Showing 85–96 of 161 results
-
Dek-It 0.0 Fish Finder Mount
$114.95Electronics Mount Model Dek-It 0.0° suitable for mounting electronics on the bow of the boat. Dimensions 15.5” L x 5.5” W x 4”H
-
MG-GS-P1 Grass Shredder Plate to fit Motorguide® trolling motors
$34.95Cut through the grass and weeds when fishing in grassy areas. Stainless Steel and Black Powder Coated. Pictures are shown unpainted for easy viewing.
Customer Comment: I want to let you know how much I love my newly purchased Grass Shredder for my MinnKota Fortrex. I installed it as per the instructions and headed out to the Potomac River for a two day club tourney. The Shredder was awesome in all that grass and helped save my batteries. I did not once have to stop and clean the grass off of my trolling motor. To top it all off, I won the event with 10 bass for 23.88 lbs. and caught the biggest Snakehead of my fishing career. The buff was a pleasant surprise and greatly appreciated as I have had 12 skin cancers removed from my head and neck over the years…Thank you, thank you!
-
MK-GS-P2 Grass Shredder Plate to fit Minnkota 36v 112lb Trolling Motor
$34.95Cut through the grass and weeds when fishing in grassy areas. Stainless Steel and Black Powder Coated. Pictures are shown unpainted for easy viewing.
Customer Comment: I want to let you know how much I love my newly purchased Grass Shredder for my MinnKota Fortrex. I installed it as per the instructions and headed out to the Potomac River for a two day club tourney. The Shredder was awesome in all that grass and helped save my batteries. I did not once have to stop and clean the grass off of my trolling motor. To top it all off, I won the event with 10 bass for 23.88 lbs. and caught the biggest Snakehead of my fishing career. The buff was a pleasant surprise and greatly appreciated as I have had 12 skin cancers removed from my head and neck over the years…Thank you, thank you!
-
MK-GS-P1 Grass Shredder Plate to fit Minnkota 24v 74lb up to 36v 101lb trolling motors
$34.95Cut through the grass and weeds when fishing in grassy areas. Stainless Steel and Black Powder Coated. Pictures are shown unpainted for easy viewing.
Customer Comment: I want to let you know how much I love my newly purchased Grass Shredder for my MinnKota Fortrex. I installed it as per the instructions and headed out to the Potomac River for a two day club tourney. The Shredder was awesome in all that grass and helped save my batteries. I did not once have to stop and clean the grass off of my trolling motor. To top it all off, I won the event with 10 bass for 23.88 lbs. and caught the biggest Snakehead of my fishing career. The buff was a pleasant surprise and greatly appreciated as I have had 12 skin cancers removed from my head and neck over the years…Thank you, thank you!
-
AP-GAR-2 to Fit Garmin Dual Beam transducer
$74.95Armor Plate AP-GAR-2 to fit Garmin Dual Beam transducer. Enlarge the pictures to identify your transducer. Please answer all questions in the questionnaire.
-
B-4 Base Plate
$19.95This 1/4″ x 4″ black polyethylene round base creates a barrier between the carpet & metal ram mount base on the bow (front deck) of the boat.
-
B-3 Base Plate
$15.95This 1/4″ x 3″ round black polyethylene base creates a barrier between the carpet & metal ram mount base on the bow (front deck) of the boat.
-
AP-GT-6 to fit Garmin GT 22, GT 24, GT 52 or GT 54
$69.95For transom installation to protect your transducer from side to side and front to back impact.
Ideal for boats with flat transoms or for boats without a jack plate.
Recommended as an added accessory to our SBB-5 Spring Back Bracket.
It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.
-
TG-GT-6 to fit Garmin GT22, GT24, GT52 or GT54
$109.95Choose this item to attach a Garmin® Transducers GT 22, GT 24, GT52 or GT54 on a Trolling Motor, Jack Plate or Transom Set Back. This Transducer Shield will not fit the new Garmin GT 36 or GT56 transducer.
NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.
-
AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom
$79.95For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate.
Recommended as an added accessory to our SBB-5 Spring Back Bracket. -
TS-DSS3-TS to fit Lowrance®Total Scan, Structure Scan 3D and HDS Live xDucer 2-in-1 or 3-in-1 on Jack Plate, Hole Shot or Transom Set Back
$189.00Choose this item for Jack Plate, Hole Shot Plate or Set Back installation to attach a Lowrance®/Simrad® Total Scan transducer # 000-12568-001 or Lowrance®/Simrad® Structure Scan 3D transducer # 000-12396-001 on a Jack Plate or Transom Set Back. This Transducer Shield will also fit the New Lowrance HDS LIVE Active Imaging 2-in-1 transducer # 000-14490-001 and 3-in-1 transducer # 000-14489-001. NOTE: this item DOES NOT fit the ActiveImageing HD 3-in-1 Transducer # 000-16062-001 or ActiveImaging HD 3-in-1 FishReveal Transducer # 000-1060-001.
NOTE: When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water. For bottom reading on plane, a transducer inside the hull will be required.
For trolling motor installation go to TS-DSS3-TS-COMBO.
It is VERY IMPORTANT that you complete the questionnaire when ordering this product. -
TS-DSS3-TS Combo fits Lowrance® Total Scan & Live Active Imaging 2-in-1 or 3-in-1 xDucer on a Trolling Motor
$215.95Choose this item to attach a Lowrance® Total Scan transducer # 000-12568-001 on a Trolling Motor. This Transducer Shield will fit the Lowrance Live Active Imaging transducer # 000-14490-001 or 3-IN-1 transducer # 000-14489-001 NOTE: this item DOES NOT fit the ActiveImage HD 3-in-1 # 000-16062-001 or the ActiveImage HD 3-in-1 FishReveal Transducer # 000-16060-001 It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.
