Armor Plates – Transducer Shield and Saver

Showing 1–30 of 36 results

In Stock

AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

$49.95

Select options
In Stock

AP-D-Vu to fit Garmin GT20

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$69.95

Select options
In Stock

AP-DI to fit a Humminbird Down Image xDucer XNT 9 DI T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$49.95

Select options
In Stock

AP-DS-8.4 to fit Garmin GT36, GT40 or GT56
$89.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-DS-9 to fit Garmin GT41, GT50 & GT51

This product is designed to fit Garmin® DownVü/SideVü (with Chirp) transom mount transducer model GT41, GT50 and GT51.

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate.

$79.95

Select options
In Stock

AP-DS-Vu to fit Garmin GT30 and GT34

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$69.95

Select options
In Stock

AP-AI-HD for Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001

Protect your transducer with our high quality, powder coted aluminum alloy ARMOR PLATE. This plate is designed to replace your factory mount, providing superior all around impact protection while installed to your transom.

$79.95

Add to cart
In Stock

AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom

^{For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate.}
^{Recommended as an added accessory to our SBB-5 Spring Back Bracket.}

$79.95

Select options
In Stock

AP-SP-SH Armor Plate to fit Lowrance® Hook 2 Split Shot Transducer & Eagle Splitshot HD

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.
It is very important that you complete the questionnaire in full when ordering any of our products.

$79.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. This Armor Plate will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001
It is very important that you complete the questionnaire in full when ordering any of our products.

$94.95

Select options
In Stock

AP-DSi to fit Lowrance DSI xDucer 000-10260-001 on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boat without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

AP-GAR-2 to Fit Garmin Dual Beam transducer

Armor Plate AP-GAR-2 to fit Garmin Dual Beam transducer. Enlarge the pictures to identify your transducer. Please answer all questions in the questionnaire.

$74.95

Select options
In Stock

AP-GT-6 to fit Garmin GT 22, GT 24, GT 52 or GT 54

For transom installation to protect your transducer from side to side and front to back impact.

Ideal for boats with flat transoms or for boats without a jack plate.

Recommended as an added accessory to our SBB-5 Spring Back Bracket.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

$69.95

Select options
In Stock

AP-H-7.1 to fit Humminbird Helix Mega DI + Dual Spectrum Chirp Transducer # XM 9 HW MDI T or XM 14 HW CMSI T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

$84.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

$89.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-HDI-2 to fit Lowrance HDI (83/200kHz) 000-10976-001 xDucer on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

$59.95

Select options
In Stock

AP-HDI-3 to fit Lowrance HDI (50/200kHz) 000-10977-001 xDucer on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket # SBB-5. Please complete the questionnaire below when ordering this product.

$74.95

Select options
In Stock

AP-HUM-2 to fit Humminbird xDucer XNT 9 HW T, XNT 9 20 T & XNT 14 20 T on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms or for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
In Stock

AP-HX-1 to fit Humminbird Mega SI or Solix SI Transducer on a Transom

For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

$89.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

AP-LIVE-S to attach Lowrance LiveSight Transducer # 000-14458-001 on a trolling motor shaft

^{AP-LIVE-S when attached to a trolling motor shaft, the angle of the transducer can be adjusted and “Positive Locked”. Fits Lowrance® LiveSight™ transducer # 000-14458-001}

$199.95

Select options
In Stock

AP-LOW to fit Lowrance Skimmer xDucer 106-72 on a Transom

For transom installation to protect your transducer from side to side and front and back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket.

$49.95

Select options
On backorder

FISH SNIFF FIBER POLE

Introducing the “FISH SNIFF FIBER POLE” featuring our Innovative Hand Operated Stainless Steel Flexible Drive System! The FSFP can easily be attached to the MinnKota Ultrex, Lowrance Ghost, MotorGuide Tour/Tour Pro or Garmin Force trolling motor with our Receiver Ring Bracket System. This allows you to OPERATE & POSITION the Garmin Panoptix, Lowrance Active Target or Humminbird Mega Live.

Price range: $399.00 through $498.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

Full Receiver Ring Garmin Force Trolling Motor

The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.

The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.

Check out the additional T S & S product accessories available to attach to our Receiver Ring system:

* ACC-RR-360 is designed for the Humminbird 360

* ACC-TL is designed for the Humminbird TargetLock

* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”

* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5

The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts

Proudly Designed and Built in Alabama USA

See More Fish ………. Catch More Fish

$199.00

Add to cart
In Stock

Full Receiver Ring Lowrance Ghost Trolling Motor

^{The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.}

^{The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.}

^{Check out the additional T S & S product accessories available to attach to our Receiver Ring system:}

^{* ACC-RR-360 is designed for the Humminbird 360}

^{* ACC-TL is designed for the Humminbird TargetLock}

^{* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”}

^{* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5}

^{The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts}

Proudly Designed and Built in Alabama USA

See More Fish ………. Catch More Fish

$199.00

Add to cart
In Stock

Full Receiver Ring Minnkota Ultrex Trolling Motor

^{The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.}

^{The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.}

^{Check out the additional T S & S product accessories available to attach to our Receiver Ring system:}

^{* ACC-RR-360 is designed for the Humminbird 360}

^{* ACC-TL is designed for the Humminbird TargetLock}

^{* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”}

^{* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5}

^{The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts}

Proudly Designed and Built in Alabama USA

See More Fish ………. Catch More Fish

$199.00

Add to cart
On backorder

Humminbird 360 Accessory

Item # ACC-RR-360 is an accessory designed to attach a Humminbird 360 to a Trolling Motor using our Mini Receiver Ring or Full Receiver Ring.

Both the ACC-RR-360 and Receiver Ring system are built in 6061 x 3/4″ aircraft aluminum alloy, black powder coated and includes all stainless steel hardware and easy installation instructions.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

Price range: $418.00 through $448.00

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

HW-BRACKET-3 to attach a Hydro Wave Speaker Box to a Garmin Force, Minnkota Quest or Power Pole Move trolling motor shaft

High Quality Aluminum Bracket to securely attach a Hydro Wave Speaker Box to a Garmin Force, Minnkota Quest or Power Pole Move trolling motor shaft.

$39.95

Add to cart
In Stock

Mini Receiver Ring Garmin Force Trolling Motor

^{The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.}

^{The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.}

^{Check out the additional T S & S product accessories available to attach to our Receiver Ring system:}

^{* ACC-RR-360 is designed for the Humminbird 360}

^{* ACC-TL is designed for the Humminbird TargetLock}

^{* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”}

^{* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5}

^{The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts}

Proudly Designed and Built in Alabama USA

See More Fish ………. Catch More Fish

$169.00

Add to cart
On backorder

Mini Receiver Ring Lowrance Ghost Trolling Motor

^{The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.}

^{The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.}

^{Check out the additional T S & S product accessories available to attach to our Receiver Ring system:}

^{* ACC-RR-360 is designed for the Humminbird 360}

^{* ACC-TL is designed for the Humminbird TargetLock}

^{* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”}

^{* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5}

^{The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts}

Proudly Designed and Built in Alabama USA

See More Fish ………. Catch More Fish

$169.00

Add to cart

CLOSE

My Account
Search

Search for:
0