^{Using this item will make your life so much easier to have everything assembled on the workbench or holding in a vice and then simply attaching the assembly onto the boat surface.}

^{This item is ideal for aluminum, fiberglass and polyethylene boats.  It’s versatile to attach a Spring Back Bracket or Armor Plate to the boat stern (back/transom area).  Installation instructions and hardware are included in the package.}  

^{Although the plate will add extra reinforcement to any Armor Plate or factory bracket to your stern, its HIGHLY recommended to use with SBB-5 Spring Back Bracket}

                    Proudly Designed and Patented in the USA

The post Stainless Steel Backing Plate first appeared on Transducer Shield and Saver.

Whether you're using your factory mount or one of our premium and highly durable Armor Plates, this bracket will absorb the shock of impact from debris while moving through the water.

The double loaded springs allow the transducer to pivot up and around debris as needed, then back down to its original position.

^{Features and Benefits:}

<sup>* Safeguard and improve the life expectancy of the transducer arm / knuckle.
* The top bracket is drilled to accept a variety of transducer factory mounting hardware.
* The bottom bracket has a selection of slots and holes to fine tune the transducer position and finally lock down.</sup>

^{* The Spring Back Bracket® is built in Stainless Steel. Includes all stainless hardware and instructions.  Dimensions: Depth 1” x Height 2.5” x Width 3”}

^{Helpful Accessories INCLUDED in your Combo Pack:}

^{* Axle Assembling Tool is a highly recommended and a very helpful driver tool.  It is a custom designed driver with a threaded end to remove and install the axle rod in the Spring Back Bracket.}   

^{* Stainless Steel Back Plate.  Using this item will make your life so much easier!  No more working under your boat or upside down. Simply, assemble your Armor Plate to the SBB-5 together first, then attach to the Stainless-Steel Backing Plate all from the ease and convenience of your workbench.  Once the unit is complete and attached to the plate, it's as easy as bolting the Stainless-Steel Plate directly to your boat with 4 simple bolts.}  Product dimensions are 2.5" x 4" and clearance space suggested is 3.5" x 6.5"

                    Proudly Designed and Patented in the USA

[embed]https://youtu.be/kZMkPEXGG0w[/embed]

The post SPRING BACK BRACKET (SBB-5) COMBO PACK first appeared on Transducer Shield and Saver.

CMC jack plates are ridged or flat and have large bolt heads protruding out from the jack plate surface. This is why the L Bracket should include 1″ or 1.5″ spacers. Depending on the jack plate (usually manual) height position, the ratchet bolt might hang below the bottom of the jack plate  If this applies to your jack plate, it may be necessary to lower the transducer to avoid side signal interference. To do this, simply add an EXTENSION between the L Bracket and Transducer Shield.             

A transducer cannot be attached to any of our L Brackets without a Transducer Shield®.  When placing your order for this product, please remember to choose the appropriate Transducer Shield® to match your transducer.                        

To avoid a delay in shipping your order, please complete the questionnaire. The more information you provide the better we can assist you.

IMPORTANT:  On Skeeter ZX or FX  boats, the hull turning chines interfere with the side viewing signal. To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield®. Please remember to add an Extension to your order.   Click on Extensions to add an extension to your order.

Typically, a “Side Image” transducer attached to an L Bracket on the side of a jack plate will not track the bottom when the boat is up on plane.  To track the bottom when up on plane, an “in hull” transducer is recommended.

Installing Your Transducer Correctly is Important.  Contact us if you need further assistance.

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post LB-CMC-5/5-8 to fit 5.5 to 8″ CMC Jack Plate first appeared on Transducer Shield and Saver.

It is pre-drilled to match the hole pattern on our L Brackets and Transducers Shields for easy install.

When placing an order for an extension, please remember to order a Transducer Shield® and L Bracket to suit your transducer and jack plate.

The post EXT-3.0 Extension first appeared on Transducer Shield and Saver.

We’ve modified our popular TM-HDsi Transducer Shield® and added a beefy anchor kit to make it work with our Spring Back™ Bracket.  The stainless-steel double-torsion spring will return the transducer to its original position once force is released.  To ensure good water flow to the transducer, we’ve added a larger splash plate to the Spring Back Bracket®.  The Anchor Kit is preset for transom installation and has a 5º angle adjustment range if needed.  Simply attach the Humminbird® Side Image transducer # XHS 9 HDSI 180 T to the shield and install the assembly onto the transom.  Stainless steel hardware and Do-It Yourself instructions are included.

Proudly Designed and Built in the USA

The post SBB-HDSI-Combo to attach Humminbird HDSI xDucer XHS 9 HDSI 180 T & Shield on a Transom first appeared on Transducer Shield and Saver.

The post 6/8/10/12 inch BOB’S Machine Jack Plate – New adjustable angle! first appeared on Transducer Shield and Saver.