AP-EAG-TRI-SH will fit Lowrance® Triple Shot transducer # 000-16285-001.  To ensure that you are ordering the correct Armor Plate, please enlarge the images for transducer recognition. The Armor Plate includes stainless steel hardware and easy Do-It Yourself instructions.  Your transducer factory bracket will not be required with an Armor Plate.

Our Armor Plates are designed as an added attachment to our Spring Back Bracket for all around transducer protection.  Please consider ordering a Spring Back Bracket # SBB-5 when purchasing the Armor Plate.  The transducer is 10.50″ long and we highly recommend adding a Spring Back Bracket to your order.   If an Armor Plate breaks that has been attached to the boat without a Spring Back Bracket it has no warranty whatsoever.

All of the Products are Proudly Designed &

Built in the USA to Protect & Save

The post AP-EAG-TRI-SH to fit Lowrance® Eagle Tripleshot Transducer # 000-16285-001 on a Transom first appeared on Transducer Shield and Saver.

L Bracket is built in in High Quality Aluminum Alloy, Black Powder Coated and includes stainless steel hardware   This L Bracket is designed with a 3″ offset specifically for 8″, 10″ or 12″ Atlas Hydraulic Jack Plates.  The 3″ offset brings the Transducer Shield away from the Jack Plate so that the hydraulic trim rod does not interfere with, or damage the transducer or Transducer Shield® when moving up and down.  IMPORTANT & HELPFUL please open the link below to confirm the size of your jack plate

Atlas Jack Plate – Measuring Guide

PLEASE NOTE:
(1)  A transducer cannot be attached to any of our L Brackets without a Transducer Shield®.  When placing your order for this product, please remember to choose the appropriate Transducer Shield® to match your transducer.

(2)  An Extension is required if you have a Skeeter ZX or FX model boat.  The hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield to lower the transducer.  Click on Extensions to add an extension to your order.

(3)  Typically, a “Side Image” transducer attached to an L Bracket on the Side of a Jack Plate will not track the bottom when the boat is up on plane.  To track the bottom when up on plane an “in hull” transducer is recommended.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post ATLAS 8″ to 12″ Jack Plate – L3 (w/ offset)- PORT or PASSENGER SIDE first appeared on Transducer Shield and Saver.

Built in High Quality Aluminum Alloy and Black Powder Coated.  The L. Bracket is angled to put the transducer at the correct angle when the boat is in the water.

You will also need to order the correct Transducer Shields® to match your transducer:

NOTE PLEASE:

Go to and add an Extension to your order if you have a Skeeter ZX model boat.  Reason:  the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield.

The post LB-SS-6-8-10-12-L to attach a Transducer Shield to Sea Star 6, 8, 10, 12″ jack plate first appeared on Transducer Shield and Saver.

Built in High Quality Aluminum Alloy and Black Powder Coated.  The L. Bracket is angled to put the transducer at the correct angle when the boat is in the water.

You will also need to order the correct Transducer Shields® to match your transducer:

NOTE PLEASE:

Go to and add an Extension to your order if you have a Skeeter ZX model boat.  Reason:  the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield.

The post LB-SS-6-8-10-12-R to attach a Transducer Shield to Sea Star 6, 8, 10, 12″ jack plate first appeared on Transducer Shield and Saver.

Built in High Quality Aluminum Alloy and Black Powder Coated.  The L. Bracket is angled to put the transducer at the correct angle when the boat is in the water.

You will also need to order the correct Transducer Shields® to match your transducer:

NOTE PLEASE:

Go to and add an Extension to your order if you have a Skeeter ZX model boat.  Reason:  the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield.

The post LB-SS-4-R to attach a Transducer Shield to Sea Star 4″ jack plate first appeared on Transducer Shield and Saver.

Built in High Quality Aluminum Alloy and Black Powder Coated.  The L. Bracket is angled to put the transducer at the correct angle when the boat is in the water.

You will also need to order the correct Transducer Shields® to match your transducer:

NOTE PLEASE:

Go to and add an Extension to your order if you have a Skeeter ZX model boat.  Reason:  the hull turning chines interfere with the side viewing signal.  To help correct this problem it is necessary to add an extension between the L Bracket and Transducer Shield.

The post LB-SS-4-L to attach a Transducer Shield to Sea Star 4″ jack plate first appeared on Transducer Shield and Saver.

The Sleek Hydrodynamic Design will cut through the water for less drag, reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

The Combo includes two Stainless Steel Black Powder coated straps and the appropriate finishing “Ram” and / or “Strip” required to fit Minnkota® and Motorguide® trolling motors 24v 74 lb and up.

Warming:  Minnkota and Motoguide Trolling Motors 70 lb thrust down to 43 lb thrust will require additional components due to the length of the trolling motor housing and size of the transducer.  Garmin Force trolling motors will also require additional components.  Custom parts and pricing will depend on your particular trolling motor.  When placing an order for this product, please make sure to answer all the questions in the questionnaire or call and we will help you over the phone.

Our Products are Proudly Designed and Built in Alabama

See More Fish ……….  Catch More Fish

The post TS-AIHD-TS Combo fits Lowrance® ActiveImaging HD™ transducer # 000-16062-001 or ActiveImaging HD™ FishReveal transducer # 000-16060-001 on a trolling motor first appeared on Transducer Shield and Saver.

The post “The Wedge” – Trolling Motor Shallow Water Bracket first appeared on Transducer Shield and Saver.

        
Item # TS-LIVE-S is built in High Quality Aluminum Alloy and Black Powder Coated to withstand harsh environment.  It is designed to fit Lowrance® LiveSight™ transducer # 000-14458-001.  Please enlarge the images for transducer recognition.  The transducer cannot be adjusted for forward vision when attached to the jack plate or under the set back

The Transducer Shield’s sleek hydrodynamic design will cut through the water for less drag  It reduces collection of debris, keeps the transducer positioned correctly and will not interfere with the transducer signal.

With additional accessories this Transducer Shield can easily be installed on a Jack Plate or Transom Set Back.

1.  Go to L Brackets to choose the bracket to install the Transducer Shield to the side of a Jack Plate
2.  Go to Wedges and choose LWG-2 to install the Transducer Shield on the Hull Set Back, if your boat has a set-back, for example Ranger.
3.  Go to Wedges and choose LWG-2 to install the Transducer Shield on the Hole Shot Plate under the jack plate (not all jack plates have a hole shot plate or baffle plate).

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post TS-LIVE-S to attach Lowrance LiveSight xDucer # 000-14458-001 on Jack Plate, Hole Shot or Transom Set Back first appeared on Transducer Shield and Saver.

^{Specifications:  1/8 Aircraft Black Powder Coated Aluminum transducer plate, saddle, swivel bracket, two stainless heavy duty black powder coated straps and stainless hardware. This assembly features a Unique Heavy Duty swivel bracket with “Positive Lock” which will not go out of adjustment or swivel once locked down.  Swivel adjustment from 0 to 90 degrees.}

^{When mounted to the trolling motor shaft, it can be adjusted from total forward view to an angled position by simply adjusting the swivel bracket to your choice of view and then “Positive Locked” down.}

^{By using our “Positive Lock” swivel bracket on the trolling motor shaft, looking forward or at a slight angle, the LiveSight transducer allows anglers to cast a lure into the sonar beam and track the lure’s presentation as well as fish movement, turning every cast into a sight-fishing.}

Very Easy Installation.

Proudly Designed and Built in the USA

See More Fish ………  Catch More Fish

The post AP-LIVE-S to attach Lowrance LiveSight Transducer # 000-14458-001 on a trolling motor shaft first appeared on Transducer Shield and Saver.