Minnkota - Transducer Shield and Saver

Quest Trolling Motor Adaptor Plate

Cicero Scap — Mon, 08 Apr 2024 22:10:43 +0000

_{Item # Q-A-Plate - Quest Adaptor Plate is built in 6061 High Quality Aluminum Alloy and Black Powder Coated.}

_{About our Adaptor Plate: the Adaptor Plate can be attached to a Transducer Shield which will allow you to attach the Transducer Shield to a Minnkota Quest Trolling Motor so that the clamps / straps are attached to the housing correctly.}

_{About the Minnkota Quest Trolling Motor: the Minnkota Quest housing is configured differently to previous Minnkota models: 1. the skeg is off set; 2. the shaft is larger on the housing; and 3. the US2 sonar is shaped differently to the previous Ultrex trolling motor.}
_{The Good News is - if you already own one of our Transducer Shields simply purchase the Quest Adaptor Plate which will easily attach it to your previously purchased Transducer Shield (TM-H8.3, TG-HG-8.5, TS-AIHD-TS or TS-DSS3-TS).}
_{On the longer TS-DSS3-TS and TS-AIHD-TS Transducer Shields, it will be necessary to purchase an additional component "Ram" to close the gap between the US2 cone and the Transducer Shield. When placing your order, please select the Adaptor Plate with a Ram.}
_{The Quest Adaptor Plate cannot be used with a transducer only; it must be attached to a Transducer Shield.}

Another Cool Product Proudly Designed in USA

The post Quest Trolling Motor Adaptor Plate first appeared on Transducer Shield and Saver.

Ram Rail Kit for small Minnkota Trolling Motors

Cicero Scap — Wed, 29 Mar 2023 19:00:17 +0000

The Ram Rail Kit includes Skeg, 2 stainless steel straps & hardware. The kit can only be installed on a MinnKota trolling motor that has the Prop & Skeg on opposite ends and when the transducer to be attached is too long for the space between the propeller and skeg.

A transducer cannot be attached directly to the Ram Rail Kit and must be purchased along with a specific Transducer Shield to suit your transducer. After purchasing the Ram Rail Kit, click on "Shields" and choose the Transducer Shield to suit your transducer.

This product can be used with most Humminbird, Garmin & Lowrance Transducer Shields made by Transducer Shield and Saver.

Proudly designed and built in USA

The post Ram Rail Kit for small Minnkota Trolling Motors first appeared on Transducer Shield and Saver.

MK-Filler Block used to attach a Transducer Shield to a MinnKota Ultrex 36 volt

kmsAdmin — Mon, 28 Nov 2022 19:10:16 +0000

Item # MK-UL-36-DI-Filler this item is used to attach a Transducer Shield to a 24v or 36v Minnkota "Ultrex" trolling motor with a built in Down Image transducer.

For 36 volt includes two 4.0” and one 6" heavy duty stainless steel black powder coated straps.

This item must be attached to a Transducer Shield (sold separately) in order for this item to work on the trolling motor. After ordering the Filler, please Click on Shields to choose the correct Transducer Shield to suit your transducer.

Proudly Designed and Built in US

The post MK-Filler Block used to attach a Transducer Shield to a MinnKota Ultrex 36 volt first appeared on Transducer Shield and Saver.

360 Humminbird – Without a bracket to Ultrex # 360-F-CAB-ULT

Cicero Scap — Mon, 24 Jan 2022 23:15:29 +0000

Item # 360-F-CAB-ULT Conversion Adapter Bracket will allow you to fit a Humminbird 360, which has NO bracket or Universal bracket, to a Minnkota Ultrex trolling motor. Our bracket is pre-drilled to bolt onto the Ultrex hole pattern and a “ferrule and saddle” will clamp the 360 shaft securely to the assembly. The assembly includes a 360 Stabilizer for added stability and less vibration.

Item # 360-F-CAB-ULT is built in 6061 x 5/8 aircraft aluminum alloy, black powder coated, includes 5/16 stainless steel bolts, washers, nyloc nuts and a 360 Stabilizer at $399.00

See More Fish ………. Catch More Fish

Proudly designed and built in Wetumpka, Alabama, USA

The post 360 Humminbird – Without a bracket to Ultrex # 360-F-CAB-ULT first appeared on Transducer Shield and Saver.

360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex

Cicero Scap — Tue, 11 Sep 2018 23:10:46 +0000

Item # 360 Stabilizer to stabilize the Humminbird® 360 Imaging on a Minnkota® Ultrex trolling motor. It is built in 5/16 aluminum alloy and black powder coated. The total length is 15-1/2" and attaches to the existing Humminbird® 360 Imaging bracket on a Minnkota® Ultrex Trolling Motor.

The purpose of our 360 Stabilizer is to: (1) reduce vibration of the Humminbird® 360 when the boat is up on plane and going through rough conditions (2) reduce the chance of breaking the Humminbird® 360 shaft when the transducer comes in contact with underwater obstruction (3) adds support to the Humminbird® 360 shaft and reduces flexing (4) reduces vibration to the 360 transducer when the trolling motor is deployed in the water and in trolling mode, and (5) enhances the structure definition on the fish finder.

Simple installation: attach our 360 Stabilizer base bracket to the existing holes in the Humminbird® 360 mounting bracket and clamp the end of the 360 Stabilizer to the Humminbird® 360 shaft.

The post 360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex first appeared on Transducer Shield and Saver.

HW-Bracket-2 to attach a Hydro Wave speaker box to a Minnkota, Motorguide or Power Pole trolling motor shaft

Cicero Scap — Fri, 30 Mar 2012 22:46:18 +0000

Item # HW-Bracket-2 is built-in High-Quality Aluminum Alloy and Black Powder Coated.

It is designed to attach a Hydro Wave Speaker Box to a trolling motor shaft. The kit includes stainless steel hardware, and one Heavy Duty stainless steel black powder coated hose clamp to secure the bracket to the trolling motor shaft. Easy Do-It Yourself installation instructions included.

Our Hydro Wave Bracket fits Minnkota®, Motorguide® Power Pole Move® trolling motor shafts. This item is not designed for installing a Hydro Wave speaker to the transom.

It is very important that you complete the questionnaire when ordering this item. Particularly if you have a Minnkota ULTREX trolling motor, to ensure that we ship the correct bracket to fit your trolling motor.

The Pictures show a Hydro Wave Speaker Box for reference purposes only. The Speaker Box is not included when ordering an HW-Bracket.

Proudly Designed and Built in the USA

The post HW-Bracket-2 to attach a Hydro Wave speaker box to a Minnkota, Motorguide or Power Pole trolling motor shaft first appeared on Transducer Shield and Saver.