bracket – Transducer Shield and Saver

Showing 1–30 of 41 results

In Stock

SBB-5 – Spring Back Bracket for Armor Plates

$79.95 – $101.85

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

$49.95

Select options
In Stock

AP-D-Vu to fit Garmin GT20

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$69.95

Select options
In Stock

AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$49.95

Select options
In Stock

AP-DS-8.4 to fit Garmin GT36, GT40 or GT56
$89.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-DS-9 to fit Garmin GT41, GT50 & GT51

This product is designed to fit Garmin® DownVü/SideVü (with Chirp) transom mount transducer model GT41, GT50 and GT51.

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate.

$79.95

Select options
In Stock

AP-DS-Vu to fit Garmin GT30 and GT34

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$69.95

Select options
In Stock

AP-AI-HD to fit Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001
$79.95

Select options
In Stock

AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom

^{For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate.}
^{Recommended as an added accessory to our SBB-5 Spring Back Bracket.}

$79.95

Select options
In Stock

AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. This Armor Plate will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001
It is very important that you complete the questionnaire in full when ordering any of our products.

$94.95

Select options
In Stock

AP-DSi to fit Lowrance DSI xDucer 000-10260-001 on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boat without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

AP-GAR-2 to Fit Garmin Dual Beam transducer

Armor Plate AP-GAR-2 to fit Garmin Dual Beam transducer. Enlarge the pictures to identify your transducer. Please answer all questions in the questionnaire.

$74.95

Select options
In Stock

AP-GT-6 to fit Garmin GT 22, GT 24, GT 52 or GT 54

For transom installation to protect your transducer from side to side and front to back impact.

Ideal for boats with flat transoms or for boats without a jack plate.

Recommended as an added accessory to our SBB-5 Spring Back Bracket.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

$69.95

Select options
In Stock

AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

$89.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-HDI-2 to fit Lowrance HDI (83/200kHz) 000-10976-001 xDucer on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$59.95

Select options
In Stock

AP-HDI-3 to fit Lowrance HDI (50/200kHz) 000-10977-001 xDucer on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket # SBB-5. Please complete the questionnaire below when ordering this product.

$74.95

Select options
In Stock

AP-HUM-2 to fit Humminbird xDucer XNT 9 HW T, XNT 9 20 T & XNT 14 20 T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms or for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

AP-HX-1 to fit Humminbird Mega SI or Solix SI Transducer on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

$89.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-LIVE-S to attach Lowrance LiveSight Transducer # 000-14458-001 on a trolling motor shaft

^{AP-LIVE-S when attached to a trolling motor shaft, the angle of the transducer can be adjusted and “Positive Locked”. Fits Lowrance® LiveSight™ transducer # 000-14458-001}

$199.95

Select options
In Stock

AP-LOW to fit Lowrance Skimmer xDucer 106-72 on a Transom

For transom installation to protect your transducer from side to side and front and back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

AP-ONIX-HDSI to fit Humminbird Onix xDucer XT 14 20 HDSI T or XT 14 20 HDSI T (RD) on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket

$84.95

Select options
In Stock

ATLAS 8″ to 12″ Jack Plate – R3 (w/ offset) – for STARBOARD or DRIVER side

L Bracket with 3 inch offset to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ or 12″ Jack Plate. Also available for the Port Side. It is very important that you complete the questionnaire when ordering this item.you

$79.95

Select options
In Stock

ATLAS 8″ to 12″ Jack Plate – L3 (w/ offset)- PORT or PASSENGER SIDE

L Bracket with 3 inch offset to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ or 12″ Jack Plate. Also available for the Port Side. It is very important that you complete the questionnaire when ordering this item.you

$79.95

Select options
In Stock

Atlas 4″ Jack Plate – L Bracket # LB-AT-4-Combo (with solid spacer)

L Bracket – Combo with Solid Spacer to attach a Transducer Shield to the side of an Atlas Hydraulic 4” Jack Plate.

It is very important that you complete the questionnaire when ordering this item.
The information you provide will help us to assist you better and avoid a delay in shipping your order.

$96.95

Select options
In Stock

ATLAS 8″ to 14″ Jack Plate : L Bracket # LB-AT-4.6.8.10.12 (without offset)

L Bracket to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ and 12″ Jack Plate. PLEASE make sure that your jack plate size and Transducer Shield is listed in the description to the left. The larger transducers require our L Bracket with an “offset” or “spacer” to keep the trim rod from hitting the transducer.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

$49.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

EXT-1.5″ Extension

Aluminum 1.5″ Extension attached to an L. Bracket and Transducer Shield to lower the level of the transducer. This item is sometimes required on Skeeter & Bass Cat boats.

$35.00

Add to cart
In Stock

EXT-3.0 Extension

Aluminum extension attached between an L Bracket and Transducer Shield will lower the transducer if turning chines or trim tabs interfere with transducer side signal

$40.00

Add to cart
In Stock

HW-Bracket to attach a Hydro Wave speaker box to a Minnkota, Motorguide or Power Pole trolling motor shaft

High Quality Aluminum Bracket to securely attach a Hydro Wave Speaker Box to a trolling motor shaft.

Please complete the questionnaire when ordering this item.

It is VERY important that we know if your trolling motor is an MINNKOTA “ULTREX”

$39.95

Select options
In Stock

Hydro Dynamics Rapid Jack

L. Adapter Bracket to fit Hydro Dynamics Rapid Jack jack plate. Used with a Transducer Shield to attach transducer to the side of the Jack Plate.

^{It is very important that you complete the questionnaire in full when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$49.95

Select options
In Stock

LB-3-RW Blank L. Bracket – STARBOARD side

L. Bracket without pre-drilled holes used on T-H Marine Manual and Pro Hi Jacker 6, 8, 10 and 12″ jack plates

$49.95

Select options

CLOSE

My Account
Search

Search for:
0