Showing all 22 results

  • Find Your Shield
    In StockNew!

    Find Your Shield

    For all HUMMINBIRD Shields click HERE

    For all LOWRANCE Shields click HERE

    For All GARMIN Shields click HERE

    View products
  • Aluminum Skeg to fit Garmin Force Trolling Motor
    AL-Skeg-Garmin
    In Stock

    Aluminum Skeg to fit Garmin Force Trolling Motor

    AL-Skeg-Garmin  1/4″ Aircraft Aluminum Alloy, CNC Machined, Welded and Black Powder Coated.
    “Aluminum vs Plastic” – Which one would you choose?
    *  Retrofit the plastic skeg with our Aluminum Skeg.
    *  Our Aluminum Skeg will also fit the optional Garmin Nose Cone with no built in sonar.
    *  Read more features and benefits  …..

     

    $89.95
    Add to cart
  • AP-D-Vu to fit Garmin GT20
    AP-D-DU
    In Stock

    AP-D-Vu to fit Garmin GT20

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $69.95
    Select options
  • AP-DS-8.4 to fit Garmin GT36, GT40 or GT56
    Picture shows Armor Plate # AP-DS-8.4 to fit Garmin GT36 or GT56 transducer
    In Stock

    AP-DS-8.4 to fit Garmin GT36, GT40 or GT56

    $89.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • AP-DS-9 to fit Garmin GT41, GT50 & GT51
    AP-DS-9
    In Stock

    AP-DS-9 to fit Garmin GT41, GT50 & GT51

    This product is designed to fit Garmin® DownVü/SideVü (with Chirp) transom mount transducer model GT41, GT50 and GT51.

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.

    $79.95
    Select options
  • AP-DS-Vu to fit Garmin GT30 and GT34
    AP-DS-VU
    In Stock

    AP-DS-Vu to fit Garmin GT30 and GT34

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $69.95
    Select options
  • AP-GAR-2 to Fit Garmin Dual Beam transducer
    AP-GAR-2
    In Stock

    AP-GAR-2 to Fit Garmin Dual Beam transducer

    Armor Plate AP-GAR-2 to fit Garmin Dual Beam transducer.  Enlarge the pictures to identify your transducer.  Please answer all questions in the questionnaire.

    $74.95
    Select options
  • AP-GT-6 Armor Plate to fit Garmin GT22, GT24, GT52 or GT54
    Picture shows Garmin Transducer and AP-GT-6 Armor Plate (transducer is not included)
    In Stock

    AP-GT-6 to fit Garmin GT 22, GT 24, GT 52 or GT 54

    For transom installation to protect your transducer from side to side and front to back impact.

    Ideal for boats with flat transoms or for boats without a jack plate.

    Recommended as an added accessory to our SBB-5 Spring Back Bracket. 

    It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

     

    $69.95
    Select options
  • TG-DS-8.4 fits Garmin GT40
    TG-DS-8.4 shows Garmin Transducer GT40 for transducer reference
    In Stock

    TG-DS-8.4 fits Garmin GT40

    TG-DS-8.4 Transducer Shield is ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back.  Additional components will be required.  NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane.  For bottom reading on plane, a transducer inside the hull will be required.  It is very important that you complete the questionnaire when ordering this item.

    $139.95
    Select options
  • FFS Elite to attach a Lowrance Active Target or Garmin LVS 32, 34 or 62 on a Trolling Motor shaft
    FFS Elite to attach a Lowrance Active Target or Garmin LVS 32, 34 or 62 on a Trolling Motor shaft
    In Stock

    FFS ELITE to attach a Forward Facing Sonar on a Trolling Motor Shaft

    $299.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • TG-HG-8.5
    Picture shows Transducer Shield + Garmin Transducer (not included)
    In Stock

    TG-HG-8.5 Transducer Shield to fit Garmin GT 56 or GT 36

    TG-HG-8.5 Transducer Shield ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back.  Additional components will be required.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane.  For bottom reading on plane, a transducer inside the hull will be required.

     

    $159.00
    Select options
  • Transducer Shield # TG-GT-6
    TG-GT-6 shown with Garmin Transducer (not included)
    In Stock

    TG-GT-6 to fit Garmin GT22, GT24, GT52 or GT54

    Choose this item to attach a Garmin® Transducers GT 22, GT 24, GT52 or GT54 on a Trolling Motor, Jack Plate or Transom Set Back.  This Transducer Shield will not fit the new Garmin GT 36 or GT56 transducer.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    It is VERY IMPORTANT that you complete the questionnaire below in full when ordering this item.

    $109.95
    Select options
  • LWG-2 Wedge for Hole Shot or Set Back install
    In Stock

    LWG-2 Wedge for Hole Shot or Set Back install

    LWG-2 wedge along with a Transducer Shield will put the transducer at the correct angle when the boat is in the water, when installed on a boat set back/step or Jack Plate hole shot plate.

    $19.95
    Select options
  • LWG-3 Wedge for Hole Shot or Set Back install
    In Stock

    LWG-3 Wedge for Hole Shot or Set Back install

    LWG-3 wedge along with a Transducer Shield will put the transducer at the correct angle when the boat is in the water, when installed on a boat set back/step or Hole Shot Plate under a Jack Plate.

    $24.95
    Select options
  • TG-D-Vü fits Garmin GT20
    Picture shows Garmin Down Vü Transducer to fit TG-D-Vu
    In Stock

    TG-D-Vü fits Garmin GT20

    To fit Garmin HD ID Down Vu (8 pin) transducer number 010-12087-001 (GT20-TM)

    $89.95
    Select options
  • TG-DS-9 fits Garmin GT21, GT23, GT41, GT50 and GT51
    Picture shows Transducer Shield TG-DS-9 and Garmin Transducer (not included)
    In Stock

    TG-DS-9 fits Garmin GT21, GT23, GT41, GT50 and GT51

    Ideal for Installing on a trolling motor, on the side of a jack plate or on the boat set back.  Additional components will be required.  This Transducer Shield will not fit the new Garmin GT 36 or GT 56 transducer. 

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    It is very important that you complete the questionnaire when ordering this item.

    $149.95
    Select options
  • Transducer Shield # TG-DS-Vu
    TG-DS-VU + Transducer (not included)
    In Stock

    TG-DS-Vu to fit Garmin GT30 and GT34

    This item is user friendly for various installation options – * Trolling Motor * Side of the Jack Plate * Hole Shot Plate or * Set Back Additional components are required.
    When ordering this item, please note in the comment area which transducer you have. Either the Garmin GT30 or GT34 transducer.  It is important for us to know this please. This Transducer Shield DOES NOT fit the Garmin GT 36 or GT 56 transducer.

    NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

    $89.95
    Select options
  • TG-TUG to fit Garmin traditional dual beam / dual frequency transducer # 010-10272-00 or 010-10249-20
    Transducer Shield to fit Garmin dual beam 4 pin transducer
    Out Of Stock

    TG-TUG to fit Garmin traditional dual beam / dual frequency transducer # 010-10272-00 or 010-10249-20

    TG-TUG is Ideal for Installing on a trolling motor.  It can also be attached on the side of a jack plate or on the boat set back with additional components.

    $139.00
    Select options
  • Transducer Shield TG-GT30-3D to attach two Garmin transducers
    TG-GT-6 shown with Garmin Transducer (not included)
    In Stock

    TG-GT30-3D Transducer Shield to fit Garmin DownVü/SideVü GT30 and Pod GT8HW transducers together

    Available Now.  Transducer Shield to fit Garmin® DownVü/SideVü GT30-TM Transducer and GT8HW-IH pod transducer in tandem on trolling motors.

    $224.95
    Select options
  • Perspective Mode L Bracket - Garmin Panoptix LiveScope LVS34 transducer on trolling motor shaft or any shaft
    Picture shows Garmin bracket, Perspective L Bracket and Hardware
    In Stock

    Perspective Mode L Bracket – Garmin Panoptix LiveScope LVS34 transducer on trolling motor shaft or any shaft

    Perspective Mode L Bracket Mount used to adjust the position of your Garmin Panoptix LiveScope LVS34 transducer on a trolling motor shaft or any shaft.  This item is used along with your Garmin transducer mounting bracket.

    $39.95
    Add to cart
  • Ram Rail Kit includes two stainless straps, Rail and Skeg replacement
    Ram Rail Kit includes two stainless straps, Rail and Skeg replacement
    In Stock

    Ram Rail Kit for small Minnkota Trolling Motors

    The Ram Rail Kit  includes Skeg, 2 stainless steel straps & hardware. The kit can only be installed on a MinnKota trolling motor that has the Prop & Skeg on opposite ends and when the transducer to be attached is too long for the space between the propeller and skeg.

    A transducer cannot be attached directly to the Ram Rail Kit and must be purchased along with a specific Transducer Shield to suit your transducer.  After purchasing the Ram Rail Kit, click on “Shields” and choose the Transducer Shield to suit your transducer.

    This product can be used with most Humminbird, Garmin & Lowrance Transducer Shields made by Transducer Shield and Saver.

    Proudly designed and built in USA

    $150.00
    Select options
  • WG-LSS2 to fit Humminbird TM-HX-3, TM-H8.3 or Garmin TG-HG-8.5 Transducer Shield on Set Back or Hole Shot Plate (10-12" jack plates only)
    Wedge for LSS2
    In Stock

    WG-LSS2 to fit Humminbird TM-HX-3, TM-H8.3 or Garmin TG-HG-8.5 Transducer Shield on Set Back or Hole Shot Plate (10-12″ jack plates only)

    Wedge used when attaching a Humminbird®  TM-HX-3 or TM-H8.3 Transducer Shield on a boat Set-Back OR on a Hole Shot Plate under a jack plate.  This Wedge CANNOT be used on a 90 ° degree Jack Plate.

    $47.00
    Select options