jackplate - Transducer Shield and Saver https://transducershieldandsaver.com See More Fish, Catch More Fish Sun, 11 Oct 2026 06:05:00 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://transducershieldandsaver.com/wp-content/uploads/2020/08/cropped-TransducerShieldLogo_2025_prev_ui-e1737125891125-32x32.png jackplate - Transducer Shield and Saver https://transducershieldandsaver.com 32 32 EXT-3.0 Extension https://transducershieldandsaver.com/product/ext-3-0-extension/ https://transducershieldandsaver.com/product/ext-3-0-extension/#respond Thu, 19 Jun 2014 15:30:16 +0000 http://72.52.172.199/?post_type=product&p=779 Aluminum extension attached between an L Bracket and Transducer Shield will lower the transducer if turning chines or trim tabs interfere with transducer side signal

The post EXT-3.0 Extension first appeared on Transducer Shield and Saver.

]]> Item # EXT-3.0 is built-in High-Quality Alloy Aluminum Alloy and Black Powder Coated and will lower the transducer by 3″.

It is pre-drilled to match the hole pattern on our L Brackets and Transducers Shields for easy install.

When placing an order for an extension, please remember to order a Transducer Shield® and L Bracket to suit your transducer and jack plate.

The post EXT-3.0 Extension first appeared on Transducer Shield and Saver.

]]> https://transducershieldandsaver.com/product/ext-3-0-extension/feed/ 0 EXT-2.O” Extension https://transducershieldandsaver.com/product/ext-2-o-extension/ https://transducershieldandsaver.com/product/ext-2-o-extension/#comments Mon, 08 Oct 2012 19:14:27 +0000 http://72.52.172.199/?post_type=product&p=713 An extension between an L Bracket & Transducer Shield to lower the transducer so as to avoid side viewing signal interference with hull turning chines.

The post EXT-2.O” Extension first appeared on Transducer Shield and Saver.

]]> Item # EXT-2.0 is built-in High-Quality Aluminum Alloy and black powder coated. It is pre-drilled to match the hole pattern on our L Brackets and Transducer Shields® for easy install.

An extension is necessary on most Skeeter ZX model boats to lower the level of the transducer, so that the transducer side signal clears the hull sponsons and/or turning chines.

An extension is also required on some jack plates that were installed on Bass Cat boats.  Reason:  the jack plate is longer and installed with 6 bolts to the transom rather than 4 bolts.

When placing an order for an extension, please remember to order a Transducer Shield® and L. Bracket to suit your transducer and jack plate.

Proudly Designed and Made in USA

The post EXT-2.O” Extension first appeared on Transducer Shield and Saver.

]]> https://transducershieldandsaver.com/product/ext-2-o-extension/feed/ 1 EXT-1.5″ Extension https://transducershieldandsaver.com/product/ext-1-5-extension/ https://transducershieldandsaver.com/product/ext-1-5-extension/#comments Fri, 30 Mar 2012 22:05:39 +0000 http://72.52.172.199/?post_type=product&p=672 Aluminum 1.5" Extension attached to an L. Bracket and Transducer Shield to lower the level of the transducer. This item is sometimes required on Skeeter & Bass Cat boats.

The post EXT-1.5″ Extension first appeared on Transducer Shield and Saver.

]]> Item # EXT-1.5 is built-in High-Quality Aluminum Alloy and Black Powder Coated.   It is pre-drilled to match the hole pattern on our L. Brackets and Transducer Shields for easy install. An extension is necessary on most Skeeter ZX model boats to lower the level of the transducer so that the transducer side signal clears the hull sponsons and/or turning chines.

An extension is also required on some Jack Plates that were installed on Bass Cat boats.  Reason:  the jack plate is longer and installed with 6 bolts to the transom rather than 4 bolts. When placing an order for an extension, please remember to order a Transducer Shield® and L. Bracket to suit your transducer and jack plate.

Proudly Designed and Made in USA

The post EXT-1.5″ Extension first appeared on Transducer Shield and Saver.

]]> https://transducershieldandsaver.com/product/ext-1-5-extension/feed/ 1 6/8/10/12 inch BOB’S Machine Jack Plate – New adjustable angle! https://transducershieldandsaver.com/product/bob-s-machine-shop-lb-bm-6-8-10/ https://transducershieldandsaver.com/product/bob-s-machine-shop-lb-bm-6-8-10/#respond Mon, 27 Apr 2009 18:17:42 +0000 http://72.52.172.199/?post_type=product&p=553 LB-BM-6.8.10.12   Fits 6", 8", 10" & 12" Bob's Hydraulic Jack Plates. Used to attach a Transducer Shield to the side of the jack plate.

It is very important that you complete the questionnaire when ordering this product.  The information that you provide will help us to assist you better and avoid a delay in shipping your order.  The more information that we have about your boat and jack plate, the better we can assist you.

Contact us if you need further assistance.

The post 6/8/10/12 inch BOB’S Machine Jack Plate – New adjustable angle! first appeared on Transducer Shield and Saver.

]]>

ITEM # LB-BM-6/8/10/12 is the standard L Bracket and is suited to fit on the right or STARBOARD side of the jack plate. New adjustable angle version!

 

L Bracket is built in High Quality Aluminum Alloy, Black Powder Coated and includes stainless steel hardware.   It is designed to fit Bob’s 6″, 8″ and 10″ Jack Plates.  The L. Bracket along with the Transducer Shield will put the transducer at the correct angle when the boat is in the water.

A transducer cannot be attached to any of our L Brackets without a Transducer Shield®.  Please add one of our Transducer Shields® to your shopping cart when ordering your L Bracket.  Click on Shields to pick the appropriate name brand and item to suit your transducer and add to your cart.

NOTE:

(A)  On Skeeter ZX or FX model boats, the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L. Bracket and Transducer Shield®.

(B)  On Bass Cat Boats, it is necessary to add a 1.5 extension between the L. Bracket and Transducer Shield®

Click on Extensions to add an extension to your order. if (A) or (B) pertains to your application.   Contact us if you have questions.

(3)  Typically, a “Side Image” transducer attached to an L Bracket on the side of a Jack Plate will not track the bottom when the boat is up on plane.  To track the bottom when up on plane, an “in hull” transducer is recommended.

It is VERY IMPORTANT that you complete the questionnaire in full when ordering this item.

All of the Products are Proudly Designed and Built in the USA
See More Fish …… Catch More Fish

The post 6/8/10/12 inch BOB’S Machine Jack Plate – New adjustable angle! first appeared on Transducer Shield and Saver.

]]> https://transducershieldandsaver.com/product/bob-s-machine-shop-lb-bm-6-8-10/feed/ 0