AP-EAG-TRI-SH will fit Lowrance® Triple Shot transducer # 000-16285-001.  To ensure that you are ordering the correct Armor Plate, please enlarge the images for transducer recognition. The Armor Plate includes stainless steel hardware and easy Do-It Yourself instructions.  Your transducer factory bracket will not be required with an Armor Plate.

Our Armor Plates are designed as an added attachment to our Spring Back Bracket for all around transducer protection.  Please consider ordering a Spring Back Bracket # SBB-5 when purchasing the Armor Plate.  The transducer is 10.50″ long and we highly recommend adding a Spring Back Bracket to your order.   If an Armor Plate breaks that has been attached to the boat without a Spring Back Bracket it has no warranty whatsoever.

All of the Products are Proudly Designed &

Built in the USA to Protect & Save

The post AP-EAG-TRI-SH to fit Lowrance® Eagle Tripleshot Transducer # 000-16285-001 on a Transom first appeared on Transducer Shield and Saver.

^{Specifications:  1/8 Aircraft Black Powder Coated Aluminum transducer plate, saddle, swivel bracket, two stainless heavy duty black powder coated straps and stainless hardware. This assembly features a Unique Heavy Duty swivel bracket with “Positive Lock” which will not go out of adjustment or swivel once locked down.  Swivel adjustment from 0 to 90 degrees.}

^{When mounted to the trolling motor shaft, it can be adjusted from total forward view to an angled position by simply adjusting the swivel bracket to your choice of view and then “Positive Locked” down.}

^{By using our “Positive Lock” swivel bracket on the trolling motor shaft, looking forward or at a slight angle, the LiveSight transducer allows anglers to cast a lure into the sonar beam and track the lure’s presentation as well as fish movement, turning every cast into a sight-fishing.}

Very Easy Installation.

Proudly Designed and Built in the USA

See More Fish ………  Catch More Fish

The post AP-LIVE-S to attach Lowrance LiveSight Transducer # 000-14458-001 on a trolling motor shaft first appeared on Transducer Shield and Saver.

AP-TRI-SH will fit Lowrance® Triple Shot transducer # 000-14029-001.  To ensure that you are ordering the correct Armor Plate, please enlarge the images for transducer recognition. The Armor Plate includes stainless steel hardware and easy Do-It Yourself instructions.  Your transducer factory bracket will not be required with an Armor Plate.

Our Armor Plates are designed as an added attachment to our Spring Back Bracket for all around transducer protection.  Please consider ordering a Spring Back Bracket # SBB-5 when purchasing the Armor Plate.  The transducer is 10.25″ long and we highly recommend adding a Spring Back Bracket to your order.   If an Armor Plate breaks that has been attached to the boat without a Spring Back Bracket it has no warranty whatsoever.

All of the Products are Proudly Designed &

Built in the USA to Protect & Save

The post AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom first appeared on Transducer Shield and Saver.

The Sleek Hydrodynamic Design will cut through the water for less drag, especially on trolling motors.  It reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

For trolling motor installation, two straps are required which are not included.  Heavy duty stainless steel, black powder coated straps are available @ $5.95 each.

This Transducer Shield® along with additional accessories, can easily be bolted to the side of a Jack Plate using an L Bracket;  on the hole shot plate (under the jack plate) using a wedge;  or on a boat set back (under the transom) using a wedge.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in USA

See More Fish ……….. Catch More Fish

The post TS-SP-SH to fit Lowrance® Hook2 Split Shot transducer 000-14028-001 first appeared on Transducer Shield and Saver.

_{The Combo includes two Stainless Steel Black Powder coated straps and the appropriate finishing “Ram” and / or “Strip” required to fit Minnkota® 24v 80 lb and up OR Motorguide® 24v 74 lb and up.}

_{Motorguide® 12v, 12/24v 70 lb or below will require “custom” parts to fit the Transducer Shield.  Allow extra time when ordering a Transducer Shield to fit your trolling motor.}

_{Minnkota® 12v or 24v 70 lb or below with the skeg at the front and the propeller at the back of the trolling motor (prop and skeg on opposite ends of the trolling motor) will require a custom item “Ram Rail Kit” to allow the Transducer Shield to fit your particular trolling motor.  The cost of the Ram Rail Kit @ $150.00 is in addition to the Transducer Shield.  Please allow extra time when ordering a Transducer Shield if you have this type of trolling motor. If the Ram Rail Kit is required for your trolling motor, you can either call to place your order over the phone 334-514-7147 or we will contact you to add the Ram Rail Kit to your order.}

_{When placing an order for this product, please make sure to answer all of the questions in the questionnaire.  From the information you provide we will be able to determine if additional parts are required.  You will be contacted before the order is shipped.}

_{OPTIONS:
If you plan to install the Triple Shot Transducer on the side of a Jack Plate, Hole Shot Plate under the Jack Plate or Set Back below the transom – Please go to Transducer Shield® Item # TS-TRI-SH}

_{If you plan to install your Triple Shot transducer on the back of the boat (transom) – Please go to Spring Back Bracket Item # SBB-5}

All of the Products are Proudly Designed and Built in the USA
See More Fish …… Catch More Fish

The post TS-TRI-SH combo to fit Lowrance Hook 2 / Reveal Triple Shot xDucer 000-14029-001 on Trolling Motor first appeared on Transducer Shield and Saver.

^{Item # TS-TRI-SH along with additional components can easily be bolted to (a) the side of a Jack Plate or (b) on the Hole Shot Plate under the Jack Plate or (c) on the boat set back (under the transom).  The Transducer Shield must be attached to an L Bracket or Wedge for (a), (b) or (c) installation.}

^{Please be aware that when installing a Triple Shot Transducer at the back of the boat, the transducer will lose the signal when the boat is up on plane.  To track the bottom when the boat is up on plane, a thru hull transducer will be required.  See your Lowrance® owner manual for additional information.}

^{ADDITIONAL COMPONENTS required when purchasing Item # TS-TRI-SH:   
(a)  on the side of a Jack Plate – Please go to L Brackets
(b)  on the Hole Shot Plate under the Jack Plate – Please go to Wedges
(c)  on the Transom Set Back – Please go to Wedges}

^{*** If your boat does not have a Jack Plate or Set Back and you must attach your transducer to the back of the boat on the transom – Please go to Spring Back Bracket Item # SBB-4 .  An Armor Plate for the Triple Shot Transducer will be coming soon.}

^{It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

All of the Products are Proudly Designed and Built in the USA

See More Fish …… Catch More Fish

The post TS-TRI-SH to fit Lowrance Hook 2 / Reveal Triple Shot Transducer # 000-14029-001 on Jack Plate, Hole Shot Plate or Set Back first appeared on Transducer Shield and Saver.

The new Sleek low profile Hydrodynamic design will cut through the water for less drag, especially on trolling motors.  It reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

For trolling motor installation, two straps are required which are not included.  Heavy duty stainless steel, black powder coated straps are available @ $5.95 each.

This Transducer Shield® along with additional accessories, can easily be bolted to the side of a Jack Plate using an L Bracket;  on the hole shot plate (under the jack plate) using a wedge;  or on a boat set back (under the transom) using a wedge.

It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish   ……….   Catch More Fish

The post TS-HDI-4 fits Lowrance HDI (83/200kHz) Transducer # 000-10976-001, # 000-12728-001 & # 000-12570-001 first appeared on Transducer Shield and Saver.

NOTE: Lowrance made this transducer very similar in name and shape as some of their other transducers. Please see the below photo to ensure you are ordering the correct product.

^{An Armor Plate is designed to protect the transducer from side to side as well as front and back impact. An Armor Plate takes the place of the factory transom mounting bracket.  It is also designed to attach to our Spring Back Bracket # SBB-5 for all around transducer protection.
If the Armor Plate is installed anywhere other than on the transom, for example on the set back wall, some shimming may be required if the transducer angle needs to be adjusted.} 

^{A Spring Back Bracket # SBB-5 is recommended when ordering an Armor Plate for all around transducer protection.   If an Armor Plate breaks, which has been attached to the boat without a Spring Back Bracket, it has no warranty whatsoever.}

Our Products are Proudly Designed &

Built in the USA to Protect & Save

The post AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom first appeared on Transducer Shield and Saver.

Item # TS-DSS3-TS  is built in High Quality Aluminum Alloy and Black Powder Coated.  It is designed to fit Lowrance®/Simrad® Total Scan transducer # 000-12568-001 (approx. 10” long x  2-1/4” wide x 1-1/4” thick and the cable comes out from the back) or  Lowrance®/Simrad® Structure Scan 3D transducer # 000-12396-001 (approx. 10” long x 2-1/4” wide x 1-1/2”thick).   This Transducer Shield will also fit the  Live Active Imaging 2-in-1 transducer # 000-14490-001 or 3-in-1 transducer # 001-14489-001. Also designed to fit # 003-20401-02 & # 003-27928-02.  NOTE:  this item DOES NOT fit the ActiveImageing HD 3-in-1 Transducer  # 000-16062-001 or ActiveImaging HD 3-in-1 FishReveal Transducer # 000-1060-001.

The Sleek Hydrodynamic Design will cut through the water for less drag, reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

Item TS-DSS3-TS along with additional components can easily be bolted to (a) the side of a Jack Plate or (b) on the Hole Shot Plate under the Jack Plate or (c) on the boat set back (under the transom).  The Transducer Shield must be attached to an L Bracket or Wedge for (a), (b) or (c) installation.   NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

Please be aware that when installing a Total Scan, Structure Scan 3D or Live Active Imaging transducers at the back of the boat, the transducer will lose the signal when the boat is up on plane.  To track the bottom when the boat is up on plane, a thru hull transducer will be required.  See your Lowrance® owner manual for additional information.

ADDITIONAL COMPONENTS required when purchasing Item # TS-DSS3-TS:

(a)  on the side of a Jack Plate – Click on L Brackets
(b)  on the Hole Shot Plate under the Jack Plate – Click on Wedges
(c)  on the Transom Set Back – Click on Wedges

*** If your boat does not have a Jack Plate or Set Back and you must attach your transducer to the back of the boat on the transom – Please go to Spring Back Bracket Item # SBB-4 and Armor Plate Item # AP-TS-SS2-3D

It is very important that you complete the questionnaire when ordering our products. The information you provide will help us to assist you better and avoid a delay in shipping your order.

All of the Products are Proudly Designed and Built in the USA
See More Fish …… Catch More Fish

The post TS-DSS3-TS to fit Lowrance®Total Scan, Structure Scan 3D and HDS Live xDucer 2-in-1 or 3-in-1 on Jack Plate, Hole Shot or Transom Set Back first appeared on Transducer Shield and Saver.

Item TS-LSS-3D-AM includes two Stainless Black Powder Coated heavy duty straps, Custom Ram (when required) and stainless steel hardware.  The sleek hydrodynamic design will cut through the water for less drag, especially on trolling motors.  It reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

On Minnkota Trolling Motors 70 lb thrust and below, with prop at the front of the housing, it will require a custom kit to attach Item # TS-LSS-3D-AM to the trolling motor.  This is a custom item which cannot be ordered online.  Please call to place an order.

Item TS-LSS-3D-AM can be attached to one of our L Brackets if you want the installation on the side of your jack plate.  With this installation, please remember that it will be necessary to install a thru hull transducer to read depth when the boat is up on plane.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post TS-LSS-3D-AM to fit Lowrance LSS1 and Airmar TM150 pod transducer first appeared on Transducer Shield and Saver.