Shop Category

Showing 25–36 of 145 results

Out Of Stock

B-SQUARE-CM with Cable Management

Item # B-SQUARE-CM This 3.5″ x 3.5″ x 3/4″ black polyethylene base with built-in-cable management creates a barrier between the fiberglass and metal electronic mount base.

$29.95

Read more
In Stock

WC 2.5″ x 2.75″ x 0.5″ cable management cover

^Black^{polyethylene marine board and is 2-1/2″ x 2-3/4″ x 1/2″ thick and includes stainless steel screws..}

$19.95

Add to cart
In Stock

Rated 5.00 out of 5 based on 3 customer ratings
TS-AIHD-TS fits Lowrance® ActiveImaging HD™ or FishReveal

Item # TS-AIHD-TS is designed to fit Lowrance® Active Imaging HD™ 3-in-1 Transducer # 000-16062-001 (approx. 10-1/4” long x 2” wide x 1-1/4” thick and the cable comes out from the back). Also designed to fit # 003-32772-00.

It is formatted for installation on the side of the jack plate, hole shot plate or set back. If you are interested in installing to your transom, please see our Armor Plates.

$199.00

Add to cart
In Stock

Rated 5.00 out of 5 based on 1 customer rating
TS-AIHD-TS Combo fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001 on a trolling motor

^{Item # TS-AIHD-TS Combo}^{is built in High Quality Aluminum Alloy and Black Powder Coated for Trolling Motor installation. It is designed to fit Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ transducer # 000-16060-001. Also designed to fit # 003-32772-00. The transducer is approx. 10-1/4” long x 2” wide x 1-1/2″ thick and the cable comes out on top near the back.}

^{It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

$225.95

Select options
In Stock

Ram Rail Kit for small Minnkota Trolling Motors

The Ram Rail Kit includes Skeg, 2 stainless steel straps & hardware. The kit can only be installed on a MinnKota trolling motor that has the Prop & Skeg on opposite ends and when the transducer to be attached is too long for the space between the propeller and skeg.

A transducer cannot be attached directly to the Ram Rail Kit and must be purchased along with a specific Transducer Shield to suit your transducer. After purchasing the Ram Rail Kit, click on “Shields” and choose the Transducer Shield to suit your transducer.

This product can be used with most Humminbird, Garmin & Lowrance Transducer Shields made by Transducer Shield and Saver.

Proudly designed and built in USA

$150.00

Select options
In Stock

MK-Filler Block used to attach a Transducer Shield to a MinnKota Ultrex 36 volt

Item # MK-UL-36-DI-Filler this item is used to attach a Transducer Shield to a 24v or 36v Minnkota “Ultrex” trolling motor with a built in Down Image transducer.

For 36 volt includes two 4.0” and one 6″ heavy duty stainless steel black powder coated straps.

This item must be attached to a Transducer Shield (sold separately) in order for this item to work on the trolling motor. After ordering the Filler, please Click on Shields to choose the correct Transducer Shield to suit your transducer.

Proudly Designed and Built in US

$71.95

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

Humminbird 360 Accessory

Item # ACC-RR-360 is an accessory designed to attach a Humminbird 360 to a Trolling Motor using our Mini Receiver Ring or Full Receiver Ring.

Both the ACC-RR-360 and Receiver Ring system are built in 6061 x 3/4″ aircraft aluminum alloy, black powder coated and includes all stainless steel hardware and easy installation instructions.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

Price range: $418.00 through $448.00

Select options This product has multiple variants. The options may be chosen on the product page
In Stock

Full Receiver Ring Minnkota Ultrex Trolling Motor

^{The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.}

^{The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.}

^{Check out the additional T S & S product accessories available to attach to our Receiver Ring system:}

^{* ACC-RR-360 is designed for the Humminbird 360}

^{* ACC-TL is designed for the Humminbird TargetLock}

^{* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”}

^{* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5}

^{The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts}

Proudly Designed and Built in Alabama USA

See More Fish ………. Catch More Fish

$199.00

Add to cart
In Stock

Mini Receiver Ring Minnkota Ultrex Trolling Motor

^{The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.}

^{The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.}

^{Check out the additional T S & S product accessories available to attach to our Receiver Ring system:}

^{* ACC-RR-360 is designed for the Humminbird 360}

^{* ACC-TL is designed for the Humminbird TargetLock}

^{* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”}

^{* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5}

^{The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts}

Proudly Designed and Built in Alabama USA

See More Fish ………. Catch More Fish

$169.00

Add to cart
In Stock

Full Receiver Ring Lowrance Ghost Trolling Motor

^{The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.}

^{The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.}

^{Check out the additional T S & S product accessories available to attach to our Receiver Ring system:}

^{* ACC-RR-360 is designed for the Humminbird 360}

^{* ACC-TL is designed for the Humminbird TargetLock}

^{* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”}

^{* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5}

^{The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts}

Proudly Designed and Built in Alabama USA

See More Fish ………. Catch More Fish

$199.00

Add to cart
In Stock

Full Receiver Ring Garmin Force Trolling Motor

The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.

The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.

Check out the additional T S & S product accessories available to attach to our Receiver Ring system:

* ACC-RR-360 is designed for the Humminbird 360

* ACC-TL is designed for the Humminbird TargetLock

* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”

* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5

The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts

Proudly Designed and Built in Alabama USA

See More Fish ………. Catch More Fish

$199.00

Add to cart
On backorder

Mini Receiver Ring Lowrance Ghost Trolling Motor

^{The Receiver Ring System is designed to allow the attachment of up to three Transducer Shield & Saver product accessories to your trolling motor. We offer a Full or Mini Receiver Ring to fit Garmin Force, Lowrance Ghost or Minnkota Ultrex trolling motors. Coming soon for Motorguide.}

^{The Receiver Ring securely bolts under the trolling motor head for easy accessory attachments.}

^{Check out the additional T S & S product accessories available to attach to our Receiver Ring system:}

^{* ACC-RR-360 is designed for the Humminbird 360}

^{* ACC-TL is designed for the Humminbird TargetLock}

^{* Fish Sniff Fiber Pole is designed for any of the “forward facing transducers”}

^{* Offering three different size Accessory Plates to attach to the Receiver Ring System: ACC-5.1 or ACC-3.5 or ACC-2.5}

^{The Receiver Rings and Accessories are built in 6061 x 3/4″ thick aircraft aluminum alloy, black powder coated and include stainless steel bolts, washers and lock nuts}

Proudly Designed and Built in Alabama USA

See More Fish ………. Catch More Fish

$169.00

Add to cart