Cable Management Products - Transducer Shield and Saver

B-SQUARE-CM with Cable Management

kmsAdmin — Fri, 08 Sep 2023 15:42:19 +0000

Item # B-SQUARE-CM base plate is 3.5″ x 3.5″ x 3/4″ black polyethylene marine board and includes stainless steel hardware.

It has a built in cable management groove for a neat and tidy cable installation. It will accept up to 10 cables, depending on the combination of cable sizes.

This item creates a barrier between the fiberglass and a metal electronic mount plate, which minimizes vibration and reduces gel-coat damage.

Proudly Designed and Built in the USA

See More Fish …….. Catch More Fish

The post B-SQUARE-CM with Cable Management first appeared on Transducer Shield and Saver.

WC 2.5″ x 2.75″ x 0.5″ cable management cover

Cicero Scap — Thu, 25 May 2023 21:33:44 +0000

ITEM # WC-2.75×2.5×0.5 is perfect to draw and cover several cables. It is made in black polyethylene marine board which is 2-1/2″ x 2-3/4″ x 1/2″ thick and includes stainless steel screws.. The wire cavity is approx. 3/8″ deep by 1-1/2″ wide.

Our Products are Proudly Designed and Built in Alabama

See More Fish ………. Catch More Fish

The post WC 2.5″ x 2.75″ x 0.5″ cable management cover first appeared on Transducer Shield and Saver.

Cable Guiding Tower great for iPilot and xi5 series trolling motors

Cicero Scap — Fri, 03 Mar 2017 00:18:46 +0000

Item # MK-Cable Guiding Tower. This kit is ideal for trolling motors with “External Wiring” for example Minnkota Ulterra, Power Drive, Terrova and Motorguide xi5 series.

The purpose of the kit is to: (1) keep the external cable from getting caught up or getting hit by the propeller, (2) prevent cable damage, (3) to keep the transducer cable away from the trolling motor shaft, and (4) to line up the cable so that it doesn’t get caught on the trolling motor bracket.

The kit includes – one Heavy Duty Stainless black powder coated clamp, one aluminum base bracket, one heavy duty spring with end connector, one 7” fiberglass cable guiding tower, split loom x 7ft, two zip ties and stainless clip. Easy installation.

Proudly Designed and Built in the USA

The post Cable Guiding Tower great for iPilot and xi5 series trolling motors first appeared on Transducer Shield and Saver.

B-4 Base Plate

Cicero Scap — Tue, 23 Aug 2016 21:51:29 +0000

ITEM # B-4 ram mount base plate is 1/4″ x 4″ diameter black polyethylene marine board and includes all stainless steel hardware. This base is ideal to place between the metal Ram Mount Base and carpet on the bow of the boat. Stops the rust marks on the carpet.

It is made to fit the most popular Ram Mount Item # D-111U-C which has a 3.5″ round base and 11″ x 3″ mounting plate for the larger electronic units (2 1/4″ Ball 3 1/2″ Base).

Proudly Designed and Built in the USA

See More Fish …….. Catch More Fish

The post B-4 Base Plate first appeared on Transducer Shield and Saver.

B-3 Base Plate

Cicero Scap — Tue, 23 Aug 2016 21:43:03 +0000

ITEM # B-3 ram mount base plate is 1/4″ x 3″ diameter black polyethylene marine board and includes all stainless steel hardware. This base is ideal to place between the metal Ram Mount Base and carpet on the bow of the boat. Stops the rust marks on the carpet.

It is made to fit Ram mount # 111 which has a 2.5″ round base and 6.25 x 2″ rectangular base plate for the not so large electronic units.

Proudly Designed and Built in the USA

See More Fish …….. Catch More Fish

The post B-3 Base Plate first appeared on Transducer Shield and Saver.

B-3-CM Base Plate with cable management

kmsAdmin — Tue, 08 Apr 2014 15:48:55 +0000

ITEM # B-3-CM ram mount base plate is 3/4″ x 3″ diameter black polyethylene marine board and includes all stainless steel hardware.

It has a built in cable management groove for a neat cable installation (for up to 6 cables).

This item creates a barrier between the fiberglass and the metal ram mount plate to minimize vibration and reduces gel-coat damage.

It is made to fit Ram mount # 111 which has a 2.5″ round base and 6.25 x 2″ rectangular base plate for the not so large electronic units.

Proudly Designed and Built in the USA

See More Fish …….. Catch More Fish

The post B-3-CM Base Plate with cable management first appeared on Transducer Shield and Saver.

B-4-CM-MAX Base Plate with cable management

kmsAdmin — Mon, 07 Apr 2014 20:59:38 +0000

Item # B-4-CM-Max ram mount base is 1″ thick x 4″ diameter black polyethylene marine board and includes stainless steel hardware.

It has a built in cable management groove for multi-cable exit (up to 12 x 1/4″ cables) for a neat cable installation.

This product creates a barrier between the fiberglass and the metal ram mount plate to minimize vibration and reduces gel-coat damage.

It is designed to fit the most popular Ram Mount Item # D-111U-C recommended for the larger Depth Finders (2 1/4″ ball & 3 1/2″ base).

When ordering Item # B-4-CM-Max you may consider ordering Ram Mount Item # D-111U-C.

Proudly Designed and Built in the USA

See More Fish ……. Catch More Fish

The post B-4-CM-MAX Base Plate with cable management first appeared on Transducer Shield and Saver.

B-4-CM Base Plate with cable management

Cicero Scap — Wed, 01 Sep 2010 18:03:15 +0000

Item # B-4-CM ram mount base plate is a 3/4″ x 4″ diameter black polyethylene marine board and includes stainless steel hardware.

It has a built in cable management groove for a neat cable installation, will accept up to 10 cables, depending on the combination of cable sizes.

This item creates a barrier between the fiberglass and the metal ram mount plate to minimize vibration and reduces gel-coat damage.

It is made to fit the most popular Ram Mount Item # D-111U-C (2 1/4″ Ball 3 1/2″ Base)

When ordering ITEM # B-4-CM you may consider ordering ITEM # D-111U-C Combo which includes B-4-CM

Proudly Designed and Built in the USA

See More Fish …… Catch More Fish

The post B-4-CM Base Plate with cable management first appeared on Transducer Shield and Saver.