Showing all 16 results

  • "The Wedge" - Trolling Motor Shallow Water Bracket
    In Stock

    “The Wedge” – Trolling Motor Shallow Water Bracket

    Let’s Fish Shallow with “The Wedge”.  No more holding the trolling motor rope to fish shallow.
    Simply place “The Wedge” beneath the trolling motor bracket and GO SHALLOW.
    Available to fit Garmin Force, Lowrance Ghost, Minnkota Ultrex and Fortrex or Motorguide Pro Tour.

    $114.95 – $134.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • Aluminum Skeg to fit Garmin Force Trolling Motor
    AL-Skeg-Garmin
    In Stock

    Aluminum Skeg to fit Garmin Force Trolling Motor

    AL-Skeg-Garmin  1/4″ Aircraft Aluminum Alloy, CNC Machined, Welded and Black Powder Coated.
    “Aluminum vs Plastic” – Which one would you choose?
    *  Retrofit the plastic skeg with our Aluminum Skeg.
    *  Our Aluminum Skeg will also fit the optional Garmin Nose Cone with no built in sonar.
    *  Read more features and benefits  …..

     

    $89.95
    Add to cart
  • AP-D-Vu to fit Garmin GT20
    AP-D-DU
    In Stock

    AP-D-Vu to fit Garmin GT20

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $69.95
    Select options
  • AP-DS-9 to fit Garmin GT41, GT50 & GT51
    AP-DS-9
    In Stock

    AP-DS-9 to fit Garmin GT41, GT50 & GT51

    This product is designed to fit Garmin® DownVü/SideVü (with Chirp) transom mount transducer model GT41, GT50 and GT51.

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.

    $79.95
    Select options
  • AP-DS-Vu to fit Garmin GT30 and GT34
    AP-DS-VU
    In Stock

    AP-DS-Vu to fit Garmin GT30 and GT34

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $69.95
    Select options
  • AP-GAR-2 to Fit Garmin Dual Beam transducer
    AP-GAR-2
    In Stock

    AP-GAR-2 to Fit Garmin Dual Beam transducer

    Armor Plate AP-GAR-2 to fit Garmin Dual Beam transducer.  Enlarge the pictures to identify your transducer.  Please answer all questions in the questionnaire.

    $74.95
    Select options
  • AP-GT-6 Armor Plate to fit Garmin GT22, GT24, GT52 or GT54
    Picture shows Garmin Transducer and AP-GT-6 Armor Plate (transducer is not included)
    In Stock

    AP-GT-6 to fit Garmin GT 22, GT 24, GT 52 or GT 54

    For transom installation to protect your transducer from side to side and front to back impact.

    Ideal for boats with flat transoms or for boats without a jack plate.

    Recommended as an added accessory to our SBB-5 Spring Back Bracket. 

    It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

     

    $69.95
    Select options
  • EXT-2.O" Extension
    EXT-2.O" Extension
    In Stock

    EXT-2.O” Extension

    An extension between an L Bracket & Transducer Shield to lower the transducer so as to avoid side viewing signal interference with hull turning chines.

    $35.00
    Add to cart
  • EXT-1.5" Extension
    EXT-1.5
    In Stock

    EXT-1.5″ Extension

    Aluminum 1.5″ Extension attached to an L. Bracket and Transducer Shield to lower the level of the transducer. This item is sometimes required on Skeeter & Bass Cat boats.

    $35.00
    Add to cart
  • EXT-3.0 Extension
    Picture shows an L Bracket + Extension + Transducer Shield
    In Stock

    EXT-3.0 Extension

    Aluminum extension attached between an L Bracket and Transducer Shield will lower the transducer if turning chines or trim tabs interfere with transducer side signal

    $40.00
    Add to cart
  • TG-HG-8.5
    Picture shows Transducer Shield + Garmin Transducer (not included)
    In Stock

    TG-HG-8.5 Transducer Shield to fit Garmin GT 56 or GT 36

    TG-HG-8.5 Transducer Shield ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back.  Additional components will be required.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane.  For bottom reading on plane, a transducer inside the hull will be required.

     

    $159.00
    Select options
  • LB-CMC-5/5-8 to fit 5.5 to 8" CMC Jack Plate
    CMC L Bracket
    In Stock

    LB-CMC-5/5-8 to fit 5.5 to 8″ CMC Jack Plate

    L Bracket to attach a Transducer Shield to the side of a CMC jack plate.

    It is very important that you complete the questionnaire when ordering this item. 
    The information you provide will help us to assist you better and avoid a delay in shipping your order.

    $64.95
    Select options
  • LWG-2 Wedge for Hole Shot or Set Back install
    In Stock

    LWG-2 Wedge for Hole Shot or Set Back install

    LWG-2 wedge along with a Transducer Shield will put the transducer at the correct angle when the boat is in the water, when installed on a boat set back/step or Jack Plate hole shot plate.

    $19.95
    Select options
  • Transducer Shield # TG-DS-Vu
    TG-DS-VU + Transducer (not included)
    In Stock

    TG-DS-Vu to fit Garmin GT30 and GT34

    This item is user friendly for various installation options – * Trolling Motor * Side of the Jack Plate * Hole Shot Plate or * Set Back Additional components are required.
    When ordering this item, please note in the comment area which transducer you have. Either the Garmin GT30 or GT34 transducer.  It is important for us to know this please. This Transducer Shield DOES NOT fit the Garmin GT 36 or GT 56 transducer.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $89.95
    Select options
  • TS-LSS2-2L fits Lowrance LSS2 Structure Scan Transducer on a Set Back or Hole Shot Plate
    TS-LSS2-2L to fit LSS2 structure scan transducer
    In Stock

    TS-LSS2-2L fits Lowrance LSS2 Structure Scan Transducer on a Set Back or Hole Shot Plate

    Fits Lowrance LSS2 structure scan 10-1/4″ transducer for installation on SetBack/Step OR Hole Shot/Baffle plates.
    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.
    It is very important that you complete the questionnaire when ordering this item.

    $99.95
    Select options
  • WG-1 Wedge to attach a Transducer Shield to a Set Back or Hole Shot Plate
    TM-Csi
    In Stock

    WG-1 Wedge to attach a Transducer Shield to a Set Back or Hole Shot Plate

    WG-1 Wedge along with a Transducer Shield will put the Transducer at the correct angle when the boat is in the water when installed on a Boat Set Back or Jack Plate hole shot/baffle plate

    $14.95
    Select options