat Set Back.}

_{^NOTE^{: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.}}

_{It is VERY IMPORTANT that you complete the questionnaire when ordering this item.}

$169.00

Select options