The Transducer Shield’s sleek hydrodynamic design will cut through the water for less drag especially on trolling motors.  It reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

For Trolling Motor installation, two straps are required which are not included.  Optional:  HDTS-B heavy duty black powder coated stainless steel straps @ $5.95 each and available in three sizes to suit your particular trolling motor.

This Transducer Shield is also designed to easily attach to one of our L Brackets or Wedges for Jack Plate, Hole Shot Plate or Set Back installation.

When purchasing this item to attach to your jack plate, please go to:

*  L Brackets for install on the side of the jack plate – choose by jack plate brand and size

*  Wedges for install on the hole shot plate under the jack plate – choose by jack plate brand and size

*  Wedges for install under the transom set back – if your boat does not have a flat set back, this is not a good option for you.

If you do not have a Jack Plate, you do not need our TG-TUG shield GO TO:

*  Spring Back Bracket # SBB-5 to install the transducer on the transom

*  Armor Plate # AP-GAR

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish   ……….   Catch More Fish

The post TG-TUG to fit Garmin traditional dual beam / dual frequency transducer # 010-10272-00 or 010-10249-20 first appeared on Transducer Shield and Saver.

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

NOTE: The Transducer Shield is 6-7/8” long.   For MinnKota 70lb thrust and below (with prop and skeg on opposite ends) or Motorguide 12v 54 lb thrust and below, additional custom components may be required.  If you are unsure about the fit on your trolling motor, please call to place your order 334-514-7147.

Item # TM-XTM-75/150 T  along with additional accessories can easily be bolted to one of our L Brackets for installation on the side of a Jack Plate OR on a Wedges for installation under a Jack Plate if a hole shot plate is present OR on a Wedges for installation on the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-XTM-75/150 T to fit Humminbird XTM 9 HW MDI 75 T or XTM 9 HW MSI 150 T transducer first appeared on Transducer Shield and Saver.

CLICK HERE to identify your transducer Humminbird Mega & Solix transducer

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

WARNING:  Due to the size of the transducer and Transducer Shield, when installed on a trolling motor, additional components may be required for a better fit on the trolling motor. If your trolling motor has the skeg at the front you will need a Ram Rail Kit @ $150.00 in addition to the Transducer Shield.  Please call for assistance.

Item # TM-H-7.1 along with additional accessories can easily be bolted to one of our L Brackets for installation on the side of a Jack Plate OR on a Wedge for installation under a Jack Plate if a hole shot plate is present OR on a Wedge for installation on the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-H7.1 fits Humminbird® Solix Mega G2N or G3N DiTransducer XM 14 HW MDI T or Helix Mega G3N or G4N Di Transducer XM 9 HW MDI T first appeared on Transducer Shield and Saver.

CLICK HERE to identify your transducer Humminbird Mega & Solix and Helix transducer

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

WARNING:  Due to the size of the transducer and Transducer Shield, when installed on a trolling motor, additional components may be required for a better fit on the trolling motor. If your trolling motor has the skeg at the front you will need a Ram Rail Kit @ $150.00 in addition to the Transducer Shield.  Please call for assistance.

Item # TM-H-8.3 along with additional accessories can easily be bolted to an L Bracket for installation on the side of a Jack Plate OR on a Wedges for installation on a hole shot plate under a Jack Plate (if a hole shot plate is present) OR on a Wedge for installation on the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-H8.3 fits Humminbird® Solix or Helix Mega G2N, G3N or G4N Mega MSI T Transducer first appeared on Transducer Shield and Saver.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

WARNING:  Due to the size of the transducer and Transducer Shield, when installed on a trolling motor, additional components may be required for a better fit on the trolling motor. If your trolling motor has the skeg at the front you will need a Ram Rail Kit @ $150.00 in addition to the Transducer Shield.  Please call for assistance.

Item # TM-HX-3 along with additional accessories can easily be bolted to one of our L Brackets for installation on the side of a Jack Plate OR on one of our Wedges for installation under a Jack Plate if a hole shot plate is present OR on one of our Wedges for installation under the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

This Transducer Shield WILL NOT fit the SOLIX G2N or HELIX G3N Side Image Transducer. CLICK HERE to identify your transducer   Humminbird Mega & Solix transducer

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-HX-3 fits Humminbird® Helix G2N Mega Si or Solix G1N Si Transducer first appeared on Transducer Shield and Saver.

If the eyelets for the hose clamp are broken on the transducer, purchase TWO of the Rams and Straps to hold the transducer in place on the trolling motor.  It will also be necessary to apply a bead of 3M 5200 Sealant (or similar product) along the top edge of the transducer to adhere to the trolling motor housing.

This item is suitable for Humminbird® trolling motor style transducers such as XTM 9 DI T;   XTM 9 DI 25 T;   XTM 9 WIDE 20 T or XTM 9 SI 180 T.   Enlarge the picture in the listing to identify the style of the transducer.  If you are unsure, please call for assistance.

Please complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.  We need to know your trolling motor information for “strap” size.

Option:  any transom style transducer can be attached to a trolling motor when using one of our Transducer Shields.

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post RAM BT-2 for Humminbird XTM trolling motor transducers first appeared on Transducer Shield and Saver.

The Transducer Shield’s sleek hydrodynamic design will cut through the water for less drag especially on trolling motors.  It reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

For Trolling Motor installation, two straps are required which are not included and should be purchased separately.   Optional:  HDTS-B heavy duty black powder coated stainless steel straps @ $5.95 each and available in three sizes to suit your trolling motor.

WARNING:  Trolling Motors 12v or 24v 70 lb and below additional custom items will be required for the Total Scan transducer to fit.  Pricing will depend on your particular trolling motor.  When placing an order for this product, please make sure that you answer all the questions in the questionnaire.  From the information you provide we can determine if additional parts are required and you will be contacted.

Item TG-GT-6 along with additional components can easily be bolted to (a) the side of a Jack Plate or (b) on the Hole Shot Plate under the Jack Plate or (c) on the boat set back (under the transom).  The Transducer Shield must be attached to an L Bracket or Wedge for (a), (b) or (c) installation.

ADDITIONAL COMPONENTS required when placing the TG-GT-6 Transducer Shield for the following installation options:

(a)  on the side of a Jack Plate – Please go to L Brackets

(b)  on the Hole Shot Plate under the Jack Plate – Please go to Wedges

(c)  on the Transom Set Back – Please go to Wedges

*** If your boat does not have a Jack Plate or Set Back and you must attach your transducer to the back of the boat on the transom – Please go to Spring Back Bracket Item # SBB-5 and Armor Plate Item # AP-GT-6.

Please be aware that when installing a GT 22, GT 24, GT 52 or GT 54 transducer at the back of the boat, the transducer will lose the signal when the boat is up on plane.  To track the bottom when the boat is up on plane, a thru hull transducer may be required.  See your Garmin® owner manual or Garmin directly for additional information.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

All of the Products are Proudly Designed and Built in the USA
See More Fish …… Catch More Fish

The post TG-GT-6 to fit Garmin GT22, GT24, GT52 or GT54 first appeared on Transducer Shield and Saver.

_{It is uniquely designed to fit the following Humminbird® redesigned Down Image Transducer # XNT 9 DI T (RD). Onix Down Image Transducer # XNT 14 DI T (RD) ,  Mega Down Image Transducer # XM 9 MDI T and XNT 0 HW MDI 75 T.  It is very important that you know YOUR transducer number because Humminbird® HAS NOT changed the transducer numbers on their website.  If you are not sure which transducer you have, please click on the following link –  CLICK HERE to see more transducer information}

_{For trolling motor installation, two straps are required and are not included.  Heavy duty stainless steel, black powder coated straps are available @ $5.95 each.  NOTE: For Minnkota 74 lb thrust and below (with prop & skeg on opposite ends) OR Motorguide 12v 54 lb thrust and below, additional custom components are required.}

_{Item TM-DI-2 along with additional accessories, can easily be bolted to the side of a Jack Plate, on the hole shot plate under the jack plate OR on a boat set back.  For more information please go to L Bracket and/or wedges.}

^{NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.}

_{It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

CLICK HERE to see more transducer information.

_{Proudly Designed and Built in the USA}

_{See More Fish    ……    Catch More Fish}

The post TM-DI-2 fits Humminbird Down Image Xducer # XNT 9 DI T (RD), XM 9 MDI T, Mega XNT 9 HW MDI 75 T or Onix Xducer # XNT 14 DI T (RD) for Trolling Motor, Jack Plate or Set Back first appeared on Transducer Shield and Saver.

Our Armor Plates are designed to protect the transducer from side to side as well as front and back impact. They are designed as an added attachment to our SBB-4 Spring Back Bracket for all around transducer protection.  Consider ordering a Spring Back Bracket SBB-5 when ordering the Armor Plate.  If the Armor Plate is installed anywhere other than on the transom, for example on the set back wall, some shimming may be required if the transducer angle needs to be adjusted.  

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom first appeared on Transducer Shield and Saver.

^{NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.}

_{For trolling motor installation, two straps are required and are not included.  Heavy duty stainless steel, black powder coated straps are available @ $5.95 each.  NOTE: For Minnkota 70 lb thrust and below (with prop & skeg on opposite ends) OR Motorguide 12v 54 lb thrust and below, additional custom components are required.}

_{Item TM-HDSI along with additional accessories, can easily be bolted to the side of a Jack Plate, on the hole shot plate under the jack plate OR on a boat set back.  For more information please go to L Bracket and/or wedges.}

^{NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.}

_{It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post TM-HDsi fits Humminbird® HDSI xDucer XHS 9 HDSI 180 T or XTM 9 HDSI 180 T first appeared on Transducer Shield and Saver.