AP-EAG-TRI-SH will fit Lowrance® Triple Shot transducer # 000-16285-001.  To ensure that you are ordering the correct Armor Plate, please enlarge the images for transducer recognition. The Armor Plate includes stainless steel hardware and easy Do-It Yourself instructions.  Your transducer factory bracket will not be required with an Armor Plate.

Our Armor Plates are designed as an added attachment to our Spring Back Bracket for all around transducer protection.  Please consider ordering a Spring Back Bracket # SBB-5 when purchasing the Armor Plate.  The transducer is 10.50″ long and we highly recommend adding a Spring Back Bracket to your order.   If an Armor Plate breaks that has been attached to the boat without a Spring Back Bracket it has no warranty whatsoever.

All of the Products are Proudly Designed &

Built in the USA to Protect & Save

The post AP-EAG-TRI-SH to fit Lowrance® Eagle Tripleshot Transducer # 000-16285-001 on a Transom first appeared on Transducer Shield and Saver.

Installing your transducer on a flat transom or pontoon boat? No problem! Our Shim Kits make it easy to achieve the perfect mounting angle. Built specifically for custom transom installations, these kits allow you to effortlessly adjust from the standard 70-degree to a 90-degree angle. Each kit includes three different shim sizes, ensuring a precise fit for your unique setup.

^{A Spring Back Bracket # SBB-5 is recommended when ordering an Armor Plate for all around transducer protection.   If an Armor Plate breaks, which has been attached to the boat without a Spring Back Bracket, it has no warranty.}

^{This Armor Plate is designed to fit Lowrance® Active Imaging HD™ 3-in-1 transducer # 000-16062-001 (approximately 10-1/4″ long x 2” wide x 1-1/4” wide).  This item includes stainless steel hardware and easy Do-It Yourself instructions.}  

NOTE: Lowrance made this transducer very similar in name and shape as their other transducers.  Please see the below the informational photo to ensure you are ordering the correct part for your corresponding transducer. 

Our Products are Proudly Designed &

Built in the USA to Protect & Save

The post AP-AI-HD for Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001 first appeared on Transducer Shield and Saver.

^{Specifications:  1/8 Aircraft Black Powder Coated Aluminum transducer plate, saddle, swivel bracket, two stainless heavy duty black powder coated straps and stainless hardware. This assembly features a Unique Heavy Duty swivel bracket with “Positive Lock” which will not go out of adjustment or swivel once locked down.  Swivel adjustment from 0 to 90 degrees.}

^{When mounted to the trolling motor shaft, it can be adjusted from total forward view to an angled position by simply adjusting the swivel bracket to your choice of view and then “Positive Locked” down.}

^{By using our “Positive Lock” swivel bracket on the trolling motor shaft, looking forward or at a slight angle, the LiveSight transducer allows anglers to cast a lure into the sonar beam and track the lure’s presentation as well as fish movement, turning every cast into a sight-fishing.}

Very Easy Installation.

Proudly Designed and Built in the USA

See More Fish ………  Catch More Fish

The post AP-LIVE-S to attach Lowrance LiveSight Transducer # 000-14458-001 on a trolling motor shaft first appeared on Transducer Shield and Saver.

CLICK HERE to identify your transducer Humminbird Mega & Solix transducer

An Armor Plate is designed to protect the transducer from side to side as well as front and back impact. The Armor Plate takes the place of the factory transom mounting bracket.  If the Armor Plate is installed anywhere other than on the transom, for example on the set back wall, some shimming may be required if the angle needs to be adjusted.  Warning: We do not recommend the Spring Back Bracket and Armor Plate on the set back wall.  It could reduce the flow of water to the engine.

An Armor Plate is also designed to attach to our Spring Back Bracket # SBB-5 for all around transducer protection.   If an Armor Plate breaks, which has been attached to the boat without a Spring Back Bracket, it has no warranty whatsoever

It is very important that you complete the questionnaire in full when ordering any of our products.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish   ……….  Catch More Fish

The post AP-H-7.1 to fit Humminbird Helix Mega DI + Dual Spectrum Chirp Transducer # XM 9 HW MDI T or XM 14 HW CMSI T on a Transom first appeared on Transducer Shield and Saver.

This product is designed to fit:

Humminbird® Helix G3N Mega  SI + DI + Dual Spectrum Chirp transom transducer # XM 9 HW MSI T. or Solix G2N Mega SI+DI+Dual Spectrum Chirp transom transducer # XM 14 HW MSI T.

These are the latest transducers and are  8-3/8” L x 2-1/4” Wide.   To ensure that you are ordering the correct Armor Plate, please enlarge the images for transducer recognition. It is very important that you know YOUR transducer when ordering this product. The transducer number can be found labeled on the cable closest to the transducer plug.  The transducer factory bracket will not be required with an Armor Plate.

CLICK HERE to identify your transducer  Humminbird Mega & Solix transducer

Our Armor Plates are designed to protect the transducer from side to side as well as front and back impact. They are designed as an added attachment to our SBB-5 Spring Back Bracket for all around transducer protection. The transducer is large and heavy and we highly recommend adding a Spring Back Bracket to your order.   If an Armor Plate breaks that has been attached to the boat without a Spring Back Bracket it has no warranty whatsoever.

If the Armor Plate is installed anywhere other than on the transom, for example on the set back wall, some shimming may be required if the transducer angle needs to be adjusted. If you know that you are installing the Armor Plate on a 90° surface, please tell us in the comment area when placing your order.    WARNING:  We do not recommend the Spring Back Bracket and Armor Plate on the set back wall.  It could reduce the flow of water to the engine.

All of the Products are Proudly Designed and Built in the USA

The post AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T first appeared on Transducer Shield and Saver.

AP-SP-SH will fit Lowrance® Split Shot Chirp and Down Scan transducer # 000-14028-001 & & Eagle Splitshot HD 000-16284-001 003-31993-00.  To ensure that you are ordering the correct Armor Plate, please enlarge the images for transducer recognition. The Armor Plate includes stainless steel hardware and easy Do-It Yourself instructions.  Your transducer factory bracket will not be required with an Armor Plate.

Our Armor Plates are designed as an added attachment to our Spring Back Bracket for all around transducer protection.  Please consider ordering a Spring Back Bracket # SBB-5 when purchasing the Armor Plate.

All of the Products are Proudly Designed &

Built in the USA To Protect & Save

The post AP-SP-SH Armor Plate to fit Lowrance® Hook 2 Split Shot Transducer & Eagle Splitshot HD first appeared on Transducer Shield and Saver.

AP-TRI-SH will fit Lowrance® Triple Shot transducer # 000-14029-001.  To ensure that you are ordering the correct Armor Plate, please enlarge the images for transducer recognition. The Armor Plate includes stainless steel hardware and easy Do-It Yourself instructions.  Your transducer factory bracket will not be required with an Armor Plate.

Our Armor Plates are designed as an added attachment to our Spring Back Bracket for all around transducer protection.  Please consider ordering a Spring Back Bracket # SBB-5 when purchasing the Armor Plate.  The transducer is 10.25″ long and we highly recommend adding a Spring Back Bracket to your order.   If an Armor Plate breaks that has been attached to the boat without a Spring Back Bracket it has no warranty whatsoever.

All of the Products are Proudly Designed &

Built in the USA to Protect & Save

The post AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom first appeared on Transducer Shield and Saver.

Item # AP-HX-1 is built in High Quality Aluminum Alloy and Black Powder Coated for installation on the boat transom.  This product is designed to fit Humminbird® MEGA SI transducer # XM 9 20 MSI T or SOLIX SI transducer # XM 14 20 MSI T (transducer dimensions 7-1/4 L x 3” Wide).  This item includes stainless steel hardware and easy Do-It Yourself instructions.  To ensure that you are ordering the correct Armor Plate, please enlarge the images for transducer recognition or click here to identify your transducer Humminbird Mega & Solix transducer

An Armor Plate is designed to protect the transducer from side to side as well as front and back impact. An Armor Plate takes the place of the factory transom mounting bracket.  If the Armor Plate is installed anywhere other than on the transom, for example on the set back well, some shimming may be required if the angle needs to be adjusted.

An Armor Plate is also designed to attach to our Spring Back Bracket # SBB-5 for all around transducer protection.   If an Armor Plate breaks, which has been attached to the boat without a Spring Back Bracket, it has no warranty whatsoever.

WARNING:  We do not recommend the Spring Back Bracket and Armor Plate on the set back wall.  It could reduce the flow of water to the engine.

It is very important that you complete the questionnaire in full when ordering any of our products.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

All of the Products are Proudly Designed and Built in the USA
See More Fish …… Catch More Fish

The post AP-HX-1 to fit Humminbird Mega SI or Solix SI Transducer on a Transom first appeared on Transducer Shield and Saver.

Our Armor Plates are designed to protect your transducer from side to side as well as front and back impact.  They are designed as an added attachment to our SBB-4 Spring Back Bracket for all around transducer protection.  Consider ordering a Spring Back Bracket when ordering the Armor Plate.

If the Armor Plate is installed anywhere other than on the transom, for example on the set back wall, some shimming may be required, if the transducer angle needs to be adjusted.

Is is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post AP-GAR-2 to Fit Garmin Dual Beam transducer first appeared on Transducer Shield and Saver.

Item # AP-GT-6 is built in High Quality Aluminum Alloy and Black Powder Coated for installation on the boat transom.  It is designed to protect the transducer from side to side as well as front to back impact.  If the Armor Plate is installed anywhere other than on the transom, for example on the set back wall, some shimming may be required if the transducer angle needs to be adjusted.

Our Armor Plates are designed as an added attachment to our SBB-5 Spring Back Bracket for all around transducer protection.  Please consider ordering an SBB-5 when ordering the Armor Plate.

To ensure that you are ordering the correct Armor Plate, please enlarge the images for transducer recognition.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA
See More Fish …… Catch More Fish

The post AP-GT-6 to fit Garmin GT 22, GT 24, GT 52 or GT 54 first appeared on Transducer Shield and Saver.