L Bracket is built in in High Quality Aluminum Alloy, Black Powder Coated and includes stainless steel hardware   This L Bracket is designed with a 3″ offset specifically for 8″, 10″ or 12″ Atlas Hydraulic Jack Plates.  The 3″ offset brings the Transducer Shield away from the Jack Plate so that the hydraulic trim rod does not interfere with, or damage the transducer or Transducer Shield® when moving up and down.  IMPORTANT & HELPFUL please open the link below to confirm the size of your jack plate

Atlas Jack Plate – Measuring Guide

PLEASE NOTE:
(1)  A transducer cannot be attached to any of our L Brackets without a Transducer Shield®.  When placing your order for this product, please remember to choose the appropriate Transducer Shield® to match your transducer.

(2)  An Extension is required if you have a Skeeter ZX or FX model boat.  The hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield to lower the transducer.  Click on Extensions to add an extension to your order.

(3)  Typically, a “Side Image” transducer attached to an L Bracket on the Side of a Jack Plate will not track the bottom when the boat is up on plane.  To track the bottom when up on plane an “in hull” transducer is recommended.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post ATLAS 8″ to 12″ Jack Plate – R3 (w/ offset) – for STARBOARD or DRIVER side first appeared on Transducer Shield and Saver.

L Bracket is built in in High Quality Aluminum Alloy, Black Powder Coated and includes stainless steel hardware   This L Bracket is designed with a 3″ offset specifically for 8″, 10″ or 12″ Atlas Hydraulic Jack Plates.  The 3″ offset brings the Transducer Shield away from the Jack Plate so that the hydraulic trim rod does not interfere with, or damage the transducer or Transducer Shield® when moving up and down.  IMPORTANT & HELPFUL please open the link below to confirm the size of your jack plate

Atlas Jack Plate – Measuring Guide

PLEASE NOTE:
(1)  A transducer cannot be attached to any of our L Brackets without a Transducer Shield®.  When placing your order for this product, please remember to choose the appropriate Transducer Shield® to match your transducer.

(2)  An Extension is required if you have a Skeeter ZX or FX model boat.  The hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield to lower the transducer.  Click on Extensions to add an extension to your order.

(3)  Typically, a “Side Image” transducer attached to an L Bracket on the Side of a Jack Plate will not track the bottom when the boat is up on plane.  To track the bottom when up on plane an “in hull” transducer is recommended.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post ATLAS 8″ to 12″ Jack Plate – L3 (w/ offset)- PORT or PASSENGER SIDE first appeared on Transducer Shield and Saver.

Built in High Quality Aluminum Alloy and Black Powder Coated.  The L. Bracket is angled to put the transducer at the correct angle when the boat is in the water.

You will also need to order the correct Transducer Shields® to match your transducer:

NOTE PLEASE:

Go to and add an Extension to your order if you have a Skeeter ZX model boat.  Reason:  the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield.

The post LB-SS-6-8-10-12-L to attach a Transducer Shield to Sea Star 6, 8, 10, 12″ jack plate first appeared on Transducer Shield and Saver.

Built in High Quality Aluminum Alloy and Black Powder Coated.  The L. Bracket is angled to put the transducer at the correct angle when the boat is in the water.

You will also need to order the correct Transducer Shields® to match your transducer:

NOTE PLEASE:

Go to and add an Extension to your order if you have a Skeeter ZX model boat.  Reason:  the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield.

The post LB-SS-6-8-10-12-R to attach a Transducer Shield to Sea Star 6, 8, 10, 12″ jack plate first appeared on Transducer Shield and Saver.

Built in High Quality Aluminum Alloy and Black Powder Coated.  The L. Bracket is angled to put the transducer at the correct angle when the boat is in the water.

You will also need to order the correct Transducer Shields® to match your transducer:

NOTE PLEASE:

Go to and add an Extension to your order if you have a Skeeter ZX model boat.  Reason:  the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield.

The post LB-SS-4-R to attach a Transducer Shield to Sea Star 4″ jack plate first appeared on Transducer Shield and Saver.

Built in High Quality Aluminum Alloy and Black Powder Coated.  The L. Bracket is angled to put the transducer at the correct angle when the boat is in the water.

You will also need to order the correct Transducer Shields® to match your transducer:

NOTE PLEASE:

Go to and add an Extension to your order if you have a Skeeter ZX model boat.  Reason:  the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield.

The post LB-SS-4-L to attach a Transducer Shield to Sea Star 4″ jack plate first appeared on Transducer Shield and Saver.

This L Bracket is suited to fit the RIGHT or STARBOARD side of the jack plate.

This is a Universal L. Bracket which has no pre-drilled holes so that the installer can determine where it can be drilled without interfering with sliding bolts on the side of the jack plate.  For example:  Pro Hi Jacker, Vance, Z-Lock and some older jack plates. Including a Bobs Machine Shop Jack plate that is 4″ or over 12″ for the STARBOARD SIDE 

This L. Bracket is NOT suitable for use on Atlas Jack Plates.

Item # LB-3-RW includes spacers that can be placed between the L. Bracket and Jack Plate to space the bracket away from sliding bolts.

When ordering this item, please remember to choose one of our Transducer Shields® to match your transducer:

(1)  TM-Csi to fit Humminbird® compact side image transducer # XNT 9 SI 180T

(2) TM-DI to fit Humminbird® down image transducer # XNT 9 DI T

(3)  TM-HDsi to fit Humminbird® side image transducer # XHS HDSI 9 180T

(4)  TS-LSS-1 to fit Lowrance® LSS1 structure scan transducer

(5)  TS-LSS2-L to fit Lowrance® LSS2 structure scan transducer

(6)  TS-DSi to fit Lowrance® down scan transducer

On some Skeeter Boat models, the turning chines and/or sponsons may interfere with the side viewing signal.  For this reason it is necessary to attach an extension between the L. Bracket and Transducer Shield.  Please add a 1.5″ extension to your order.

If you have a Bass Cat boat and your jack plate was installed by Bass Cat, please add a 1.5″ extension to your order.

Proudly Designed and Built in Alabama USA

See More Fish  ………………..   Catch More Fish

The post LB-3-RW Blank L. Bracket – STARBOARD side first appeared on Transducer Shield and Saver.

^{A transducer cannot be attached to any of our L Brackets without a Transducer Shield.  Please add one of our Transducer Shields to your shopping cart when ordering your L Bracket.  Click on the Shields tab to choose the appropriate Transducer Shield to suit your transducer.}

^{Typically, a “Side Image” transducer attached to an L Bracket on the side of a jack plate will not track the bottom when the boat is up on plane,  To track the bottom when up on plane, an “in hull” transducer is recommended.}

^{NOTE PLEASE:}

^{On Skeeter ZX or FX model boats, the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield to lower the transducer.}

^{If you need assistance before ordering, please contact us, we will be happy to assist you over the phone.}

^{It is very important that you complete the questionnaire in full when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.} 

 All Products are Proudly Designed and Built in the USA

See More Fish  ………. Catch More Fish

The post Hydro Dynamics Rapid Jack first appeared on Transducer Shield and Saver.

A transducer cannot be attached to any of our L Brackets without a Transducer Shield®.  Please add one of our Transducer Shields® to your shopping cart when ordering your L Bracket.  Go to Shields and pick the appropriate name brand and item to suit your transducer.

NOTE PLEASE:

(A)  Skeeter ZX or FX model boats, the hull turning chines interfere with the side viewing signal.  To overcome this problem add an Extension between the L Bracket and Transducer Shield:

Add a 2.0” extension when your transducer is a Lowrance® LSS1, LSS2, Total Scan, 2-in-1, 3-in-1 or 3D;

Add a 1.5” extension when the Transducer Shield is one of the following: Garmin TG-GT-6, TG-DS-8.4, TG-DS-9, TG-HG-8.5 or Humminbird TM-HX-3, TM-H8.3, TM-H7.1 or Raymarine® Real Vision 3D transducer

(B)  Bass Cat Boats, if the Jack Plate was installed by Bass Cat, it is necessary to add a 1.5″ extension between the L Bracket and Transducer Shield.

Add an Extension to your order if (A) or (B) pertains to your application.  Contact us if you have questions.  We will be happy to assist you.

All of our Products are Proudly Designed and Built in the USA

See More Fish  ……….   Catch More Fish

The post LB-SM-6/8 for Slidemaster 6″ or 8″ Jack Plate first appeared on Transducer Shield and Saver.

Built in High Quality Aluminum Alloy and Black Powder Coated.  The L. Bracket is angled to put the transducer at the correct angle when the boat is in the water.

Please choose one of the following Transducer Shields® to match your transducer:

(1)  Item # TM-Csi for Humminbird® compact side image transducer XNT 9 SI 180T

(2)  Item # TM-Di for Humminbird® down image transducer XNT 9 DI T

(3)  Item # TM-HDsi for Humminbird® high definition side image transducer           XHS HDSI 9 180 T

(4)  Item # TS-Dsi for Lowrance® down scan transducer

(5)  Item # TS-LSS-1 for Lowrance® Structure Scan LSS1 transducer

(6)  Item # TS-LSS2-L for Lowrance® Structure Scan LSS2 transducer

NOTE PLEASE:

Go to and add an Extension to your order if you have a Skeeter ZX model boat.  Reason:  the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield.

The post LB-AT-4.6.8.10.12 to attach a Transducer Shield to ATLAS 8″ to 12″ jack plates first appeared on Transducer Shield and Saver.