SBB-5 – Spring Back Bracket for Armor Plates

Description

^{Maximize your equipment’s durability and performance with the Spring Back Bracket!}

^{Product #SBB-5}

This unique bracket is one of a kind and specially engineered to keep your transducers safe from debris and damage.

Whether you’re using your factory mount or one of our premium and highly durable Armor Plates, this bracket will absorb the shock of impact from debris while moving through the water.

The double loaded springs allow the transducer to pivot up and around debris as needed, then back down to its original position and fish finder ready.

^{Features and Benefits:}

<sup>* Safeguard and improve the life expectancy of the transducer arm / knuckle.
* The top bracket is drilled to accept a variety of transducer factory mounting hardware.
* The bottom bracket has a selection of slots and holes to fine tune the transducer position and finally lock down.</sup>

*^{The Spring Back Bracket® is built in Stainless Steel and includes all stainless hardware and instructions.  Dimensions: Depth 1” x Height 2.5” x Width 3”.}

<sup>Optional Accessories:
* Axle Assembling Tool is a highly recommended very helpful driver tool with a threaded end to remove and install the axle rod in the Spring Back Bracket.  Click on choose option to order this item.  If you choose not to purchase this optional tool, a #2 Phillips screwdriver can be used to push the axle through the bracket.</sup>

^{* Stainless Steel Back Plate is a must have for hard to reach / tight to work in areas.  It can be used if a minimum clearance of 3-1/2” on one side and 6-1/2” on the other side of the Spring Back Bracket cannot be achieved.  Using this item will make your life so much easier to have everything assembled on the workbench or holding in a vice and then simply attaching the assembly onto the boat surface.}

                    Proudly Designed and Patented in the USA