Showing 1–30 of 48 results

  • "The Wedge" - Trolling Motor Shallow Water Bracket
    In Stock

    “The Wedge” – Trolling Motor Shallow Water Bracket

    Let’s Fish Shallow with “The Wedge”.  No more holding the trolling motor rope to fish shallow.
    Simply place “The Wedge” beneath the trolling motor bracket and GO SHALLOW.
    Available to fit Garmin Force, Lowrance Ghost, Minnkota Ultrex and Fortrex or Motorguide Pro Tour.

    $114.95 – $134.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • 360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex
    Picture shows 360 Stabilizer attached to the shaft of a Humminbird 360
    In Stock

    360 Stabilizer attaches to Humminbird 360 on a Minnkota Ultrex

    Item # 360 Stabilizer to stabilize the Humminbird® 360 Imaging on a Minnkota® Ultrex trolling motor.  It is built in 5/16 aluminum alloy and black powder coated.  The total length is 15-1/2″ and attaches to the existing Humminbird® 360 Imaging bracket on a Minnkota® Ultrex Trolling Motor.

    The purpose of our 360 Stabilizer is to:  (1)  reduce vibration of the Humminbird® 360 when the boat is up on plane and going through rough conditions  (2) reduce the chance of breaking the Humminbird® 360 shaft when the transducer comes in contact with underwater obstruction  (3) adds support to the Humminbird® 360 shaft and reduces flexing  (4) reduces vibration to the 360 transducer when the trolling motor is deployed in the water and in trolling mode, and  (5) enhances the structure definition on the fish finder.

    Simple installation:  attach our 360 Stabilizer base bracket to the existing holes in the Humminbird® 360 mounting bracket and clamp the end of the 360 Stabilizer to the Humminbird® 360 shaft.

    $149.00
    Select options
  • AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom
    AP-CSi Armor Plate
    In Stock

    AP-CSi to fit a Humminbird Side Image xDucer XNT 9 SI 180 T or XNT 9 HW MSI 150 T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $49.95
    Select options
  • AP-D-Vu to fit Garmin GT20
    AP-D-DU
    In Stock

    AP-D-Vu to fit Garmin GT20

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $69.95
    Select options
  • AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom
    AP-DI-2
    In Stock

    AP-DI-2 to fit Humminbird Down Image xDucer # XNT 9 DI T (RD) or XNT 9 HW MDI 75 T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $49.95
    Select options
  • AP-DS-9 to fit Garmin GT41, GT50 & GT51
    AP-DS-9
    In Stock

    AP-DS-9 to fit Garmin GT41, GT50 & GT51

    This product is designed to fit Garmin® DownVü/SideVü (with Chirp) transom mount transducer model GT41, GT50 and GT51.

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.

    $79.95
    Select options
  • AP-DS-Vu to fit Garmin GT30 and GT34
    AP-DS-VU
    In Stock

    AP-DS-Vu to fit Garmin GT30 and GT34

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket. Please complete the questionnaire below when ordering this product.

    $69.95
    Select options
  • AP-AI-HD to fit Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001
    Armor Plate to fit Lowrance Pro HD Transducer
    In Stock

    AP-AI-HD to fit Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001

    $79.95
    Select options
  • AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom
    Picture shows Armor Plate with Lowrance 3-in-1 Transducer (not HD)
    In Stock

    AP-TS-3D to fit Lowrance/Simrad Total Scan, LSS2, Structure Scan 3D, Total Scan, Live Active Imaging 2-in-1 or 3-in-1 transducer on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.

    Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $79.95
    Select options
  • AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom
    In Stock

    AP-TRI-SH to fit Lowrance® Hook2 / Reveal Triple Shot Transducer # 000-14029-001 on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket.  This Armor Plate will NOT fit the latest Lowrance Triple Shot transducer # 000-16285-001 
    It is very important that you complete the questionnaire in full when ordering any of our products.

    $94.95
    Select options
  • AP-DSi to fit Lowrance DSI xDucer 000-10260-001 on a Transom
    AP-DSi Armor Plate
    In Stock

    AP-DSi to fit Lowrance DSI xDucer 000-10260-001 on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boat without a jack plate.  Recommended as an added accessory to our SBB-4 Spring Back Bracket.

    $49.95
    Select options
  • AP-GAR-2 to Fit Garmin Dual Beam transducer
    AP-GAR-2
    In Stock

    AP-GAR-2 to Fit Garmin Dual Beam transducer

    Armor Plate AP-GAR-2 to fit Garmin Dual Beam transducer.  Enlarge the pictures to identify your transducer.  Please answer all questions in the questionnaire.

    $74.95
    Select options
  • AP-GT-6 Armor Plate to fit Garmin GT22, GT24, GT52 or GT54
    Picture shows Garmin Transducer and AP-GT-6 Armor Plate (transducer is not included)
    In Stock

    AP-GT-6 to fit Garmin GT 22, GT 24, GT 52 or GT 54

    For transom installation to protect your transducer from side to side and front to back impact.

    Ideal for boats with flat transoms or for boats without a jack plate.

    Recommended as an added accessory to our SBB-5 Spring Back Bracket. 

    It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

     

    $69.95
    Select options
  • AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T
    Armor Plate AP-H-8.3 to fit Humminbird Mega SI Transducer
    In Stock

    AP-H-8.3 to fit Humminbird G3N SI+DI# XM 9 HW MSI T or G2N SI+DI #XM 14 HW MSI T

    For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $89.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • AP-HDI-2 to fit Lowrance HDI (83/200kHz) 000-10976-001 xDucer on a Transom
    AP-HDI-2
    In Stock

    AP-HDI-2 to fit Lowrance HDI (83/200kHz) 000-10976-001 xDucer on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-5 Spring Back Bracket.  Please complete the questionnaire below when ordering this product.

    $59.95
    Select options
  • AP-HDI-3 to fit Lowrance HDI (50/200kHz) 000-10977-001 xDucer on a Transom
    AP-HDI-3
    In Stock

    AP-HDI-3 to fit Lowrance HDI (50/200kHz) 000-10977-001 xDucer on a Transom

    For transom installation to protect your transducer from side to side and front to back impact. Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-4 Spring Back Bracket # SBB-5.  Please complete the questionnaire below when ordering this product.

    $74.95
    Select options
  • AP-HUM-2 to fit Humminbird xDucer XNT 9 HW T, XNT 9 20 T & XNT 14 20 T on a Transom
    AP-HUM Armor Plate
    In Stock

    AP-HUM-2 to fit Humminbird xDucer XNT 9 HW T, XNT 9 20 T & XNT 14 20 T on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms or for boats without a jack plate.  Recommended as an added accessory to our SBB-4 Spring Back Bracket.

    $49.95
    Select options
  • AP-HX-1 to fit Humminbird Mega SI or Solix SI Transducer on a Transom
    In Stock

    AP-HX-1 to fit Humminbird Mega SI or Solix SI Transducer on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and for boats without a jack plate. Recommended as an added accessory to our SBB-5 Spring Back Bracket.

    $89.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • AP-LIVE-S to attach a Lowrance Live Sight # 000-14458-001 onto a Trolling Motor Shaft
    AP-LIVE attached to Lowrance Live Site Transducer
    In Stock

    AP-LIVE-S to attach Lowrance LiveSight Transducer # 000-14458-001 on a trolling motor shaft

    AP-LIVE-S when attached to a trolling motor shaft, the angle of the transducer can be adjusted and “Positive Locked”.  Fits Lowrance® LiveSight™ transducer # 000-14458-001 

    $199.95
    Select options
  • AP-LOW to fit Lowrance Skimmer xDucer 106-72 on a Transom
    AP-LOW Armor Plate
    In Stock

    AP-LOW to fit Lowrance Skimmer xDucer 106-72 on a Transom

    For transom installation to protect your transducer from side to side and front and back impact.  Ideal for boats with flat transoms and for boats without a jack plate.  Recommended as an added accessory to our SBB-4 Spring Back Bracket.

    $49.95
    Select options
  • AP-ONIX-HDSI to fit Humminbird Onix xDucer XT 14 20 HDSI T or XT 14 20 HDSI T (RD) on a Transom
    AP-ONIX-HDSI
    In Stock

    AP-ONIX-HDSI to fit Humminbird Onix xDucer XT 14 20 HDSI T or XT 14 20 HDSI T (RD) on a Transom

    For transom installation to protect your transducer from side to side and front to back impact.  Ideal for boats with flat transoms and without a jack plate.  Recommended as an added accessory to our SBB-4 Spring Back Bracket

    $84.95
    Select options
  • L Bracket with Offset for an Atlas 8" to 12" Jack Plate
    Transducer Shield attached to the side of an Atlas Jack Plate
    In Stock

    ATLAS 8″ to 12″ Jack Plate – R3 (w/ offset) – for STARBOARD or DRIVER side

    L Bracket with 3 inch offset to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ or 12″ Jack Plate. Also available for the Port Side.       It is very important that you complete the questionnaire when ordering this item.you

    $79.95
    Select options
  • L Bracket with Offset for an Atlas 8" to 12" Jack Plate
    Transducer Shield attached to the side of an Atlas Jack Plate
    In Stock

    ATLAS 8″ to 12″ Jack Plate – L3 (w/ offset)- PORT or PASSENGER SIDE

    L Bracket with 3 inch offset to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ or 12″ Jack Plate. Also available for the Port Side.       It is very important that you complete the questionnaire when ordering this item.you

    $79.95
    Select options
  • Atlas 4" Jack Plate - L Bracket # LB-AT-4-Combo (with solid spacer)
    Spacer AT-Solid
    In Stock

    Atlas 4″ Jack Plate – L Bracket # LB-AT-4-Combo (with solid spacer)

    L Bracket – Combo with Solid Spacer to attach a Transducer Shield to the side of an Atlas Hydraulic 4” Jack Plate.

    It is very important that you complete the questionnaire when ordering this item.
    The information you provide will help us to assist you better and avoid a delay in shipping your order.

    $96.95
    Select options
  • LB-AT-6.8.10.12 without offset
    Atlas Jack Plate
    In Stock

    ATLAS 8″ to 14″ Jack Plate : L Bracket # LB-AT-4.6.8.10.12 (without offset)

    L Bracket to attach a Transducer Shield to the side of an Atlas Hydraulic 8″, 10″ and 12″ Jack Plate. PLEASE make sure that your jack plate size and Transducer Shield is listed in the description to the left.  The larger transducers require our L Bracket with an “offset” or “spacer”  to keep the trim rod from hitting the transducer.

    It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

    $49.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • Buzz Bar / Wire Terminals
    Buzz Bar / Wire Terminal # 12
    In Stock

    Buzz Bar / Wire Terminals

    Buzz Bar / Wire terminal to connect wires at the end of the dedicated line for depth finders.

    $24.95 – $25.95
    Select options This product has multiple variants. The options may be chosen on the product page
  • EXT-2.O" Extension
    EXT-2.O" Extension
    In Stock

    EXT-2.O” Extension

    An extension between an L Bracket & Transducer Shield to lower the transducer so as to avoid side viewing signal interference with hull turning chines.

    $35.00
    Add to cart
  • Do'Nut Trolling Motor Rod Support
    In Stock

    Do’Nut Trolling Motor Rod Support

    Trolling Motor Support Rod DO’NUT fits Minnkota Trolling Motors

    1/2″ Black Polyethylene Marine Board x 2-1/4 Diameter and attaches to the deck with three (3) # 8 x 1″ stainless steel phillips pan head screws which are included in the package.

    $14.95
    Add to cart
  • EXT-1.5" Extension
    EXT-1.5
    In Stock

    EXT-1.5″ Extension

    Aluminum 1.5″ Extension attached to an L. Bracket and Transducer Shield to lower the level of the transducer. This item is sometimes required on Skeeter & Bass Cat boats.

    $35.00
    Add to cart
  • EXT-3.0 Extension
    Picture shows an L Bracket + Extension + Transducer Shield
    In Stock

    EXT-3.0 Extension

    Aluminum extension attached between an L Bracket and Transducer Shield will lower the transducer if turning chines or trim tabs interfere with transducer side signal

    $40.00
    Add to cart