AP-EAG-TRI-SH will fit Lowrance® Triple Shot transducer # 000-16285-001.  To ensure that you are ordering the correct Armor Plate, please enlarge the images for transducer recognition. The Armor Plate includes stainless steel hardware and easy Do-It Yourself instructions.  Your transducer factory bracket will not be required with an Armor Plate.

Our Armor Plates are designed as an added attachment to our Spring Back Bracket for all around transducer protection.  Please consider ordering a Spring Back Bracket # SBB-5 when purchasing the Armor Plate.  The transducer is 10.50″ long and we highly recommend adding a Spring Back Bracket to your order.   If an Armor Plate breaks that has been attached to the boat without a Spring Back Bracket it has no warranty whatsoever.

All of the Products are Proudly Designed &

Built in the USA to Protect & Save

The post AP-EAG-TRI-SH to fit Lowrance® Eagle Tripleshot Transducer # 000-16285-001 on a Transom first appeared on Transducer Shield and Saver.

The culprit is likely a poor transducer angle. As simple it may be, it can be a huge problem. Your boat’s transom isn’t always perfectly perpendicular to the water, especially for flat-bottomed or pontoon boats. This misalignment sends your sonar beam off-target, resulting in washed-out pictures and missed opportunities.

But not to worry, save your expensive equipment by making a small adjustment to your transducer angle with one of our Armor Plate Shim Kits.

Benefits of our Armor Plate Shim Kit:

– True to our standards, our shims are made of highly durable ABS plastic. Designed to be durable and last!

– Each shim is universal in design and made to easily will fit any one of our Armor Plates and our Spring back bracket.

– The kits come complete with 3 different angles of 3, 5 and 20 degrees and include all additional hardware needed for each size.

– Installation is quick and easy.  Each kit comes with a guide on different variations of use so you can choose which angle adjustment would suite your needs.

The post Armor Plate Shim Kit first appeared on Transducer Shield and Saver.

^{Using this item will make your life so much easier to have everything assembled on the workbench or holding in a vice and then simply attaching the assembly onto the boat surface.}

^{This item is ideal for aluminum, fiberglass and polyethylene boats.  It’s versatile to attach a Spring Back Bracket or Armor Plate to the boat stern (back/transom area).  Installation instructions and hardware are included in the package.}  

^{Although the plate will add extra reinforcement to any Armor Plate or factory bracket to your stern, its HIGHLY recommended to use with SBB-5 Spring Back Bracket}

                    Proudly Designed and Patented in the USA

The post Stainless Steel Backing Plate first appeared on Transducer Shield and Saver.

Installing your transducer on a flat transom or pontoon boat? No problem! Our Shim Kits make it easy to achieve the perfect mounting angle. Built specifically for custom transom installations, these kits allow you to effortlessly adjust from the standard 70-degree to a 90-degree angle. Each kit includes three different shim sizes, ensuring a precise fit for your unique setup.

^{A Spring Back Bracket # SBB-5 is recommended when ordering an Armor Plate for all around transducer protection.   If an Armor Plate breaks, which has been attached to the boat without a Spring Back Bracket, it has no warranty.}

^{This Armor Plate is designed to fit Lowrance® Active Imaging HD™ 3-in-1 transducer # 000-16062-001 (approximately 10-1/4″ long x 2” wide x 1-1/4” wide).  This item includes stainless steel hardware and easy Do-It Yourself instructions.}  

NOTE: Lowrance made this transducer very similar in name and shape as their other transducers.  Please see the below the informational photo to ensure you are ordering the correct part for your corresponding transducer. 

Our Products are Proudly Designed &

Built in the USA to Protect & Save

The post AP-AI-HD for Lowrance® ActiveImaging HD™ 3-in-1 transducer # 000-16062-001 first appeared on Transducer Shield and Saver.

Features of the FSFP:

• Hand Operated Stainless Steel Drive System
• Oversized Directional Indicator with Locking Split Pin   Connector for EASY Handle Operation
• Total length of the FSFP is 40 1/2”, which is tailored to fit all trolling motors
• 17” x 1 3/4” Aluminum Tubing allows you to adjust the height on the trolling motor
• The 1” Inner Fiberglass Shaft is supported by four Delrin bearing bushings to provide SMOOTH operation
• Fiberglass lower shaft can be replaced easily if damaged
• Includes a gray Split Bushing and Safety Washer to attach the Forward Facing Transducer
• Solid Grip Handle with 6’ extendable Aluminum Rod include Stainless Steel Braided Flexible Shaft

The post FISH SNIFF FIBER POLE first appeared on Transducer Shield and Saver.

The post Humminbird 360 Accessory first appeared on Transducer Shield and Saver.

The post Full Receiver Ring Minnkota Ultrex Trolling Motor first appeared on Transducer Shield and Saver.

The post Mini Receiver Ring Minnkota Ultrex Trolling Motor first appeared on Transducer Shield and Saver.

The post Full Receiver Ring Lowrance Ghost Trolling Motor first appeared on Transducer Shield and Saver.

The post Mini Receiver Ring Lowrance Ghost Trolling Motor first appeared on Transducer Shield and Saver.