The Sleek Hydrodynamic Design will cut through the water for less drag, reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

The Combo includes two Stainless Steel Black Powder coated straps and the appropriate finishing “Ram” and / or “Strip” required to fit Minnkota® and Motorguide® trolling motors 24v 74 lb and up.

Warming:  Minnkota and Motoguide Trolling Motors 70 lb thrust down to 43 lb thrust will require additional components due to the length of the trolling motor housing and size of the transducer.  Garmin Force trolling motors will also require additional components.  Custom parts and pricing will depend on your particular trolling motor.  When placing an order for this product, please make sure to answer all the questions in the questionnaire or call and we will help you over the phone.

Our Products are Proudly Designed and Built in Alabama

See More Fish ……….  Catch More Fish

The post TS-AIHD-TS Combo fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001 on a trolling motor first appeared on Transducer Shield and Saver.

The Transducer Shield’s sleek hydrodynamic design will cut through the water for less drag especially on trolling motors.  It reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

For Trolling Motor installation, two straps are required which are not included.  Optional:  HDTS-B heavy duty black powder coated stainless steel straps @ $5.95 each and available in three sizes to suit your particular trolling motor.

This Transducer Shield is also designed to easily attach to one of our L Brackets or Wedges for Jack Plate, Hole Shot Plate or Set Back installation.

When purchasing this item to attach to your jack plate, please go to:

*  L Brackets for install on the side of the jack plate – choose by jack plate brand and size

*  Wedges for install on the hole shot plate under the jack plate – choose by jack plate brand and size

*  Wedges for install under the transom set back – if your boat does not have a flat set back, this is not a good option for you.

If you do not have a Jack Plate, you do not need our TG-TUG shield GO TO:

*  Spring Back Bracket # SBB-5 to install the transducer on the transom

*  Armor Plate # AP-GAR

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish   ……….   Catch More Fish

The post TG-TUG to fit Garmin traditional dual beam / dual frequency transducer # 010-10272-00 or 010-10249-20 first appeared on Transducer Shield and Saver.

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

NOTE: The Transducer Shield is 6-7/8” long.   For MinnKota 70lb thrust and below (with prop and skeg on opposite ends) or Motorguide 12v 54 lb thrust and below, additional custom components may be required.  If you are unsure about the fit on your trolling motor, please call to place your order 334-514-7147.

Item # TM-XTM-75/150 T  along with additional accessories can easily be bolted to one of our L Brackets for installation on the side of a Jack Plate OR on a Wedges for installation under a Jack Plate if a hole shot plate is present OR on a Wedges for installation on the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-XTM-75/150 T to fit Humminbird XTM 9 HW MDI 75 T or XTM 9 HW MSI 150 T transducer first appeared on Transducer Shield and Saver.

        
Item # TS-LIVE-S is built in High Quality Aluminum Alloy and Black Powder Coated to withstand harsh environment.  It is designed to fit Lowrance® LiveSight™ transducer # 000-14458-001.  Please enlarge the images for transducer recognition.  The transducer cannot be adjusted for forward vision when attached to the jack plate or under the set back

The Transducer Shield’s sleek hydrodynamic design will cut through the water for less drag  It reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

With additional accessories this Transducer Shield can easily be installed on a Jack Plate or Transom Set Back.

1.  Go to L Brackets to choose the bracket to install the Transducer Shield to the side of a Jack Plate
2.  Go to Wedges and choose LWG-2 to install the Transducer Shield on the Hull Set Back, if your boat has a set-back, for example Ranger.
3.  Go to Wedges and choose LWG-2 to install the Transducer Shield on the Hole Shot Plate under the jack plate (not all jack plates have a hole shot plate or baffle plate).

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post TS-LIVE-S to attach Lowrance LiveSight xDucer # 000-14458-001 on Jack Plate, Hole Shot or Transom Set Back first appeared on Transducer Shield and Saver.

CLICK HERE to identify your transducer Humminbird Mega & Solix transducer

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

WARNING:  Due to the size of the transducer and Transducer Shield, when installed on a trolling motor, additional components may be required for a better fit on the trolling motor. If your trolling motor has the skeg at the front you will need a Ram Rail Kit @ $150.00 in addition to the Transducer Shield.  Please call for assistance.

Item # TM-H-7.1 along with additional accessories can easily be bolted to one of our L Brackets for installation on the side of a Jack Plate OR on a Wedge for installation under a Jack Plate if a hole shot plate is present OR on a Wedge for installation on the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-H7.1 fits Humminbird® Solix Mega G2N or G3N DiTransducer XM 14 HW MDI T or Helix Mega G3N or G4N Di Transducer XM 9 HW MDI T first appeared on Transducer Shield and Saver.

CLICK HERE to identify your transducer Humminbird Mega & Solix and Helix transducer

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

WARNING:  Due to the size of the transducer and Transducer Shield, when installed on a trolling motor, additional components may be required for a better fit on the trolling motor. If your trolling motor has the skeg at the front you will need a Ram Rail Kit @ $150.00 in addition to the Transducer Shield.  Please call for assistance.

Item # TM-H-8.3 along with additional accessories can easily be bolted to an L Bracket for installation on the side of a Jack Plate OR on a Wedges for installation on a hole shot plate under a Jack Plate (if a hole shot plate is present) OR on a Wedge for installation on the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-H8.3 fits Humminbird® Solix or Helix Mega G2N, G3N or G4N Mega MSI T Transducer first appeared on Transducer Shield and Saver.

It is uniquely designed to fit an Airmar Transom TM150-T transducer.  Modifications will need to be made to the transducer for it fit into our Transducer Shield.  The alterations are shown in our instructions.

For trolling motor installation, two straps are required and are not included.  Heavy duty stainless steel, black powder coated straps are available @ $5.95 each.

With additional accessories, TM-AM-TM150-T can be bolted to the side of a Jack Plate, on the hole shot plate under the jack plate OR on a boat set back.  Go to L Brackets if bolting to side of the jack plate or go to Wedges if going on a hole shot plate or set back.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.  If you require further assistance, don’t hesitate to contact us.  We are happy to help.

Proudly Designed and Built in the USA

See More Fish ……… Catch More Fish

The post TM-AM-TM150-T to fit Airmar Transom transducer on Trolling Motor first appeared on Transducer Shield and Saver.

The Sleek Hydrodynamic Design will cut through the water for less drag, especially on trolling motors.  It reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

For trolling motor installation, two straps are required which are not included.  Heavy duty stainless steel, black powder coated straps are available @ $5.95 each.

This Transducer Shield® along with additional accessories, can easily be bolted to the side of a Jack Plate using an L Bracket;  on the hole shot plate (under the jack plate) using a wedge;  or on a boat set back (under the transom) using a wedge.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in USA

See More Fish ……….. Catch More Fish

The post TS-SP-SH to fit Lowrance® Hook2 Split Shot transducer 000-14028-001 first appeared on Transducer Shield and Saver.

_{The Combo includes two Stainless Steel Black Powder coated straps and the appropriate finishing “Ram” and / or “Strip” required to fit Minnkota® 24v 80 lb and up OR Motorguide® 24v 74 lb and up.}

_{Motorguide® 12v, 12/24v 70 lb or below will require “custom” parts to fit the Transducer Shield.  Allow extra time when ordering a Transducer Shield to fit your trolling motor.}

_{Minnkota® 12v or 24v 70 lb or below with the skeg at the front and the propeller at the back of the trolling motor (prop and skeg on opposite ends of the trolling motor) will require a custom item “Ram Rail Kit” to allow the Transducer Shield to fit your particular trolling motor.  The cost of the Ram Rail Kit @ $150.00 is in addition to the Transducer Shield.  Please allow extra time when ordering a Transducer Shield if you have this type of trolling motor. If the Ram Rail Kit is required for your trolling motor, you can either call to place your order over the phone 334-514-7147 or we will contact you to add the Ram Rail Kit to your order.}

_{When placing an order for this product, please make sure to answer all of the questions in the questionnaire.  From the information you provide we will be able to determine if additional parts are required.  You will be contacted before the order is shipped.}

_{OPTIONS:
If you plan to install the Triple Shot Transducer on the side of a Jack Plate, Hole Shot Plate under the Jack Plate or Set Back below the transom – Please go to Transducer Shield® Item # TS-TRI-SH}

_{If you plan to install your Triple Shot transducer on the back of the boat (transom) – Please go to Spring Back Bracket Item # SBB-5}

All of the Products are Proudly Designed and Built in the USA
See More Fish …… Catch More Fish

The post TS-TRI-SH combo to fit Lowrance Hook 2 / Reveal Triple Shot xDucer 000-14029-001 on Trolling Motor first appeared on Transducer Shield and Saver.

^{Item # TS-TRI-SH along with additional components can easily be bolted to (a) the side of a Jack Plate or (b) on the Hole Shot Plate under the Jack Plate or (c) on the boat set back (under the transom).  The Transducer Shield must be attached to an L Bracket or Wedge for (a), (b) or (c) installation.}

^{Please be aware that when installing a Triple Shot Transducer at the back of the boat, the transducer will lose the signal when the boat is up on plane.  To track the bottom when the boat is up on plane, a thru hull transducer will be required.  See your Lowrance® owner manual for additional information.}

^{ADDITIONAL COMPONENTS required when purchasing Item # TS-TRI-SH:   
(a)  on the side of a Jack Plate – Please go to L Brackets
(b)  on the Hole Shot Plate under the Jack Plate – Please go to Wedges
(c)  on the Transom Set Back – Please go to Wedges}

^{*** If your boat does not have a Jack Plate or Set Back and you must attach your transducer to the back of the boat on the transom – Please go to Spring Back Bracket Item # SBB-4 .  An Armor Plate for the Triple Shot Transducer will be coming soon.}

^{It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

All of the Products are Proudly Designed and Built in the USA

See More Fish …… Catch More Fish

The post TS-TRI-SH to fit Lowrance Hook 2 / Reveal Triple Shot Transducer # 000-14029-001 on Jack Plate, Hole Shot Plate or Set Back first appeared on Transducer Shield and Saver.