Our “Transducer Shield” is a protective cover that is carefully designed
to securely hold your transducers either on a trolling motor, jack plate
or setback. Our sleek & hydrodynamic design will cut through the
water for less drag while still allowing full functionality and usage of
your side and/or down imaging.
All of our shields are built of High-Quality Aluminum Alloy, then Black
Powder Coated; and specifically designed to withstand harsh marine
environments, including salt or shallow water, debris or rocks and the
daily rigors of boat handling.
No matter which transducer you have, we have a shield to protect it!

How do I know which Shield I need? 

To make finding your shield quick and easy, we have included a Go-To-Chart for your convenience.  Please choose which Brand of transducer you have, listed in the hand column of the chart.  Under each brand listed, you can determine which specific transducer you have, then the coordinating shield will be listed on the right.

IMPORTANT ADDITOINAL DETAILS: 

All shields are being installed to a trolling motor, will need two corresponding straps and are sold separate.

All shields being installed to the side of a jack plate, will need a L Bracket to complete mounting and are also sold separate.

All shields being installed to a hole shot plate or set back, may need a wedge to complete the installation and are sold separate,

The post Find Your Shield first appeared on Transducer Shield and Saver.

CLICK HERE to identify your transducer Humminbird Mega & Solix transducer

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

WARNING:  Due to the size of the transducer and Transducer Shield, when installed on a trolling motor, additional components may be required for a better fit on the trolling motor. If your trolling motor has the skeg at the front you will need a Ram Rail Kit @ $150.00 in addition to the Transducer Shield.  Please call for assistance.

Item # TM-CMSI-7.1 along with additional accessories can easily be bolted to one of our L Brackets for installation on the side of a Jack Plate OR on a Wedge for installation under a Jack Plate if a hole shot plate is present OR on a Wedge for installation on the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

Proudly Designed and Built in the USA

The post TM-CMSI-7.1 fits Humminbird® Transducer XM 14 HW CMSI T – Compact MEGA Side Imaging+ Transducer first appeared on Transducer Shield and Saver.

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

NOTE: The Transducer Shield is 6-7/8” long.   For MinnKota 70lb thrust and below (with prop and skeg on opposite ends) or Motorguide 12v 54 lb thrust and below, additional custom components may be required.  If you are unsure about the fit on your trolling motor, please call to place your order 334-514-7147.

Item # TM-XTM-75/150 T  along with additional accessories can easily be bolted to one of our L Brackets for installation on the side of a Jack Plate OR on a Wedges for installation under a Jack Plate if a hole shot plate is present OR on a Wedges for installation on the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-XTM-75/150 T to fit Humminbird XTM 9 HW MDI 75 T or XTM 9 HW MSI 150 T transducer first appeared on Transducer Shield and Saver.

CLICK HERE to identify your transducer Humminbird Mega & Solix transducer

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

WARNING:  Due to the size of the transducer and Transducer Shield, when installed on a trolling motor, additional components may be required for a better fit on the trolling motor. If your trolling motor has the skeg at the front you will need a Ram Rail Kit @ $150.00 in addition to the Transducer Shield.  Please call for assistance.

Item # TM-H-7.1 along with additional accessories can easily be bolted to one of our L Brackets for installation on the side of a Jack Plate OR on a Wedge for installation under a Jack Plate if a hole shot plate is present OR on a Wedge for installation on the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-H7.1 fits Humminbird® Solix Mega G2N or G3N DiTransducer XM 14 HW MDI T or Helix Mega G3N or G4N Di Transducer XM 9 HW MDI T first appeared on Transducer Shield and Saver.

CLICK HERE to identify your transducer Humminbird Mega & Solix and Helix transducer

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

WARNING:  Due to the size of the transducer and Transducer Shield, when installed on a trolling motor, additional components may be required for a better fit on the trolling motor. If your trolling motor has the skeg at the front you will need a Ram Rail Kit @ $150.00 in addition to the Transducer Shield.  Please call for assistance.

Item # TM-H-8.3 along with additional accessories can easily be bolted to an L Bracket for installation on the side of a Jack Plate OR on a Wedges for installation on a hole shot plate under a Jack Plate (if a hole shot plate is present) OR on a Wedge for installation on the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-H8.3 fits Humminbird® Solix or Helix Mega G2N, G3N or G4N Mega MSI T Transducer first appeared on Transducer Shield and Saver.

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

For trolling motor installation, two straps are required and are not included with the Transducer Shield.  Heavy Duty Stainless Steel, Black Powder Coated straps are available @ $5.95 each.

WARNING:  Due to the size of the transducer and Transducer Shield, when installed on a trolling motor, additional components may be required for a better fit on the trolling motor. If your trolling motor has the skeg at the front you will need a Ram Rail Kit @ $150.00 in addition to the Transducer Shield.  Please call for assistance.

Item # TM-HX-3 along with additional accessories can easily be bolted to one of our L Brackets for installation on the side of a Jack Plate OR on one of our Wedges for installation under a Jack Plate if a hole shot plate is present OR on one of our Wedges for installation under the Set Back under the boat.  For more information please go to L Brackets and/or Wedges.

This Transducer Shield WILL NOT fit the SOLIX G2N or HELIX G3N Side Image Transducer. CLICK HERE to identify your transducer   Humminbird Mega & Solix transducer

NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.

It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.

Proudly Designed and Built in the USA

See More Fish ………. Catch More Fish

The post TM-HX-3 fits Humminbird® Helix G2N Mega Si or Solix G1N Si Transducer first appeared on Transducer Shield and Saver.

If the eyelets for the hose clamp are broken on the transducer, purchase TWO of the Rams and Straps to hold the transducer in place on the trolling motor.  It will also be necessary to apply a bead of 3M 5200 Sealant (or similar product) along the top edge of the transducer to adhere to the trolling motor housing.

This item is suitable for Humminbird® trolling motor style transducers such as XTM 9 DI T;   XTM 9 DI 25 T;   XTM 9 WIDE 20 T or XTM 9 SI 180 T.   Enlarge the picture in the listing to identify the style of the transducer.  If you are unsure, please call for assistance.

Please complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.  We need to know your trolling motor information for “strap” size.

Option:  any transom style transducer can be attached to a trolling motor when using one of our Transducer Shields.

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post RAM BT-2 for Humminbird XTM trolling motor transducers first appeared on Transducer Shield and Saver.

_{It is uniquely designed to fit the following Humminbird® redesigned Down Image Transducer # XNT 9 DI T (RD). Onix Down Image Transducer # XNT 14 DI T (RD) ,  Mega Down Image Transducer # XM 9 MDI T and XNT 0 HW MDI 75 T.  It is very important that you know YOUR transducer number because Humminbird® HAS NOT changed the transducer numbers on their website.  If you are not sure which transducer you have, please click on the following link –  CLICK HERE to see more transducer information}

_{For trolling motor installation, two straps are required and are not included.  Heavy duty stainless steel, black powder coated straps are available @ $5.95 each.  NOTE: For Minnkota 74 lb thrust and below (with prop & skeg on opposite ends) OR Motorguide 12v 54 lb thrust and below, additional custom components are required.}

_{Item TM-DI-2 along with additional accessories, can easily be bolted to the side of a Jack Plate, on the hole shot plate under the jack plate OR on a boat set back.  For more information please go to L Bracket and/or wedges.}

^{NOTE:  When the transducer is attached to a Set Back, Hole Shot Plate or the side of a Jack Plate, it will not track the bottom when up on plane because the transducer is out of the water.  For bottom reading on plane, a transducer inside the hull will be required.}

_{It is very important that you complete the questionnaire when ordering this item. The information you provide will help us to assist you better and avoid a delay in shipping your order.}

CLICK HERE to see more transducer information.

_{Proudly Designed and Built in the USA}

_{See More Fish    ……    Catch More Fish}

The post TM-DI-2 fits Humminbird Down Image Xducer # XNT 9 DI T (RD), XM 9 MDI T, Mega XNT 9 HW MDI 75 T or Onix Xducer # XNT 14 DI T (RD) for Trolling Motor, Jack Plate or Set Back first appeared on Transducer Shield and Saver.

_{For trolling motor installation, two straps are required and are not included.  Heavy Duty stainless steel, black powder coated straps are available @ $5.95 each.  NOTE:  For Minnkota® 74 lb thrust and below (prop and skeg on opposite ends) OR Motorguide® 12v 54 lb thrust and below, additional custom componts are required.}

_{Item # TM-ONIX-2 along with additional accessories, can easily be bolted to the side of a Jack Plate, or on a hole shot plate under the Jack Plate, or on a boat Set Back.  For more information please go to the L Brackets and or Wedges. It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.}

_{It is very important that you complete the questionnaire when ordering this item.  The information that you provide will help us to assist you better and avoid a delay in shipping your order.}

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post TM-ONIX-2 fits Humminbird Side Image Xducer XT 14 20 HDSI T (RD) and XT 14 74 HDSI T (RD) first appeared on Transducer Shield and Saver.

^{For trolling motor installation, two straps are required and are not included.  Heavy duty stainless steel, black powder coated straps are available @ $5.95 each.} 

^{WARNING:  Due to the size of the transducer and Transducer Shield, when installed on a trolling motor, additional components may be required for a better fit on the trolling motor. If your trolling motor has the skeg at the front you will need a Ram Rail Kit @ $150.00 in addition to the Transducer Shield.  Please call for assistance.}

^{Item # TM-ONIX-1 along with additional accessories, can easily be bolted to the side of a Jack Plate, on the hole shot plate under the jack plate OR on a boat set back.  For more information please go to L Bracket and/or Wedges.}

^{It is very important that you complete the questionnaire when ordering this item.  The information you provide will help us to assist you better and avoid a delay in shipping your order.}

Proudly Designed and Built in the USA

See More Fish    ……    Catch More Fish

The post TM-ONIX-1 fits Humminbird Side Image Xducer XT 14 20 HDSI T or XT 14 74 HDSI T first appeared on Transducer Shield and Saver.