Showing 1–30 of 50 results
-
-
“The Wedge” – Trolling Motor Shallow Water Bracket
$114.95 – $134.95Let’s Fish Shallow with “The Wedge”. No more holding the trolling motor rope to fish shallow.
Simply place “The Wedge” beneath the trolling motor bracket and GO SHALLOW.
Available to fit Garmin Force, Lowrance Ghost, Minnkota Ultrex and Fortrex or Motorguide Pro Tour. -
HDTS-B stainless black powder coated Transducer Strap
$5.95Heavy duty stainless steel black powder coated straps available in three different sizes. Used to attach the Transducer Shield to a trolling motor. Click on Strap Length to choose the correct size strap for your trolling motor.
-
360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex
$149.00Item # 360 Stabilizer to stabilize the Humminbird® 360 Imaging on a Minnkota® Ultrex trolling motor. It is built in 5/16 aluminum alloy and black powder coated. The total length is 15-1/2″ and attaches to the existing Humminbird® 360 Imaging bracket on a Minnkota® Ultrex Trolling Motor.
The purpose of our 360 Stabilizer is to: (1) reduce vibration of the Humminbird® 360 when the boat is up on plane and going through rough conditions (2) reduce the chance of breaking the Humminbird® 360 shaft when the transducer comes in contact with underwater obstruction (3) adds support to the Humminbird® 360 shaft and reduces flexing (4) reduces vibration to the 360 transducer when the trolling motor is deployed in the water and in trolling mode, and (5) enhances the structure definition on the fish finder.
Simple installation: attach our 360 Stabilizer base bracket to the existing holes in the Humminbird® 360 mounting bracket and clamp the end of the 360 Stabilizer to the Humminbird® 360 shaft.
-
360 Humminbird – Fortrex Bracket to Ultrex # 360-S-CAB-ULT
$299.00360-S-CAB-ULT: Conversion Adapter Bracket will allow you to fit the original Humminbird 360 “S Shape bracket to a MinnkotaUltrex trolling motor.
-
360 Humminbird – Without a bracket to Ultrex # 360-F-CAB-ULT
$399.00360-F-CAB-ULT : Conversion Adapter Bracket will allow you to fit a Humminbird 360 without a bracket or a removable universal bracket to a Minnkota Ultrex trolling motor.
-
360 Humminbird to a Motorguide Tour 2″ Outer Shaft # 360-S-CAB-MG
$285.00360-S-CAB-MG: Conversion Adapter Bracket will allow you to fit the original Humminbird 360 “S” Shape bracket to the 2″ outer shaft on a Motorguide Tour or Tour Pro trolling motor.
-
Aluminum Skeg to fit Garmin Force Trolling Motor
$89.95AL-Skeg-Garmin 1/4″ Aircraft Aluminum Alloy, CNC Machined, Welded and Black Powder Coated.
“Aluminum vs Plastic” – Which one would you choose?
* Retrofit the plastic skeg with our Aluminum Skeg.
* Our Aluminum Skeg will also fit the optional Garmin Nose Cone with no built in sonar.
* Read more features and benefits ….. -
B-3 Base Plate
$15.95This 1/4″ x 3″ round black polyethylene base creates a barrier between the carpet & metal ram mount base on the bow (front deck) of the boat.
-
B-3-CM Base Plate with cable management
$24.95This 3/4″ black polyethylene 3″ round base with built-in cable management creates a barrier between the fiberglass & metal ram mount base.
-
B-4 Base Plate
$19.95This 1/4″ x 4″ black polyethylene round base creates a barrier between the carpet & metal ram mount base on the bow (front deck) of the boat.
-
B-4-CM Base Plate with cable management
$29.95ITEM # B-4-CM This 3/4″ black polyethylene round base, with built-in cable management, creates a barrier between the fiberglass & metal ram mount base.
-
B-4-CM-MAX Base Plate with cable management
$34.95This 4″ X 1″ black polyethylene round base with built-in cable management creates a barrier between the fiberglass & metal ram mount base.
-
B-SQUARE-CM with Cable Management
$29.95Item # B-SQUARE-CM This 3.5″ x 3.5″ x 3/4″ black polyethylene base with built-in-cable management creates a barrier between the fiberglass and metal electronic mount base.
-
Buzz Bar / Wire Terminals
$24.95 – $25.95Buzz Bar / Wire terminal to connect wires at the end of the dedicated line for depth finders.
-
Cable Guiding Tower great for iPilot and xi5 series trolling motors
$98.95Item # MK-Cable Guiding Tower. This kit is ideal for trolling motors with “External Wiring” for example Minnkota Ulterra, Terrova, Power Drive and Motorguide xi5 series.
-
EXT-2.O” Extension
$35.00An extension between an L Bracket & Transducer Shield to lower the transducer so as to avoid side viewing signal interference with hull turning chines.
-
Lift Assist Booster # L A B (trolling motor lift assist)
$299.95 – $439.95Item # L A B (Lift Assist Booster) This product will make deploying and retrieving your trolling motor so much easier.
Please type in the required information
in the boxes below.By choosing the Riser Kit option, it will increase the price of the Lift
Assist Booster by $99.95 -
D-111-C Combo – Ram Mount including B-4-CM base plate with cable management
$149.95Ram Mount for larger Lowrance and Humminbird units. Features an 11″ x 3″ mounting plate with a 2 1/4″ ball and 3-1/2″ base. Includes 4″ Round Base Plate Item # B-4-CM and s.steel mounting hardware.
-
D-111-C Ram Mount
$125.95Ram Mount for larger Lowrance, Eagle and Humminbird units. Features an 11″ x 3″ base plate,2 1/4″ ball & 3-1/2″ base. Includes s.steel mounting hardware.
-
Dek-It 0.0 Fish Finder Mount
$114.95Electronics Mount Model Dek-It 0.0° suitable for mounting electronics on the bow of the boat. Dimensions 15.5” L x 5.5” W x 4”H
-
Dek-It 22.5° Fish Finder Mount
$125.95Electronics Mount Model Dek-It 22.5° suitable for mounting electronics on the bow of the boat.
Dimensions 15.5” L x 5.5” W x 4.5”H -
Do’Nut Trolling Motor Rod Support
$14.95Trolling Motor Support Rod DO’NUT fits Minnkota Trolling Motors
1/2″ Black Polyethylene Marine Board x 2-1/4 Diameter and attaches to the deck with three (3) # 8 x 1″ stainless steel phillips pan head screws which are included in the package.
-
EXT-1.5″ Extension
$35.00Aluminum 1.5″ Extension attached to an L. Bracket and Transducer Shield to lower the level of the transducer. This item is sometimes required on Skeeter & Bass Cat boats.
-
EXT-3.0 Extension
$40.00Aluminum extension attached between an L Bracket and Transducer Shield will lower the transducer if turning chines or trim tabs interfere with transducer side signal
-
Grass Off Deflector Rod to fit Minnkota & Motorguide 24v and 36v trolling motors
$49.95Eliminate and reduce the accumulation of vegetation on top of trolling motor. Suitable for Motorguide 24v, 36v and Minnkota 24v, 36v 101 and 112 trolling motors. It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.
-
Humminbird XP 9 20 T Puck Transducer
$79.95Humminbird In Hull Puck Transducer XP 9 20 T
*Easy Glue-in installation inside single layer fiberglass hulls* includes Epoxy Kit and 20′ cable
-
Humminbird Y Cable # 9 M SIDBY # 720101-1 for Mega and all Side Image except Solix
$39.95Humminbird Y Cable allows split signal operation of Humminbird Side Imaging and dual beam transducers.
-
Humminbird Y Cable # 14 M SI DBY for Solix Units
$74.95Humminbird Y Cable used to connect a 2D transducer to a Solix unit.
